ADAPTADOR WIFI: Ralink corp. RT3062 Sem Fio 802.11n 2 T / 2R
iwconfig:
eth0: no wireless extension
lo: no wireless extension
wlan0: IEEE 802.11bgn --- ESSID: off/any
Mode: Managed --- Access Point: Not-Associated -- Tx-Power=20 dBm
Retry --- long limit: 7 --- RTS thr: off --- Fragment thr: off
Power Managment: off
Solicite mais informações, se necessário.
Atualize mais informações:
uname -a
Linux Anonymous 3.8.0-19-generic #30-Ubuntu SMP Wed May 1 16:35:23 UTC 2013 x86_64 x86_64 x86_64 GNU/Linux
dmesg
[ 1.607468] ehci-pci 0000:00:12.2: new USB bus registered, assigned bus number 1
[ 1.607473] ehci-pci 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[ 1.607484] ehci-pci 0000:00:12.2: debug port 1
[ 1.607521] ehci-pci 0000:00:12.2: irq 17, io mem 0xfe02c000
[ 1.618869] ehci-pci 0000:00:12.2: USB 2.0 started, EHCI 1.00
[ 1.618901] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.618903] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.618904] usb usb1: Product: EHCI Host Controller
[ 1.618906] usb usb1: Manufacturer: Linux 3.8.0-19-generic ehci_hcd
[ 1.618907] usb usb1: SerialNumber: 0000:00:12.2
[ 1.618993] hub 1-0:1.0: USB hub found
[ 1.618996] hub 1-0:1.0: 6 ports detected
[ 1.619092] ehci-pci 0000:00:13.2: EHCI Host Controller
[ 1.619097] ehci-pci 0000:00:13.2: new USB bus registered, assigned bus number 2
[ 1.619101] ehci-pci 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[ 1.619112] ehci-pci 0000:00:13.2: debug port 1
[ 1.619144] ehci-pci 0000:00:13.2: irq 19, io mem 0xfe029000
[ 1.630845] ehci-pci 0000:00:13.2: USB 2.0 started, EHCI 1.00
[ 1.630876] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.630877] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.630879] usb usb2: Product: EHCI Host Controller
[ 1.630880] usb usb2: Manufacturer: Linux 3.8.0-19-generic ehci_hcd
[ 1.630881] usb usb2: SerialNumber: 0000:00:13.2
[ 1.630951] hub 2-0:1.0: USB hub found
[ 1.630953] hub 2-0:1.0: 6 ports detected
[ 1.631034] ehci-platform: EHCI generic platform driver
[ 1.631040] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 1.631061] ohci_hcd 0000:00:12.0: OHCI Host Controller
[ 1.631064] ohci_hcd 0000:00:12.0: new USB bus registered, assigned bus number 3
[ 1.631087] ohci_hcd 0000:00:12.0: irq 16, io mem 0xfe02e000
[ 1.690645] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.690647] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.690649] usb usb3: Product: OHCI Host Controller
[ 1.690650] usb usb3: Manufacturer: Linux 3.8.0-19-generic ohci_hcd
[ 1.690651] usb usb3: SerialNumber: 0000:00:12.0
[ 1.690719] hub 3-0:1.0: USB hub found
[ 1.690725] hub 3-0:1.0: 3 ports detected
[ 1.690794] ohci_hcd 0000:00:12.1: OHCI Host Controller
[ 1.690797] ohci_hcd 0000:00:12.1: new USB bus registered, assigned bus number 4
[ 1.690809] ohci_hcd 0000:00:12.1: irq 16, io mem 0xfe02d000
[ 1.750463] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.750465] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.750467] usb usb4: Product: OHCI Host Controller
[ 1.750468] usb usb4: Manufacturer: Linux 3.8.0-19-generic ohci_hcd
[ 1.750469] usb usb4: SerialNumber: 0000:00:12.1
[ 1.750538] hub 4-0:1.0: USB hub found
[ 1.750543] hub 4-0:1.0: 3 ports detected
[ 1.750611] ohci_hcd 0000:00:13.0: OHCI Host Controller
[ 1.750615] ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 5
[ 1.750638] ohci_hcd 0000:00:13.0: irq 18, io mem 0xfe02b000
[ 1.810284] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.810286] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.810287] usb usb5: Product: OHCI Host Controller
[ 1.810289] usb usb5: Manufacturer: Linux 3.8.0-19-generic ohci_hcd
[ 1.810290] usb usb5: SerialNumber: 0000:00:13.0
[ 1.810358] hub 5-0:1.0: USB hub found
[ 1.810363] hub 5-0:1.0: 3 ports detected
[ 1.810434] ohci_hcd 0000:00:13.1: OHCI Host Controller
[ 1.810438] ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus number 6
[ 1.810449] ohci_hcd 0000:00:13.1: irq 18, io mem 0xfe02a000
[ 1.870109] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.870111] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.870112] usb usb6: Product: OHCI Host Controller
[ 1.870114] usb usb6: Manufacturer: Linux 3.8.0-19-generic ohci_hcd
[ 1.870115] usb usb6: SerialNumber: 0000:00:13.1
[ 1.870190] hub 6-0:1.0: USB hub found
[ 1.870195] hub 6-0:1.0: 3 ports detected
[ 1.870264] ohci_hcd 0000:00:14.5: OHCI Host Controller
[ 1.870267] ohci_hcd 0000:00:14.5: new USB bus registered, assigned bus number 7
[ 1.870278] ohci_hcd 0000:00:14.5: irq 18, io mem 0xfe028000
[ 1.929926] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.929930] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.929934] usb usb7: Product: OHCI Host Controller
[ 1.929959] usb usb7: Manufacturer: Linux 3.8.0-19-generic ohci_hcd
[ 1.929961] usb usb7: SerialNumber: 0000:00:14.5
[ 1.930033] hub 7-0:1.0: USB hub found
[ 1.930038] hub 7-0:1.0: 2 ports detected
[ 1.930089] uhci_hcd: USB Universal Host Controller Interface driver
[ 1.930122] xhci_hcd 0000:02:00.0: xHCI Host Controller
[ 1.930125] xhci_hcd 0000:02:00.0: new USB bus registered, assigned bus number 8
[ 1.930227] xhci_hcd 0000:02:00.0: irq 44 for MSI/MSI-X
[ 1.930263] usb usb8: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.930265] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.930266] usb usb8: Product: xHCI Host Controller
[ 1.930267] usb usb8: Manufacturer: Linux 3.8.0-19-generic xhci_hcd
[ 1.930269] usb usb8: SerialNumber: 0000:02:00.0
[ 1.930318] xHCI xhci_add_endpoint called for root hub
[ 1.930320] xHCI xhci_check_bandwidth called for root hub
[ 1.930332] hub 8-0:1.0: USB hub found
[ 1.930337] hub 8-0:1.0: 2 ports detected
[ 1.930379] xhci_hcd 0000:02:00.0: xHCI Host Controller
[ 1.930382] xhci_hcd 0000:02:00.0: new USB bus registered, assigned bus number 9
[ 1.930398] usb usb9: New USB device found, idVendor=1d6b, idProduct=0003
[ 1.930399] usb usb9: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.930401] usb usb9: Product: xHCI Host Controller
[ 1.930402] usb usb9: Manufacturer: Linux 3.8.0-19-generic xhci_hcd
[ 1.930403] usb usb9: SerialNumber: 0000:02:00.0
[ 1.930447] xHCI xhci_add_endpoint called for root hub
[ 1.930448] xHCI xhci_check_bandwidth called for root hub
[ 1.930460] hub 9-0:1.0: USB hub found
[ 1.930464] hub 9-0:1.0: 2 ports detected
[ 1.930577] xhci_hcd 0000:04:00.0: xHCI Host Controller
[ 1.930584] xhci_hcd 0000:04:00.0: new USB bus registered, assigned bus number 10
[ 1.930690] xhci_hcd 0000:04:00.0: irq 45 for MSI/MSI-X
[ 1.930731] usb usb10: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.930733] usb usb10: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.930735] usb usb10: Product: xHCI Host Controller
[ 1.930736] usb usb10: Manufacturer: Linux 3.8.0-19-generic xhci_hcd
[ 1.930738] usb usb10: SerialNumber: 0000:04:00.0
[ 1.930791] xHCI xhci_add_endpoint called for root hub
[ 1.930792] xHCI xhci_check_bandwidth called for root hub
[ 1.930808] hub 10-0:1.0: USB hub found
[ 1.930813] hub 10-0:1.0: 2 ports detected
[ 1.930863] xhci_hcd 0000:04:00.0: xHCI Host Controller
[ 1.930866] xhci_hcd 0000:04:00.0: new USB bus registered, assigned bus number 11
[ 1.930882] usb usb11: New USB device found, idVendor=1d6b, idProduct=0003
[ 1.930884] usb usb11: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.930885] usb usb11: Product: xHCI Host Controller
[ 1.930886] usb usb11: Manufacturer: Linux 3.8.0-19-generic xhci_hcd
[ 1.930888] usb usb11: SerialNumber: 0000:04:00.0
[ 1.930934] xHCI xhci_add_endpoint called for root hub
[ 1.930935] xHCI xhci_check_bandwidth called for root hub
[ 1.930949] hub 11-0:1.0: USB hub found
[ 1.930953] hub 11-0:1.0: 2 ports detected
[ 1.931090] i8042: PNP: No PS/2 controller found. Probing ports directly.
[ 1.963590] i8042: Failed to disable AUX port, but continuing anyway... Is this a SiS?
[ 1.963591] i8042: If AUX port is really absent please use the 'i8042.noaux' option
[ 2.213155] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 2.213245] mousedev: PS/2 mouse device common for all mice
[ 2.213355] rtc_cmos 00:04: RTC can wake from S4
[ 2.213453] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
[ 2.213483] rtc0: alarms up to one month, 242 bytes nvram, hpet irqs
[ 2.213548] device-mapper: uevent: version 1.0.3
[ 2.213599] device-mapper: ioctl: 4.23.1-ioctl (2012-12-18) initialised: [email protected]
[ 2.213638] cpuidle: using governor ladder
[ 2.213694] cpuidle: using governor menu
[ 2.213698] ledtrig-cpu: registered to indicate activity on CPUs
[ 2.213699] EFI Variables Facility v0.08 2004-May-17
[ 2.213864] ashmem: initialized
[ 2.213950] TCP: cubic registered
[ 2.214019] NET: Registered protocol family 10
[ 2.214141] NET: Registered protocol family 17
[ 2.214147] Key type dns_resolver registered
[ 2.214394] Loading module verification certificates
[ 2.215129] MODSIGN: Loaded cert 'Magrathea: Glacier signing key: 4fb521df0b0fa81f775431361b8076d5d0f1869a'
[ 2.215136] registered taskstats version 1
[ 2.217769] Key type trusted registered
[ 2.219501] Key type encrypted registered
[ 2.221299] rtc_cmos 00:04: setting system clock to 2013-10-03 15:35:21 UTC (1380814521)
[ 2.221335] powernow-k8: this CPU is not supported anymore, using acpi-cpufreq instead.
[ 2.222140] acpi-cpufreq: overriding BIOS provided _PSD data
[ 2.222320] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 2.222321] EDD information not available.
[ 2.224333] Freeing unused kernel memory: 992k freed
[ 2.224504] Write protecting the kernel read-only data: 12288k
[ 2.228992] Freeing unused kernel memory: 1176k freed
[ 2.232929] Freeing unused kernel memory: 1080k freed
[ 2.243505] udevd[109]: starting version 175
[ 2.267637] Disabling lock debugging due to kernel taint
[ 2.268090] ahci 0000:00:11.0: version 3.0
[ 2.268385] ahci 0000:00:11.0: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf impl SATA mode
[ 2.268389] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part ccc
[ 2.268729] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 2.268945] r8169 0000:03:00.0: irq 46 for MSI/MSI-X
[ 2.268959] wmi: Mapper loaded
[ 2.269531] scsi0 : ahci
[ 2.269651] scsi1 : ahci
[ 2.270660] r8169 0000:03:00.0 eth0: RTL8168evl/8111evl at 0xffffc90001872000, 90:2b:34:99:02:f3, XID 0c900800 IRQ 46
[ 2.270663] r8169 0000:03:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
[ 2.271131] scsi2 : ahci
[ 2.271256] scsi3 : ahci
[ 2.271294] ata1: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f100 irq 22
[ 2.271298] ata2: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f180 irq 22
[ 2.271300] ata3: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f200 irq 22
[ 2.271303] ata4: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f280 irq 22
[ 2.279556] [drm] Initialized drm 1.1.0 20060810
[ 2.281031] scsi4 : pata_atiixp
[ 2.287482] scsi5 : pata_atiixp
[ 2.287825] ata5: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xfa00 irq 14
[ 2.287827] ata6: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xfa08 irq 15
[ 2.299045] [drm] VGACON disable radeon kernel modesetting.
[ 2.299581] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[ 2.299583] [drm] No driver support for vblank timestamp query.
[ 2.299585] [drm] Initialized radeon 1.33.0 20080528 for 0000:01:00.0 on minor 0
[ 2.465133] ata6.00: ATA-8: WDC WD10EADX-00TDHB0, 77.04D77, max UDMA/133
[ 2.465136] ata6.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 2.465154] ata6.01: ATAPI: TSSTcorp CDDVDW SH-222BB, SB00, max UDMA/100
[ 2.481165] ata6.00: configured for UDMA/100
[ 2.496663] ata6.01: configured for UDMA/100
[ 2.552143] tsc: Refined TSC clocksource calibration: 4218.660 MHz
[ 2.552154] Switching to clocksource tsc
[ 2.560109] usb 2-4: new high-speed USB device number 3 using ehci-pci
[ 2.588037] ata1: SATA link down (SStatus 0 SControl 300)
[ 2.588081] ata2: SATA link down (SStatus 0 SControl 300)
[ 2.592023] ata3: SATA link down (SStatus 0 SControl 300)
[ 2.592070] ata4: SATA link down (SStatus 0 SControl 300)
[ 2.592305] scsi 5:0:0:0: Direct-Access ATA WDC WD10EADX-00T 77.0 PQ: 0 ANSI: 5
[ 2.592413] sd 5:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
[ 2.592457] sd 5:0:0:0: Attached scsi generic sg0 type 0
[ 2.592475] sd 5:0:0:0: [sda] Write Protect is off
[ 2.592478] sd 5:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 2.592509] sd 5:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.595006] scsi 5:0:1:0: CD-ROM TSSTcorp CDDVDW SH-222BB SB00 PQ: 0 ANSI: 5
[ 2.623589] sr0: scsi3-mmc drive: 16x/16x writer dvd-ram cd/rw xa/form2 cdda tray
[ 2.623595] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 2.623784] sr 5:0:1:0: Attached scsi CD-ROM sr0
[ 2.623847] sr 5:0:1:0: Attached scsi generic sg1 type 5
[ 2.631839] sda: sda1 sda2 < sda5 >
[ 2.634092] sd 5:0:0:0: [sda] Attached SCSI disk
[ 2.692705] usb 2-4: New USB device found, idVendor=0781, idProduct=5567
[ 2.692708] usb 2-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 2.692710] usb 2-4: Product: Cruzer Blade
[ 2.692711] usb 2-4: Manufacturer: SanDisk
[ 2.692712] usb 2-4: SerialNumber: 20051739220C80C0562B
[ 2.694391] Initializing USB Mass Storage driver...
[ 2.694517] scsi6 : usb-storage 2-4:1.0
[ 2.694564] usbcore: registered new interface driver usb-storage
[ 2.694566] USB Mass Storage support registered.
[ 2.954916] usb 5-3: new low-speed USB device number 2 using ohci_hcd
[ 3.131394] usb 5-3: New USB device found, idVendor=1c4f, idProduct=0002
[ 3.131401] usb 5-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 3.131406] usb 5-3: Product: USB Keykoard
[ 3.131410] usb 5-3: Manufacturer: USB
[ 3.147361] usbcore: registered new interface driver usbhid
[ 3.147364] usbhid: USB HID core driver
[ 3.149515] input: USB USB Keykoard as /devices/pci0000:00/0000:00:13.0/usb5/5-3/5-3:1.0/input/input2
[ 3.149872] hid-generic 0003:1C4F:0002.0001: input,hidraw0: USB HID v1.10 Keyboard [USB USB Keykoard] on usb-0000:00:13.0-3/input0
[ 3.150031] input: USB USB Keykoard as /devices/pci0000:00/0000:00:13.0/usb5/5-3/5-3:1.1/input/input3
[ 3.150095] hid-generic 0003:1C4F:0002.0002: input,hidraw1: USB HID v1.10 Device [USB USB Keykoard] on usb-0000:00:13.0-3/input1
[ 3.265976] usb 3-2: new low-speed USB device number 2 using ohci_hcd
[ 3.430487] usb 3-2: New USB device found, idVendor=093a, idProduct=2521
[ 3.430495] usb 3-2: New USB device strings: Mfr=0, Product=2, SerialNumber=0
[ 3.430500] usb 3-2: Product: USB OPTICAL MOUSE
[ 3.440743] input: USB OPTICAL MOUSE as /devices/pci0000:00/0000:00:12.0/usb3/3-2/3-2:1.0/input/input4
[ 3.440839] hid-generic 0003:093A:2521.0003: input,hidraw2: USB HID v1.11 Mouse [USB OPTICAL MOUSE] on usb-0000:00:12.0-2/input0
[ 3.689354] scsi 6:0:0:0: Direct-Access SanDisk Cruzer Blade 1.26 PQ: 0 ANSI: 5
[ 3.689826] sd 6:0:0:0: Attached scsi generic sg2 type 0
[ 3.691091] sd 6:0:0:0: [sdb] 7821312 512-byte logical blocks: (4.00 GB/3.72 GiB)
[ 3.692165] sd 6:0:0:0: [sdb] Write Protect is off
[ 3.692169] sd 6:0:0:0: [sdb] Mode Sense: 43 00 00 00
[ 3.693092] sd 6:0:0:0: [sdb] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
[ 3.697979] sdb: sdb1
[ 3.700578] usb 3-3: new full-speed USB device number 3 using ohci_hcd
[ 3.701453] sd 6:0:0:0: [sdb] Attached SCSI removable disk
[ 3.873058] usb 3-3: New USB device found, idVendor=046d, idProduct=c52e
[ 3.873060] usb 3-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 3.873061] usb 3-3: Product: USB Receiver
[ 3.873061] usb 3-3: Manufacturer: Logitech
[ 3.881196] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:12.0/usb3/3-3/3-3:1.0/input/input5
[ 3.881270] hid-generic 0003:046D:C52E.0004: input,hidraw3: USB HID v1.11 Keyboard [Logitech USB Receiver] on usb-0000:00:12.0-3/input0
[ 3.886310] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:12.0/usb3/3-3/3-3:1.1/input/input6
[ 3.886531] hid-generic 0003:046D:C52E.0005: input,hiddev0,hidraw4: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:12.0-3/input1
[ 16.349513] bio: create slab <bio-1> at 1
[ 16.514292] bio: create slab <bio-1> at 1
[ 22.566523] EXT4-fs (dm-1): INFO: recovery required on readonly filesystem
[ 22.566526] EXT4-fs (dm-1): write access will be enabled during recovery
[ 23.641340] EXT4-fs (dm-1): orphan cleanup on readonly fs
[ 23.641346] EXT4-fs (dm-1): ext4_orphan_cleanup: deleting unreferenced inode 44564502
[ 23.641368] EXT4-fs (dm-1): ext4_orphan_cleanup: deleting unreferenced inode 44564501
[ 23.641374] EXT4-fs (dm-1): ext4_orphan_cleanup: deleting unreferenced inode 44564500
[ 23.641380] EXT4-fs (dm-1): ext4_orphan_cleanup: deleting unreferenced inode 40109593
[ 23.641409] EXT4-fs (dm-1): ext4_orphan_cleanup: deleting unreferenced inode 44564499
[ 23.641415] EXT4-fs (dm-1): ext4_orphan_cleanup: deleting unreferenced inode 44564498
[ 23.641421] EXT4-fs (dm-1): ext4_orphan_cleanup: deleting unreferenced inode 2621752
[ 23.641458] EXT4-fs (dm-1): ext4_orphan_cleanup: deleting unreferenced inode 2621651
[ 23.641468] EXT4-fs (dm-1): ext4_orphan_cleanup: deleting unreferenced inode 44564497
[ 23.641479] EXT4-fs (dm-1): ext4_orphan_cleanup: deleting unreferenced inode 44564496
[ 23.641490] EXT4-fs (dm-1): ext4_orphan_cleanup: deleting unreferenced inode 44564495
[ 23.641500] EXT4-fs (dm-1): ext4_orphan_cleanup: deleting unreferenced inode 44564494
[ 23.641515] EXT4-fs (dm-1): ext4_orphan_cleanup: deleting unreferenced inode 44564493
[ 23.641525] EXT4-fs (dm-1): ext4_orphan_cleanup: deleting unreferenced inode 2621640
[ 23.641535] EXT4-fs (dm-1): 14 orphan inodes deleted
[ 23.641536] EXT4-fs (dm-1): recovery complete
[ 23.773271] EXT4-fs (dm-1): mounted filesystem with ordered data mode. Opts: (null)
[ 26.714729] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 27.014172] udevd[504]: starting version 175
[ 27.343988] EXT4-fs (dm-1): re-mounted. Opts: errors=remount-ro
[ 28.564859] lp: driver loaded but no devices found
[ 29.267383] parport_pc 00:08: reported by Plug and Play ACPI
[ 29.267435] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
[ 29.363116] lp0: using parport0 (interrupt-driven).
[ 29.425148] ppdev: user-space parallel port driver
[ 29.426077] MCE: In-kernel MCE decoding enabled.
[ 29.504277] EDAC MC: Ver: 3.0.0
[ 29.590044] AMD64 EDAC driver v3.4.0
[ 29.590065] EDAC amd64: DRAM ECC disabled.
[ 29.590071] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
[ 29.590071] Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
[ 29.590071] (Note that use of the override may cause unknown side effects.)
[ 29.596682] ACPI Warning: 0x0000000000000b00-0x0000000000000b07 SystemIO conflicts with Region \SOR1 1 (20121018/utaddress-251)
[ 29.596687] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 29.612131] microcode: CPU0: patch_level=0x06000626
[ 29.701156] sp5100_tco: SP5100/SB800 TCO WatchDog Timer Driver v0.05
[ 29.701195] sp5100_tco: PCI Revision ID: 0x3c
[ 29.701211] sp5100_tco: failed to find MMIO address, giving up.
[ 30.001882] microcode: CPU0: new patch_level=0x06000629
[ 30.001892] microcode: CPU1: patch_level=0x06000626
[ 30.001900] microcode: CPU2: patch_level=0x06000626
[ 30.012295] microcode: CPU2: new patch_level=0x06000629
[ 30.012304] microcode: CPU3: patch_level=0x06000626
[ 30.012601] microcode: Microcode Update Driver: v2.00 <[email protected]>, Peter Oruba
[ 31.853776] kvm: disabled by bios
[ 31.855990] kvm: disabled by bios
[ 31.860270] kvm: disabled by bios
[ 31.863998] kvm: disabled by bios
[ 31.976456] cfg80211: Calling CRDA to update world regulatory domain
[ 32.469245] input: HDA ATI SB Line as /devices/pci0000:00/0000:00:14.2/sound/card0/input7
[ 32.469319] input: HDA ATI SB Front Mic as /devices/pci0000:00/0000:00:14.2/sound/card0/input8
[ 32.469379] input: HDA ATI SB Rear Mic as /devices/pci0000:00/0000:00:14.2/sound/card0/input9
[ 32.469438] input: HDA ATI SB Front Headphone as /devices/pci0000:00/0000:00:14.2/sound/card0/input10
[ 32.469496] input: HDA ATI SB Line Out as /devices/pci0000:00/0000:00:14.2/sound/card0/input11
[ 32.469779] hda-intel 0000:01:00.1: Handle VGA-switcheroo audio client
[ 32.469838] snd_hda_intel 0000:01:00.1: irq 47 for MSI/MSI-X
[ 32.572904] input: HD-Audio Generic HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input12
[ 33.004984] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[ 33.712398] EXT2-fs (sda1): warning: mounting unchecked fs, running e2fsck is recommended
[ 33.736739] cfg80211: World regulatory domain updated:
[ 33.736741] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 33.736743] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 33.736744] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 33.736746] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 33.736747] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 33.736748] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 34.113263] type=1400 audit(1380814553.485:2): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=886 comm="apparmor_parser"
[ 34.113313] type=1400 audit(1380814553.485:3): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=1023 comm="apparmor_parser"
[ 34.113321] type=1400 audit(1380814553.485:4): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=905 comm="apparmor_parser"
[ 34.113712] type=1400 audit(1380814553.485:5): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=886 comm="apparmor_parser"
[ 34.113760] type=1400 audit(1380814553.485:6): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=1023 comm="apparmor_parser"
[ 34.113767] type=1400 audit(1380814553.485:7): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=905 comm="apparmor_parser"
[ 34.113952] type=1400 audit(1380814553.485:8): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=886 comm="apparmor_parser"
[ 34.114011] type=1400 audit(1380814553.485:9): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=1023 comm="apparmor_parser"
[ 34.114017] type=1400 audit(1380814553.485:10): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=905 comm="apparmor_parser"
[ 35.349305] init: failsafe main process (1060) killed by TERM signal
[ 36.283172] type=1400 audit(1380814555.661:11): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=1148 comm="apparmor_parser"
[ 37.461643] Bluetooth: Core ver 2.16
[ 37.461658] NET: Registered protocol family 31
[ 37.461660] Bluetooth: HCI device and connection manager initialized
[ 37.461666] Bluetooth: HCI socket layer initialized
[ 37.461668] Bluetooth: L2CAP socket layer initialized
[ 37.461673] Bluetooth: SCO socket layer initialized
[ 37.566494] Bluetooth: RFCOMM TTY layer initialized
[ 37.566502] Bluetooth: RFCOMM socket layer initialized
[ 37.566503] Bluetooth: RFCOMM ver 1.11
[ 37.744700] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 37.744703] Bluetooth: BNEP filters: protocol multicast
[ 37.744710] Bluetooth: BNEP socket layer initialized
[ 38.350122] init: avahi-cups-reload main process (1271) terminated with status 1
[ 38.619045] vboxdrv: Found 4 processor cores.
[ 38.619274] vboxdrv: fAsync=0 offMin=0x60b offMax=0x4018
[ 38.619748] vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'.
[ 38.619750] vboxdrv: Successfully loaded version 4.2.10_Ubuntu (interface 0x001a0004).
[ 38.982517] vboxpci: IOMMU not found (not registered)
[ 41.236237] init: udev-fallback-graphics main process (1518) terminated with status 1
[ 42.158520] r8169 0000:03:00.0 eth0: link down
[ 42.158555] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 42.158604] r8169 0000:03:00.0 eth0: link down
[ 42.158803] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 42.292268] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 42.292463] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 42.850789] Adding 16756732k swap on /dev/mapper/cryptswap1. Priority:-1 extents:1 across:16756732k
[ 43.657550] r8169 0000:03:00.0 eth0: link up
[ 43.657557] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 76.699326] ISO 9660 Extensions: Microsoft Joliet Level 3
[ 76.895853] ISOFS: changing to secondary root
[ 121.622347] r8169 0000:03:00.0 eth0: link down
[ 126.439702] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 126.570751] r8169 0000:03:00.0 eth0: link up
[ 126.570760] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 276.381016] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 280.173733] wlan0: authenticate with 00:26:4d:6f:b6:90
[ 280.221303] wlan0: send auth to 00:26:4d:6f:b6:90 (try 1/3)
[ 280.229562] wlan0: authenticated
[ 280.229708] rt2800pci 0000:05:06.0 wlan0: disabling HT as WMM/QoS is not supported by the AP
[ 280.229722] rt2800pci 0000:05:06.0 wlan0: disabling VHT as WMM/QoS is not supported by the AP
[ 280.233187] wlan0: associate with 00:26:4d:6f:b6:90 (try 1/3)
[ 280.260115] wlan0: RX AssocResp from 00:26:4d:6f:b6:90 (capab=0x401 status=0 aid=2)
[ 280.260310] wlan0: associated
[ 280.260341] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 280.260424] cfg80211: Calling CRDA for country: DE
[ 280.263538] cfg80211: Regulatory domain changed to country: DE
[ 280.263540] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 280.263542] cfg80211: (2400000 KHz - 2483500 KHz @ 40000 KHz), (N/A, 2000 mBm)
[ 280.263543] cfg80211: (5150000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[ 280.263544] cfg80211: (5250000 KHz - 5350000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[ 280.263546] cfg80211: (5470000 KHz - 5725000 KHz @ 40000 KHz), (N/A, 2698 mBm)
Observação: a rede com a qual estou tentando se conectar é uma rede insegura