Realtek sem fio rígido bloqueado

1

Eu tenho o Lenovo G50-30 e eu instalei o Ubuntu 14.04 Gnome LTS e meu wifi está bloqueado, eu posso conectar via ethernet mas nada me ajuda a desbloquear wifi. No BIOS, o Wi-Fi está ativado. Eu tentei rfkill unblock all , mas isso não ajudou aqui é a informação do script que eu encontrei:

########## wireless info START ##########

Report from: 23 Apr 2016 15:13 CEST +0200

Booted last: 23 Apr 2016 14:56 CEST +0200

Script from: 27 Sep 2015 00:34 UTC +0000

##### release ###########################

Distributor ID: Ubuntu
Description:    Ubuntu 14.04.3 LTS
Release:    14.04
Codename:   trusty

##### kernel ############################

Linux 3.19.0-25-generic #26~14.04.1-Ubuntu SMP Fri Jul 24 21:16:20 UTC 2015 x86_64 x86_64 x86_64 GNU/Linux

Parameters: ro, quiet, splash, vt.handoff=7

##### desktop ###########################

sed: can't read /root/.dmrc: No such file or directory

Could not be determined.

##### lspci #############################

02:00.0 Network controller [0280]: Realtek Semiconductor Co., Ltd. RTL8723BE PCIe Wireless Network Adapter [10ec:b723]
    Subsystem: Lenovo Device [17aa:b736]
    Kernel driver in use: rtl8723be

03:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller [10ec:8168] (rev 10)
    Subsystem: Lenovo Device [17aa:3816]
    Kernel driver in use: r8168

##### lsusb #############################

Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 001 Device 006: ID 0bda:b728 Realtek Semiconductor Corp. 
Bus 001 Device 005: ID 0bda:0129 Realtek Semiconductor Corp. RTS5129 Card Reader Controller
Bus 001 Device 004: ID 5986:0652 Acer, Inc 
Bus 001 Device 003: ID 05e3:0608 Genesys Logic, Inc. USB-2.0 4-Port HUB
Bus 001 Device 002: ID 17ef:6053 Lenovo 
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub

##### PCMCIA card info ##################

##### rfkill ############################

0: ideapad_wlan: Wireless LAN
    Soft blocked: yes
    Hard blocked: yes
1: hci0: Bluetooth
    Soft blocked: no
    Hard blocked: no
2: ideapad_bluetooth: Bluetooth
    Soft blocked: no
    Hard blocked: yes
3: phy0: Wireless LAN
    Soft blocked: yes
    Hard blocked: no

##### lsmod #############################

rtl8723be             143360  0 
btcoexist             184320  1 rtl8723be
rtl_pci                40960  1 rtl8723be
rtlwifi               102400  3 btcoexist,rtl_pci,rtl8723be
mac80211              708608  3 rtl_pci,rtlwifi,rtl8723be
cfg80211              524288  2 mac80211,rtlwifi
snd_soc_rt5640         94208  0 
snd_soc_rl6231         16384  1 snd_soc_rt5640
snd_soc_core          196608  2 snd_soc_rt5640,snd_soc_sst_mfld_platform
snd_pcm               106496  8 snd_soc_rt5640,snd_soc_core,snd_hda_codec_hdmi,snd_hda_codec,snd_hda_intel,snd_soc_sst_mfld_platform,snd_hda_controller,snd_pcm_dmaengine
ideapad_laptop         20480  0 
sparse_keymap          16384  1 ideapad_laptop

##### interfaces ########################

auto lo
iface lo inet loopback

##### ifconfig ##########################

eth0      Link encap:Ethernet  HWaddr <MAC 'eth0' [IF]>  
          inet addr:192.168.0.13  Bcast:192.168.0.31  Mask:255.255.255.224
          inet6 addr: fe80::<IP6 'eth0' [IF]>/64 Scope:Link
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:9395 errors:0 dropped:0 overruns:0 frame:0
          TX packets:5583 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000 
          RX bytes:5586646 (5.5 MB)  TX bytes:687926 (687.9 KB)
          Interrupt:89 Base address:0x6000 

wlan0     Link encap:Ethernet  HWaddr <MAC 'wlan0' [IF]>  
          BROADCAST MULTICAST  MTU:1500  Metric:1
          RX packets:0 errors:0 dropped:0 overruns:0 frame:0
          TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000 
          RX bytes:0 (0.0 B)  TX bytes:0 (0.0 B)

##### iwconfig ##########################

eth0      no wireless extensions.

lo        no wireless extensions.

wlan0     IEEE 802.11bgn  ESSID:off/any  
          Mode:Managed  Access Point: Not-Associated   Tx-Power=off   
          Retry short limit:7   RTS thr=2347 B   Fragment thr:off
          Encryption key:off
          Power Management:on


##### route #############################

Kernel IP routing table
Destination     Gateway         Genmask         Flags Metric Ref    Use Iface
0.0.0.0         192.168.0.1     0.0.0.0         UG    0      0        0 eth0
192.168.0.0     0.0.0.0         255.255.255.224 U     1      0        0 eth0

##### resolv.conf #######################

nameserver 127.0.1.1

##### network managers ##################

Installed:

    NetworkManager

Running:

root       824     1  0 14:56 ?        00:00:00 NetworkManager

##### NetworkManager info ###############

NetworkManager Tool

State: connected (global)

- Device: wlan0 ----------------------------------------------------------------
  Type:              802.11 WiFi
  Driver:            rtl8723be
  State:             unavailable
  Default:           no
  HW Address:        <MAC 'wlan0' [IF]>

  Capabilities:

  Wireless Properties
    WEP Encryption:  yes
    WPA Encryption:  yes
    WPA2 Encryption: yes

  Wireless Access Points 

- Device: eth0  [Wired connection 1] -------------------------------------------
  Type:              Wired
  Driver:            r8168
  State:             connected
  Default:           yes
  HW Address:        <MAC 'eth0' [IF]>

  Capabilities:
    Carrier Detect:  yes
    Speed:           1000 Mb/s

  Wired Properties
    Carrier:         on

  IPv4 Settings:
    Address:         192.168.0.13
    Prefix:          27 (255.255.255.224)
    Gateway:         192.168.0.1

    DNS:             89.231.1.206
    DNS:             217.172.224.160

##### NetworkManager.state ##############

[main]
NetworkingEnabled=true
WirelessEnabled=true
WWANEnabled=true
WimaxEnabled=true

##### NetworkManager.conf ###############

[main]
plugins=ifupdown,keyfile,ofono
dns=dnsmasq

[ifupdown]
managed=false

##### NetworkManager profiles ###########

##### iw reg get ########################

Region: Europe/Warsaw (based on set time zone)

country 00:
    (2402 - 2472 @ 40), (3, 20)
    (2457 - 2482 @ 40), (3, 20), PASSIVE-SCAN, NO-IBSS
    (2474 - 2494 @ 20), (3, 20), NO-OFDM, PASSIVE-SCAN, NO-IBSS
    (5170 - 5250 @ 40), (3, 20), PASSIVE-SCAN, NO-IBSS
    (5735 - 5835 @ 40), (3, 20), PASSIVE-SCAN, NO-IBSS

##### iwlist channels ###################

eth0      no frequency information.

lo        no frequency information.

wlan0     13 channels in total; available frequencies :
          Channel 01 : 2.412 GHz
          Channel 02 : 2.417 GHz
          Channel 03 : 2.422 GHz
          Channel 04 : 2.427 GHz
          Channel 05 : 2.432 GHz
          Channel 06 : 2.437 GHz
          Channel 07 : 2.442 GHz
          Channel 08 : 2.447 GHz
          Channel 09 : 2.452 GHz
          Channel 10 : 2.457 GHz
          Channel 11 : 2.462 GHz
          Channel 12 : 2.467 GHz
          Channel 13 : 2.472 GHz

##### iwlist scan #######################

eth0      Interface doesn't support scanning.

wlan0     Interface doesn't support scanning : Network is down

lo        Interface doesn't support scanning.

##### module infos ######################

[rtl8723be]
filename:       /lib/modules/3.19.0-25-generic/kernel/drivers/net/wireless/rtlwifi/rtl8723be/rtl8723be.ko
firmware:       rtlwifi/rtl8723befw.bin
description:    Realtek 8723BE 802.11n PCI wireless
license:        GPL
author:         Realtek WlanFAE <[email protected]>
author:         PageHe  <[email protected]>
srcversion:     00619764255210776FAB54D
depends:        rtlwifi,rtl_pci,btcoexist,mac80211
vermagic:       3.19.0-25-generic SMP mod_unload modversions 
parm:           swlps:bool
parm:           swenc:using hardware crypto (default 0 [hardware])
 (bool)
parm:           ips:using no link power save (default 1 is open)
 (bool)
parm:           fwlps:using linked fw control power save (default 1 is open)
 (bool)
parm:           msi:Set to 1 to use MSI interrupts mode (default 0)
 (bool)
parm:           debug:Set debug level (0-5) (default 0) (int)
parm:           disable_watchdog:Set to 1 to disable the watchdog (default 0)
 (bool)
parm:           ant_sel:Set to 1 or 2 to force antenna number (default 0)
 (int)

[rtl_pci]
filename:       /lib/modules/3.19.0-25-generic/kernel/drivers/net/wireless/rtlwifi/rtl_pci.ko
description:    PCI basic driver for rtlwifi
license:        GPL
author:         Larry Finger    <[email protected]>
author:         Realtek WlanFAE <[email protected]>
author:         lizhaoming  <[email protected]>
srcversion:     8552A7BAFD0FCC2C41CF075
depends:        mac80211,rtlwifi
vermagic:       3.19.0-25-generic SMP mod_unload modversions 

[rtlwifi]
filename:       /lib/modules/3.19.0-25-generic/kernel/drivers/net/wireless/rtlwifi/rtlwifi.ko
description:    Realtek 802.11n PCI wireless core
license:        GPL
author:         Larry Finger    <[email protected]>
author:         Realtek WlanFAE <[email protected]>
author:         lizhaoming  <[email protected]>
srcversion:     990116D31097F1C4C1F7006
depends:        mac80211,cfg80211
vermagic:       3.19.0-25-generic SMP mod_unload modversions 

[mac80211]
filename:       /lib/modules/3.19.0-25-generic/kernel/net/mac80211/mac80211.ko
license:        GPL
description:    IEEE 802.11 subsystem
srcversion:     B23264F074A7D27F8B691A2
depends:        cfg80211
intree:         Y
vermagic:       3.19.0-25-generic SMP mod_unload modversions 
signer:         Magrathea: Glacier signing key
sig_key:        6A:AA:11:D1:8C:2D:3A:40:B1:B4:DB:E5:BF:8A:D6:56:DD:F5:18:38
sig_hashalgo:   sha512
parm:           minstrel_vht_only:Use only VHT rates when VHT is supported by sta. (bool)
parm:           max_nullfunc_tries:Maximum nullfunc tx tries before disconnecting (reason 4). (int)
parm:           max_probe_tries:Maximum probe tries before disconnecting (reason 4). (int)
parm:           beacon_loss_count:Number of beacon intervals before we decide beacon was lost. (int)
parm:           probe_wait_ms:Maximum time(ms) to wait for probe response before disconnecting (reason 4). (int)
parm:           ieee80211_default_rc_algo:Default rate control algorithm for mac80211 to use (charp)

[cfg80211]
filename:       /lib/modules/3.19.0-25-generic/kernel/net/wireless/cfg80211.ko
description:    wireless configuration support
license:        GPL
author:         Johannes Berg
srcversion:     E61EB836E1B33C2A2918485
depends:        
intree:         Y
vermagic:       3.19.0-25-generic SMP mod_unload modversions 
signer:         Magrathea: Glacier signing key
sig_key:        6A:AA:11:D1:8C:2D:3A:40:B1:B4:DB:E5:BF:8A:D6:56:DD:F5:18:38
sig_hashalgo:   sha512
parm:           ieee80211_regdom:IEEE 802.11 regulatory domain code (charp)
parm:           cfg80211_disable_40mhz_24ghz:Disable 40MHz support in the 2.4GHz band (bool)

##### module parameters #################

[rtl8723be]
ant_sel: 0
debug: 1
disable_watchdog: N
fwlps: N
ips: N
msi: N
swenc: N
swlps: N

[mac80211]
beacon_loss_count: 7
ieee80211_default_rc_algo: minstrel_ht
max_nullfunc_tries: 2
max_probe_tries: 5
minstrel_vht_only: Y
probe_wait_ms: 500

[cfg80211]
cfg80211_disable_40mhz_24ghz: N
ieee80211_regdom: 00

##### /etc/modules ######################

lp
rtc
r8168

##### modprobe options ##################

[/etc/modprobe.d/blacklist-ath_pci.conf]
blacklist ath_pci

[/etc/modprobe.d/blacklist.conf]
blacklist evbug
blacklist usbmouse
blacklist usbkbd
blacklist eepro100
blacklist de4x5
blacklist eth1394
blacklist snd_intel8x0m
blacklist snd_aw2
blacklist i2c_i801
blacklist prism54
blacklist bcm43xx
blacklist garmin_gps
blacklist asus_acpi
blacklist snd_pcsp
blacklist pcspkr
blacklist amd76x_edac
blacklist r8169
blacklist wmi

[/etc/modprobe.d/blacklist-rare-network.conf]
alias net-pf-3 off
alias net-pf-6 off
alias net-pf-9 off
alias net-pf-11 off
alias net-pf-12 off
alias net-pf-19 off
alias net-pf-21 off
alias net-pf-36 off

[/etc/modprobe.d/iwlwifi.conf]
remove iwlwifi \
(/sbin/lsmod | grep -o -e ^iwlmvm -e ^iwldvm -e ^iwlwifi | xargs /sbin/rmmod) \
&& /sbin/modprobe -r mac80211

[/etc/modprobe.d/mlx4.conf]
softdep mlx4_core post: mlx4_en

[/etc/modprobe.d/rtl8723be.conf]
options rtl8723be fwlps=N ips=N

##### rc.local ##########################

exit 0

##### pm-utils ##########################

##### udev rules ########################

[/etc/udev/rules.d/70-persistent-net.rules]
# PCI device 0x10ec:0x8168 (r8169)
SUBSYSTEM=="net", ACTION=="add", DRIVERS=="?*", ATTR{address}=="<MAC 'eth0' [IF]>", ATTR{dev_id}=="0x0", ATTR{type}=="1", KERNEL=="eth*", NAME="eth0"
# PCI device 0x10ec:0xb723 (rtl8723be)
SUBSYSTEM=="net", ACTION=="add", DRIVERS=="?*", ATTR{address}=="<MAC 'wlan0' [IF]>", ATTR{dev_id}=="0x0", ATTR{type}=="1", KERNEL=="wlan*", NAME="wlan0"

##### dmesg #############################

[   11.418691] eth0: 0xffffc90004776000, <MAC 'eth0' [IF]>, IRQ 89
[   11.469772] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[   12.117640] Using firmware rtlwifi/rtl8723befw.bin
[   12.117821] rtlwifi: channel plan 0x20
[   12.117824] rtlwifi: country code 11
[   12.129494] ieee80211 phy0: Selected rate control algorithm 'rtl_rc'
[   12.130214] rtlwifi: wireless switch is on
[   15.485070] r8168: eth0: link up
[   15.485132] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready

########## wireless info END ############
    
por Syeth 23.04.2016 / 13:09

0 respostas