Eu tenho um modem BSNL EVDO que estava funcionando bem no Ubuntu 10.10, 11.04 e 11.10. Ontem, após a atualização para 12.04 via gerenciador de atualização, ele não está funcionando e nem sequer foi detectado no gerenciador de rede. Eu baixei o ISO (64 bits) e tentei uma nova instalação depois de formatar a partição, sem efeito.
Estou surpreso que a atualização tenha quebrado, por favor ajude !!!!
PS :: testado e garantido que ainda está funcionando bem no windows
Aqui está a saída em /var/log/usb_modeswitch.log
USB_ModeSwitch log from Sat Apr 28 12:13:18 2012
Using global config file: /etc/usb_modeswitch.conf
Raw args from udev: /2-1.2:1.0
Bus ID for device not given by udev.
Trying to determine it from kernel name (2-1.2:1.0) ...
Using top device dir /sys/bus/usb/devices/2-1.2
USB dir exists: /sys/bus/usb/devices/2-1.2
SCSI dir exists: /sys/bus/usb/devices/2-1.2
Warning: SCSI attribute "vendor" not readable.
Warning: SCSI attribute "model" not readable.
Warning: SCSI attribute "rev" not readable.
----------------
USB values from sysfs:
idVendor 1c9e
idProduct 9e00
manufacturer Qualcomm, Incorporated
product USB MMC Storage
serial 000000000002
bNumConfigurations 1
----------------
bNumConfigurations is 1 - don't check for active configuration
Found packed config collection /usr/share/usb_modeswitch/configPack.tar.gz
Searching entries named: /usr/share/usb_modeswitch/1c9e:9e00*
Searching overriding entries named: /etc/usb_modeswitch.d/1c9e:9e00*
SCSI attributes not needed, moving on.
Extracting config 1c9e:9e00 from collection /usr/share/usb_modeswitch/configPack.tar.gz
config: TargetClass set to ff
Driver module is "option", ID path is /sys/bus/usb-serial/drivers/option1
! matched, now switching
Command to be run:
/usr/sbin/usb_modeswitch -I -W -D -s 20 -c /run/usb_modeswitch/current_cfg -u -1 -v 1c9e -p 9e00 2>&1
Verbose debug output of usb_modeswitch and libusb follows
(Note that some USB errors are expected in the process)
--------------------------------
tail: /var/log/usb_modeswitch.log: file truncated
USB_ModeSwitch log from Sat Apr 28 12:13:20 2012
Using global config file: /etc/usb_modeswitch.conf
Raw args from udev: /2-1.2:1.5
Bus ID for device not given by udev.
Trying to determine it from kernel name (2-1.2:1.5) ...
Using top device dir /sys/bus/usb/devices/2-1.2
USB dir exists: /sys/bus/usb/devices/2-1.2
Warning: USB attribute "serial" not readable.
SCSI dir exists: /sys/bus/usb/devices/2-1.2
Warning: SCSI attribute "vendor" not readable.
Warning: SCSI attribute "model" not readable.
Warning: SCSI attribute "rev" not readable.
----------------
USB values from sysfs:
idVendor 1c9e
idProduct 9e00
manufacturer Qualcomm, Incorporated
product Qualcomm CDMA Technologies MSM
serial (null)
bNumConfigurations 1
----------------
bNumConfigurations is 1 - don't check for active configuration
Found packed config collection /usr/share/usb_modeswitch/configPack.tar.gz
Searching entries named: /usr/share/usb_modeswitch/1c9e:9e00*
Searching overriding entries named: /etc/usb_modeswitch.d/1c9e:9e00*
SCSI attributes not needed, moving on.
Reading config file: /run/usb_modeswitch/current_cfg
* usb_modeswitch: handle USB devices with multiple modes
* Version 1.2.3 (C) Josua Dietze 2012
* Based on libusb0 (0.1.12 and above)
! PLEASE REPORT NEW CONFIGURATIONS !
DefaultVendor= 0x1c9e
DefaultProduct= 0x9e00
TargetVendor= not set
TargetProduct= not set
TargetClass= 0xff
TargetProductList=""
DetachStorageOnly=0
HuaweiMode=0
SierraMode=0
SonyMode=0
QisdaMode=0
GCTMode=0
KobilMode=0
SequansMode=0
MobileActionMode=0
CiscoMode=0
MessageEndpoint= not set
MessageContent="55534243123456780000000000000606f50402527000000000000000000000"
NeedResponse=0
ResponseEndpoint= not set
InquireDevice disabled
Success check enabled, max. wait time 20 seconds
System integration mode enabled
Looking for target devices ...
No devices in target mode or class found
Looking for default devices ...
searching devices, found USB ID 1d6b:0003
searching devices, found USB ID 1d6b:0002
searching devices, found USB ID 1c9e:9e00
found matching vendor ID
found matching product ID
target class ff not matching
adding device
searching devices, found USB ID 8087:0024
searching devices, found USB ID 1d6b:0002
searching devices, found USB ID 0bda:0139
searching devices, found USB ID 058f:a014
searching devices, found USB ID 0cf3:3005
searching devices, found USB ID 8087:0024
searching devices, found USB ID 1d6b:0002
Found device in default mode, class or configuration (1)
Accessing device 007 on bus 002 ...
Skipping the check for the current configuration
Using first interface: 0x00
Using endpoints 0x08 (out) and 0x87 (in)
USB description data (for identification)
-------------------------
Manufacturer: Qualcomm, Incorporated
Product: USB MMC Storage
Serial No.: 000000000002
-------------------------
Looking for active driver ...
OK, driver found ("usb-storage")
OK, driver "usb-storage" detached
Setting up communication with interface 0
Using endpoint 0x08 for message sending ...
Trying to send message 1 to endpoint 0x08 ...
OK, message successfully sent
Resetting response endpoint 0x87
Resetting message endpoint 0x08
Device is gone, skipping any further commands
Checking for mode switch (max. 20 times, once per second) ...
Searching for target devices ...
searching devices, found USB ID 1d6b:0003
searching devices, found USB ID 1d6b:0002
searching devices, found USB ID 8087:0024
searching devices, found USB ID 1d6b:0002
searching devices, found USB ID 0bda:0139
searching devices, found USB ID 058f:a014
searching devices, found USB ID 0cf3:3005
searching devices, found USB ID 8087:0024
searching devices, found USB ID 1d6b:0002
Searching for target devices ...
searching devices, found USB ID 1d6b:0003
searching devices, found USB ID 1d6b:0002
searching devices, found USB ID 1c9e:9e00
found matching vendor ID
found matching product ID
target class ff matching
adding device
searching devices, found USB ID 8087:0024
searching devices, found USB ID 1d6b:0002
searching devices, found USB ID 0bda:0139
searching devices, found USB ID 058f:a014
searching devices, found USB ID 0cf3:3005
searching devices, found USB ID 8087:0024
searching devices, found USB ID 1d6b:0002
Found target device, now opening
Found target device 008 on bus 002
Target device description data
-------------------------
Manufacturer: Qualcomm, Incorporated
Product: Qualcomm CDMA Technologies MSM
Serial No.: not provided
-------------------------
Found correct target device
Mode switch succeeded. Bye.
ok:1c9e:9e00
--------------------------------
(end of usb_modeswitch output)
Checking success of mode switch for max. 20 seconds ... Reading attributes ...
USB dir exists: /sys/bus/usb/devices/2-1.2
Warning: USB attribute "serial" not readable.
All attributes matched
Mode switching was successful, found 1c9e:9e00 (Qualcomm, Incorporated: Qualcomm CDMA Technologies MSM)Now checking for bound driver ...
no driver has bound to interface 0 yet
Device not in "bind_list" yet, bind it now
modprobe not foundModule loader is (null)
Can't do anymore without module loader; get "modtools"!
driver binding failed
Checking for AVOID_RESET_QUIRK kernel attribute
AVOID_RESET_QUIRK activated
All done, exiting
entradas dmesg
[ 43.068088] usb 2-1.2: new full-speed USB device number 3 using ehci_hcd
[ 43.189986] Initializing USB Mass Storage driver...
[ 43.190211] scsi7 : usb-storage 2-1.2:1.0
[ 43.190275] usbcore: registered new interface driver usb-storage
[ 43.190276] USB Mass Storage support registered.
[ 43.266543] usbcore: registered new interface driver uas
[ 44.188822] scsi 7:0:0:0: CD-ROM USBModem Disk 2.31 PQ: 0 ANSI: 2
[ 44.195201] sr1: scsi3-mmc drive: 0x/0x caddy
[ 44.195414] sr 7:0:0:0: Attached scsi CD-ROM sr1
[ 44.195487] sr 7:0:0:0: Attached scsi generic sg3 type 5
[ 44.292778] sr1: CDROM (ioctl) error, command: Xpwrite, Read disk info 51 00 00 00 00 00 00 00 02 00
[ 44.292786] sr: Sense Key : Hardware Error [current]
[ 44.292789] sr: Add. Sense: No additional sense information
[ 44.448614] sr1: CDROM (ioctl) error, command: Xpwrite, Read disk info 51 00 00 00 00 00 00 00 02 00
[ 44.448622] sr: Sense Key : Hardware Error [current]
[ 44.448624] sr: Add. Sense: No additional sense information
[ 44.680705] usb 2-1.2: USB disconnect, device number 3
[ 45.903611] usb 2-1.2: new full-speed USB device number 4 using ehci_hcd
[ 45.998999] scsi8 : usb-storage 2-1.2:1.5
[ 46.996804] scsi 8:0:0:0: Direct-Access USBModem Disk 2.31 PQ: 0 ANSI: 2
[ 46.997717] sd 8:0:0:0: Attached scsi generic sg3 type 0
[ 47.003776] sd 8:0:0:0: [sdc] Attached SCSI removable disk
[ 131.624851] usb 2-1.2: USB disconnect, device number 4
[ 137.005910] usb 2-1.2: new full-speed USB device number 5 using ehci_hcd
[ 137.101084] scsi9 : usb-storage 2-1.2:1.0
[ 138.098644] scsi 9:0:0:0: CD-ROM USBModem Disk 2.31 PQ: 0 ANSI: 2
[ 138.106114] sr1: scsi3-mmc drive: 0x/0x caddy
[ 138.106531] sr 9:0:0:0: Attached scsi CD-ROM sr1
[ 138.106811] sr 9:0:0:0: Attached scsi generic sg3 type 5
[ 138.198600] sr1: CDROM (ioctl) error, command: Xpwrite, Read disk info 51 00 00 00 00 00 00 00 02 00
[ 138.198627] sr: Sense Key : Hardware Error [current]
[ 138.198635] sr: Add. Sense: No additional sense information
[ 138.456257] usb 2-1.2: USB disconnect, device number 5
[ 139.677709] usb 2-1.2: new full-speed USB device number 6 using ehci_hcd
[ 139.774058] scsi10 : usb-storage 2-1.2:1.5
[ 140.774624] scsi 10:0:0:0: Direct-Access USBModem Disk 2.31 PQ: 0 ANSI: 2
[ 140.777200] sd 10:0:0:0: Attached scsi generic sg3 type 0
[ 140.783764] sd 10:0:0:0: [sdc] Attached SCSI removable disk
[ 156.867977] usb 2-1.2: USB disconnect, device number 6
[ 216.594721] usb 2-1.1: new full-speed USB device number 7 using ehci_hcd
[ 216.689732] scsi11 : usb-storage 2-1.1:1.0
[ 217.687395] scsi 11:0:0:0: CD-ROM USBModem Disk 2.31 PQ: 0 ANSI: 2
[ 217.694689] sr1: scsi3-mmc drive: 0x/0x caddy
[ 217.695092] sr 11:0:0:0: Attached scsi CD-ROM sr1
[ 217.695397] sr 11:0:0:0: Attached scsi generic sg3 type 5
[ 217.787287] sr1: CDROM (ioctl) error, command: Xpwrite, Read disk info 51 00 00 00 00 00 00 00 02 00
[ 217.787312] sr: Sense Key : Hardware Error [current]
[ 217.787321] sr: Add. Sense: No additional sense information
[ 218.117857] usb 2-1.1: USB disconnect, device number 7
[ 219.338270] usb 2-1.1: new full-speed USB device number 8 using ehci_hcd
[ 219.433452] scsi12 : usb-storage 2-1.1:1.5
[ 220.430998] scsi 12:0:0:0: Direct-Access USBModem Disk 2.31 PQ: 0 ANSI: 2
[ 220.432676] sd 12:0:0:0: Attached scsi generic sg3 type 0
[ 220.438016] sd 12:0:0:0: [sdc] Attached SCSI removable disk