Meu dispositivo de banda larga móvel não funciona no Ubuntu 13.10

Question

Meu dispositivo de banda larga móvel 1c9e:6061 OMEGA TECHNOLOGY WL-72B 3.5G MODEM não funciona no Ubuntu 13.10 ou em qualquer distribuição baseada no Ubuntu. Mas funciona bem no Fedora 19 e no Fuduntu.

no Ubuntu:

# lsusb
Bus 002 Device 011: ID 0cf3:3004 Atheros Communications, Inc. 
Bus 002 Device 018: ID 1c9e:6061 OMEGA TECHNOLOGY WL-72B 3.5G MODEM
Bus 002 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 001 Device 003: ID 0ac8:c349 Z-Star Microelectronics Corp. 
Bus 001 Device 004: ID 04fc:0013 Sunplus Technology Co., Ltd ViewMate Desktop Mouse CC2201
Bus 001 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub

# usb-devices
T:  Bus=02 Lev=02 Prnt=02 Port=01 Cnt=02 Dev#=  7 Spd=480 MxCh= 0
D:  Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs=  1
P:  Vendor=1c9e ProdID=6061 Rev=00.00
S:  Manufacturer=Qualcomm, Incorporated
S:  Product=Qualcomm CDMA Technologies MSM
S:  SerialNumber=000000000002
C:  #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr=500mA
I:  If#= 0 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50 Driver=(none)

# dmesg
[  179.197604] usb 2-1.2: new high-speed USB device number 7 using ehci-pci
[  179.293119] usb 2-1.2: New USB device found, idVendor=1c9e, idProduct=6061
[  179.293130] usb 2-1.2: New USB device strings: Mfr=3, Product=2, SerialNumber=4
[  179.293137] usb 2-1.2: Product: Qualcomm CDMA Technologies MSM
[  179.293142] usb 2-1.2: Manufacturer: Qualcomm, Incorporated
[  179.293147] usb 2-1.2: SerialNumber: 000000000002
[  179.295844] usb-storage 2-1.2:1.0: USB Mass Storage device detected
[  179.295918] scsi5 : usb-storage 2-1.2:1.0
[  180.295738] scsi 5:0:0:0: Direct-Access     HSPA     MMC Storage      2.31 PQ: 0 ANSI: 2
[  180.296575] scsi 5:0:0:1: CD-ROM            HSPA     MMC Storage      2.31 PQ: 0 ANSI: 2
[  180.296884] sd 5:0:0:0: Attached scsi generic sg3 type 0
[  180.308339] sr1: scsi-1 drive
[  180.308488] sr 5:0:0:1: Attached scsi CD-ROM sr1
[  180.308570] sr 5:0:0:1: Attached scsi generic sg4 type 5
[  180.315955] sd 5:0:0:0: [sdc] Attached SCSI removable disk
[  180.527311] ISO 9660 Extensions: Microsoft Joliet Level 1
[  180.561077] ISOFS: changing to secondary root

No Fedora 19

# lsusb
Bus 001 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub
Bus 002 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 001 Device 003: ID 04fc:0013 Sunplus Technology Co., Ltd ViewMate Desktop Mouse CC2201
Bus 001 Device 004: ID 0ac8:c349 Z-Star Microelectronics Corp. 
Bus 002 Device 003: ID 14cd:125c Super Top SD card reader
Bus 002 Device 010: ID 1c9e:6061 OMEGA TECHNOLOGY WL-72B 3.5G MODEM

# usb-devices
T:  Bus=02 Lev=02 Prnt=02 Port=01 Cnt=02 Dev#=  7 Spd=480 MxCh= 0
D:  Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs=  1
P:  Vendor=1c9e ProdID=6061 Rev=00.00
S:  Manufacturer=Qualcomm, Incorporated
S:  Product=Qualcomm CDMA Technologies MSM
S:  SerialNumber=000000000002
C:  #Ifs= 4 Cfg#= 1 Atr=e0 MxPwr=500mA
I:  If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=option
I:  If#= 1 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option
I:  If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option
I:  If#= 3 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50 Driver=usb-storage

# dmesg
[   74.655202] usb 2-1.2: New USB device found, idVendor=1c9e, idProduct=6061
[   74.655212] usb 2-1.2: New USB device strings: Mfr=3, Product=2, SerialNumber=4
[   74.655218] usb 2-1.2: Product: Qualcomm CDMA Technologies MSM
[   74.655223] usb 2-1.2: Manufacturer: Qualcomm, Incorporated
[   74.655228] usb 2-1.2: SerialNumber: 000000000002
[   74.660260] scsi6 : usb-storage 2-1.2:1.0
[   77.720190] usb 2-1.2: USB disconnect, device number 6
[   77.897799] usb 2-1.2: new high-speed USB device number 7 using ehci-pci
[   77.986096] usb 2-1.2: New USB device found, idVendor=1c9e, idProduct=6061
[   77.986107] usb 2-1.2: New USB device strings: Mfr=2, Product=1, SerialNumber=3
[   77.986113] usb 2-1.2: Product: Qualcomm CDMA Technologies MSM
[   77.986118] usb 2-1.2: Manufacturer: Qualcomm, Incorporated
[   77.986123] usb 2-1.2: SerialNumber: 000000000002
[   77.990175] scsi7 : usb-storage 2-1.2:1.3
[   79.014680] scsi 7:0:0:0: Direct-Access     HSPA     MMC Storage      2.31 PQ: 0 ANSI: 2
[   79.015669] scsi 7:0:0:1: CD-ROM            HSPA     MMC Storage      2.31 PQ: 0 ANSI: 2
[   79.018190] sd 7:0:0:0: Attached scsi generic sg3 type 0
[   79.020417] sd 7:0:0:0: [sdc] Attached SCSI removable disk
[   79.023790] sr1: scsi-1 drive
[   79.024252] sr 7:0:0:1: Attached scsi CD-ROM sr1
[   79.024526] sr 7:0:0:1: Attached scsi generic sg4 type 5
[   79.256276] ISO 9660 Extensions: Microsoft Joliet Level 1
[   79.258015] ISOFS: changing to secondary root
[   79.259663] SELinux: initialized (dev sr1, type iso9660), uses genfs_contexts
[   79.551148] usbcore: registered new interface driver option
[   79.552698] usbserial: USB Serial support registered for GSM modem (1-port)
[   79.570265] option 2-1.2:1.0: GSM modem (1-port) converter detected
[   79.570848] usb 2-1.2: GSM modem (1-port) converter now attached to ttyUSB0
[   79.570911] option 2-1.2:1.1: GSM modem (1-port) converter detected
[   79.571283] usb 2-1.2: GSM modem (1-port) converter now attached to ttyUSB1
[   79.571338] option 2-1.2:1.2: GSM modem (1-port) converter detected
[   79.571716] usb 2-1.2: GSM modem (1-port) converter now attached to ttyUSB2
[  115.069111] PPP generic driver version 2.4.2
[  115.121844] PPP BSD Compression module registered
[  115.146879] PPP Deflate Compression module registered

Existe alguma solução para isso? (O.S é o Ubuntu 13.10)

    

Answer 1

Encontrei duas soluções.TNX para respostas.

1º:

$ sudo su
# gedit /etc/usb_modeswitch.conf

DisableSwitching=0 i alterou 0 para 1 save.

# eject /dev/sr1 2> /dev/null cada vez que eu conecto o modem no PC.

2º: (é o melhor)

$ sudo su
# gedit /usr/bin/anyname

coloque o seguinte:

#!/bin/bash
echo 1c9e 6061 > /sys/bus/usb-serial/drivers/option1/new_id

salvar saída

Nota: 1c9e 6061 é o ID do dispositivo obtido a partir do comando lsusb

# chmod +x /usr/bin/anyname
# gedit /etc/udev/rules.d/option.rules

coloque o seguinte:

ATTRS{idVendor}=="1c9e", ATTRS{idProduct}=="6061", RUN+="/usr/bin/anyname"
ATTRS{idVendor}=="1c9e", ATTRS{idProduct}=="6061", RUN+="/sbin/modprobe option"

salvar saída

# reboot

    

Answer 2

Else pode usar o sakis3g para se conectar. Instale e execute o script sakis3g , ele abrirá uma janela interativa da GUI. Em seguida, forneça seus detalhes de banda larga móvel conforme necessário (conecte-se ao dispositivo 3G, usb, Qualcomm CDMA Technologies MSM, apn, nome de usuário e senha, etc. nos respectivos campos.) Consulte este link para referência.