Ok, eu tenho vasculhado os vários quadros de mensagens com pouco sucesso na abordagem deste assunto.
Eu tenho um antigo PowerBook G4 e estou tendo problemas com o sistema sem fio.
O cartão está ativo, posso ver as redes sem fio no Network Manager, mas quando tento conectar-me, ele me pede repetidamente a senha da rede, que eu sei estar correta.
Ainda não consegui encontrar uma solução clara para isso. Alguma idéia?
Saída do script de informações sem fio abaixo
########## wireless info START ##########
Report from: 24 Oct 2017 13:29 EDT -0400
Booted last: 24 Oct 2017 11:41 EDT -0400
Script from: 25 Mar 2017 07:04 UTC +0000
##### release ###########################
Distributor ID: Ubuntu
Description: Ubuntu 14.04.5 LTS
Release: 14.04
Codename: trusty
##### kernel ############################
Linux 4.4.0-97-powerpc-smp #120~14.04.1-Ubuntu SMP Wed Sep 20 15:54:00 UTC 2017 ppc ppc ppc GNU/Linux
, ro, quiet, splash, radeon.agpmode=-1,
##### desktop ###########################
Lubuntu
##### lspci #############################
0001:24:0f.0 Ethernet controller [0200]: Apple Inc. UniNorth GMAC (Sun GEM) [106b:0021] (rev 01)
Kernel driver in use: gem
ff08:00:0b.0 Host bridge [0600]: Apple Inc. UniNorth 1.5 AGP [106b:002d]
##### lsusb #############################
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 003: ID 0b95:1790 ASIX Electronics Corp. AX88179 Gigabit Ethernet
Bus 001 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
##### PCMCIA card info ##################
PRODID_1=""
PRODID_2=""
PRODID_3=""
PRODID_4=""
MANFID=0000,0000
FUNCID=255
##### rfkill ############################
0: phy0: Wireless LAN
Soft blocked: no
Hard blocked: no
##### lsmod #############################
airport 3709 0
orinoco 73480 1 airport
cfg80211 499172 1 orinoco
##### interfaces ########################
auto lo
iface lo inet loopback
auto eth2
iface eth2 inet dhcp
wpa-essid JSNET
wpa-psk <WPA key removed>
##### ifconfig ##########################
eth0 Link encap:Ethernet HWaddr <MAC 'eth0' [IF1]>
UP BROADCAST MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:0 (0.0 B) TX bytes:0 (0.0 B)
eth1 Link encap:Ethernet HWaddr <MAC 'eth1' [IF2]>
inet addr:192.168.1.14 Bcast:192.168.1.255 Mask:255.255.255.0
inet6 addr: fe80::<IP6 'eth1' [IF2]>/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:24034 errors:6 dropped:1 overruns:0 frame:6
TX packets:21838 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:17031980 (17.0 MB) TX bytes:2598946 (2.5 MB)
eth2 Link encap:Ethernet HWaddr <MAC 'eth2' [IF3]>
UP BROADCAST MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:0 (0.0 B) TX bytes:0 (0.0 B)
Interrupt:57
lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
inet6 addr: ::1/128 Scope:Host
UP LOOPBACK RUNNING MTU:65536 Metric:1
RX packets:462 errors:0 dropped:0 overruns:0 frame:0
TX packets:462 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1
RX bytes:35977 (35.9 KB) TX bytes:35977 (35.9 KB)
##### iwconfig ##########################
lo no wireless extensions.
eth1 no wireless extensions.
eth0 no wireless extensions.
eth2 IEEE 802.11b ESSID:""
Mode:Managed Frequency:2.422 GHz Access Point: None
Bit Rate:11 Mb/s Sensitivity:1/0
Retry short long limit:8 RTS thr=2347 B Fragment thr:off
Power Management:off
Link Quality=0/70 Signal level=-122 dBm Noise level=-122 dBm
Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:44
Tx excessive retries:0 Invalid misc:0 Missed beacon:0
##### route #############################
Kernel IP routing table
Destination Gateway Genmask Flags Metric Ref Use Iface
0.0.0.0 192.168.1.1 0.0.0.0 UG 0 0 0 eth1
192.168.1.0 0.0.0.0 255.255.255.0 U 1 0 0 eth1
##### resolv.conf #######################
nameserver 192.168.1.1
nameserver 127.0.1.1
##### network managers ##################
Installed:
NetworkManager
Wicd
Running:
root 2804 1 0 11:54 ? 00:00:04 NetworkManager
##### NetworkManager info ###############
NetworkManager Tool
State: connected (global)
- Device: eth1 [Wired connection 1] -------------------------------------------
Type: Wired
Driver: ax88179_178a
State: connected
Default: yes
HW Address: <MAC 'eth1' [IF2]>
Capabilities:
Carrier Detect: yes
Speed: 100 Mb/s
Wired Properties
Carrier: on
IPv4 Settings:
Address: 192.168.1.14
Prefix: 24 (255.255.255.0)
Gateway: 192.168.1.1
DNS: 192.168.1.1
- Device: eth0 -----------------------------------------------------------------
Type: Wired
Driver: gem
State: unavailable
Default: no
HW Address: <MAC 'eth0' [IF1]>
Capabilities:
Carrier Detect: yes
Wired Properties
Carrier: off
- Device: eth2 -----------------------------------------------------------------
Type: 802.11 WiFi
Driver: airport
State: disconnected
Default: no
HW Address: <MAC 'eth2' [IF3]>
Capabilities:
Wireless Properties
WEP Encryption: yes
WPA Encryption: yes
Wireless Access Points
The Smokehouse: Infra, <MAC 'The Smokehouse' [AN1]>, Freq 2437 MHz, Rate 54 Mb/s, Strength 29 WPA2
JSNET: Infra, <MAC 'JSNET' [AC1]>, Freq 2462 MHz, Rate 54 Mb/s, Strength 69 WPA WPA2
DIRECT-6C-HP OfficeJet 3830: Infra, <MAC 'DIRECT-6C-HP OfficeJet 3830' [AN3]>, Freq 2462 MHz, Rate 54 Mb/s, Strength 9 WPA2
PRPTCO: Infra, <MAC 'PRPTCO' [AN4]>, Freq 2437 MHz, Rate 54 Mb/s, Strength 25 WPA2
xfinitywifi: Infra, <MAC 'xfinitywifi' [AN5]>, Freq 2437 MHz, Rate 54 Mb/s, Strength 27
LatoyaNet: Infra, <MAC 'LatoyaNet' [AN6]>, Freq 2412 MHz, Rate 54 Mb/s, Strength 15 WPA WPA2
##### NetworkManager.state ##############
[main]
NetworkingEnabled=true
WirelessEnabled=true
WWANEnabled=true
WimaxEnabled=true
##### NetworkManager.conf ###############
[main]
plugins=ifupdown,keyfile,ofono
dns=dnsmasq
[ifupdown]
managed=true
##### NetworkManager profiles ###########
[[/etc/NetworkManager/system-connections/JSNET]] (600 root)
[connection] id=JSNET | type=802-11-wireless
[802-11-wireless] ssid=JSNET | mac-address=<MAC 'eth2' [IF3]>
[ipv4] method=auto
[ipv6] method=auto
[[/etc/NetworkManager/system-connections/Wi-Fi connection 1]] (600 root)
[connection] id=Wi-Fi connection 1 | type=802-11-wireless
[802-11-wireless] ssid=JSNET
[ipv6] method=auto
[ipv4] method=auto
##### iw reg get ########################
Region: America/New_York (based on set time zone)
country 00:
(2402 - 2472 @ 40), (3, 20)
(2457 - 2482 @ 40), (3, 20), PASSIVE-SCAN, NO-IBSS
(2474 - 2494 @ 20), (3, 20), NO-OFDM, PASSIVE-SCAN, NO-IBSS
(5170 - 5250 @ 40), (3, 20), PASSIVE-SCAN, NO-IBSS
(5735 - 5835 @ 40), (3, 20), PASSIVE-SCAN, NO-IBSS
##### iwlist channels ###################
lo no frequency information.
eth1 no frequency information.
eth0 no frequency information.
eth2 11 channels in total; available frequencies :
Channel 01 : 2.412 GHz
Channel 02 : 2.417 GHz
Channel 03 : 2.422 GHz
Channel 04 : 2.427 GHz
Channel 05 : 2.432 GHz
Channel 06 : 2.437 GHz
Channel 07 : 2.442 GHz
Channel 08 : 2.447 GHz
Channel 09 : 2.452 GHz
Channel 10 : 2.457 GHz
Channel 11 : 2.462 GHz
Current Frequency:2.422 GHz (Channel 3)
##### iwlist scan #######################
lo Interface doesn't support scanning.
eth1 Interface doesn't support scanning.
eth0 Interface doesn't support scanning.
Channel occupancy:
1 APs on Frequency:2.462 GHz (Channel 11)
eth2 Scan completed :
Cell 01 - Address: <MAC 'JSNET' [AC1]>
Channel:11
Frequency:2.462 GHz (Channel 11)
Quality=61/70 Signal level=-49 dBm
Encryption key:on
ESSID:"JSNET"
Bit Rates:1 Mb/s; 2 Mb/s; 5.5 Mb/s; 11 Mb/s; 18 Mb/s
24 Mb/s; 36 Mb/s; 54 Mb/s
Bit Rates:6 Mb/s; 9 Mb/s; 12 Mb/s; 48 Mb/s
Mode:Master
Extra:tsf=00000000ec1fa370
Extra: Last beacon: 164ms ago
IE: IEEE 802.11i/WPA2 Version 1
Group Cipher : TKIP
Pairwise Ciphers (2) : CCMP TKIP
Authentication Suites (1) : PSK
IE: WPA Version 1
Group Cipher : TKIP
Pairwise Ciphers (2) : CCMP TKIP
Authentication Suites (1) : PSK
##### module infos ######################
[airport]
filename: /lib/modules/4.4.0-97-powerpc-smp/kernel/drivers/net/wireless/orinoco/airport.ko
license: Dual MPL/GPL
description: Driver for the Apple Airport wireless card.
author: Benjamin Herrenschmidt <[email protected]>
srcversion: 21052957383B9E0FA798721
depends: orinoco
intree: Y
vermagic: 4.4.0-97-powerpc-smp SMP mod_unload modversions
[cfg80211]
filename: /lib/modules/4.4.0-97-powerpc-smp/kernel/net/wireless/cfg80211.ko
description: wireless configuration support
license: GPL
author: Johannes Berg
srcversion: 4B104D07EC5684C9E39533C
depends:
intree: Y
vermagic: 4.4.0-97-powerpc-smp SMP mod_unload modversions
parm: bss_entries_limit:limit to number of scan BSS entries (per wiphy, default 1000) (int)
parm: ieee80211_regdom:IEEE 802.11 regulatory domain code (charp)
parm: cfg80211_disable_40mhz_24ghz:Disable 40MHz support in the 2.4GHz band (bool)
##### module parameters #################
[cfg80211]
bss_entries_limit: 1000
cfg80211_disable_40mhz_24ghz: N
ieee80211_regdom: 00
##### /etc/modules ######################
airport
apm_emu
snd-powermac
##### modprobe options ##################
[/etc/modprobe.d/blacklist-ath_pci.conf]
blacklist ath_pci
[/etc/modprobe.d/blacklist.conf]
blacklist evbug
blacklist usbmouse
blacklist usbkbd
blacklist eepro100
blacklist de4x5
blacklist eth1394
blacklist snd_intel8x0m
blacklist snd_aw2
blacklist i2c_i801
blacklist prism54
blacklist bcm43xx
blacklist garmin_gps
blacklist asus_acpi
blacklist snd_pcsp
blacklist pcspkr
blacklist amd76x_edac
[/etc/modprobe.d/blacklist.local.conf]
blacklist snd-aoa-codec-tas
blacklist snd-aoa-fabric-layout
blacklist snd-aoa-i2sbus
blacklist snd-aoa-soundbus
blacklist snd-aoa
[/etc/modprobe.d/blacklist-rare-network.conf]
alias net-pf-3 off
alias net-pf-6 off
alias net-pf-9 off
alias net-pf-11 off
alias net-pf-12 off
alias net-pf-19 off
alias net-pf-21 off
alias net-pf-36 off
[/etc/modprobe.d/iwlwifi.conf]
remove iwlwifi \
(/sbin/lsmod | grep -o -e ^iwlmvm -e ^iwldvm -e ^iwlwifi | xargs /sbin/rmmod) \
&& /sbin/modprobe -r mac80211
[/etc/modprobe.d/mlx4.conf]
softdep mlx4_core post: mlx4_en
##### rc.local ##########################
exit 0
##### pm-utils ##########################
##### udev rules ########################
[/etc/udev/rules.d/70-persistent-net.rules]
# PCI device 0x106b:0x0021 (gem)
SUBSYSTEM=="net", ACTION=="add", DRIVERS=="?*", ATTR{address}=="<MAC 'eth0' [IF1]>", ATTR{dev_id}=="0x0", ATTR{type}=="1", KERNEL=="eth*", NAME="eth0"
# USB device 0x:0x (ax88179_178a)
SUBSYSTEM=="net", ACTION=="add", DRIVERS=="?*", ATTR{address}=="<MAC 'eth1' [IF2]>", ATTR{dev_id}=="0x0", ATTR{type}=="1", KERNEL=="eth*", NAME="eth1"
# PCI device 0x106b:0x0022 (airport)
SUBSYSTEM=="net", ACTION=="add", DRIVERS=="?*", ATTR{address}=="<MAC 'eth2' [IF3]>", ATTR{dev_id}=="0x0", ATTR{type}=="1", KERNEL=="eth*", NAME="eth2"
##### dmesg #############################
[ 46.755846] eth2: Lucent/Agere firmware doesn't support manual roaming (repeated 6 times)
[ 170.574540] IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready
[ 170.781065] eth2: Lucent/Agere firmware doesn't support manual roaming
[ 172.315356] ax88179_178a 1-1:1.0 eth1: ax88179 - Link status is: 1 (repeated 2 times)
[ 172.364473] IPv6: ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
[ 173.097636] IPv6: ADDRCONF(NETDEV_UP): eth2: link is not ready
[ 183.960530] IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready
[ 183.963247] ax88179_178a 1-1:1.0 eth1: ax88179 - Link status is: 1
[ 184.688464] IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready
[ 186.587203] ax88179_178a 1-1:1.0 eth1: ax88179 - Link status is: 1 (repeated 2 times)
[ 186.636310] IPv6: ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
[ 347.647533] gem 0001:24:0f.0 eth0: Found BCM5421 PHY
[ 347.648021] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 943.581125] IPv6: ADDRCONF(NETDEV_UP): eth2: link is not ready
[ 944.025669] IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready
[ 944.052979] ax88179_178a 1-1:1.0 eth1: ax88179 - Link status is: 1
[ 944.149675] gem 0001:24:0f.0 eth0: Found BCM5421 PHY
[ 944.150172] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 945.682478] ax88179_178a 1-1:1.0 eth1: ax88179 - Link status is: 1 (repeated 2 times)
[ 945.731632] IPv6: ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
[ 946.997214] IPv6: ADDRCONF(NETDEV_UP): eth2: link is not ready (repeated 2 times)
[ 948.997618] IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready
[ 949.010439] ax88179_178a 1-1:1.0 eth1: ax88179 - Link status is: 1
[ 950.425613] IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready
[ 951.680984] IPv6: ADDRCONF(NETDEV_UP): eth2: link is not ready
[ 952.114401] ax88179_178a 1-1:1.0 eth1: ax88179 - Link status is: 1 (repeated 2 times)
[ 952.163568] IPv6: ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
[ 952.229156] IPv6: ADDRCONF(NETDEV_UP): eth2: link is not ready
[ 953.701565] IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready
[ 953.714386] ax88179_178a 1-1:1.0 eth1: ax88179 - Link status is: 1 (repeated 3 times)
[ 955.493509] IPv6: ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
[ 956.465192] eth2: Lucent/Agere firmware doesn't support manual roaming (repeated 5 times)
[ 1099.703614] ax88179_178a 1-1:1.0 eth1: unregister 'ax88179_178a' usb-0000:10:18.0-1, ASIX AX88179 USB 3.0 Gigabit Ethernet
[ 1099.703672] ax88179_178a 1-1:1.0 eth1: Failed to read reg index 0x0002: -19
[ 1099.703687] ax88179_178a 1-1:1.0 eth1: Failed to write reg index 0x0002: -19
[ 1099.725330] ax88179_178a 1-1:1.0 eth1 (unregistered): Failed to write reg index 0x0002: -19
[ 1099.725354] ax88179_178a 1-1:1.0 eth1 (unregistered): Failed to write reg index 0x0001: -19
[ 1099.725367] ax88179_178a 1-1:1.0 eth1 (unregistered): Failed to write reg index 0x0002: -19
[ 1100.650450] ax88179_178a 1-1:1.0 eth1: register 'ax88179_178a' at usb-0000:10:18.0-1, ASIX AX88179 USB 3.0 Gigabit Ethernet, <MAC 'eth1' [IF2]>
[ 1101.213773] IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready
[ 1102.864570] ax88179_178a 1-1:1.0 eth1: ax88179 - Link status is: 1 (repeated 2 times)
[ 1102.913922] IPv6: ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
[ 2300.141473] eth2: Lucent/Agere firmware doesn't support manual roaming (repeated 10 times)
########## wireless info END ############
lista iw | grep -A7 Cifras Cifras Suportadas: * WEP40 (00-0f-ac: 1) * WEP104 (00-0f-ac: 5) * TKIP (00-0f-ac: 2) Antenas disponíveis: TX 0 RX 0 Modos de interface suportados: * IBSS * gerenciado