Esse erro é exibido porque você executou "vdpauinfo" com "sudo". Tente novamente com "vdpauinfo" sem "sudo".
Novo para esta comunidade. Espero que alguém possa me ajudar com o abaixo. Estou no ponto em que preciso que o vdpau funcione para descarregar a CPU. Sem sorte.
Na semana passada, minha nova placa nvidia GT610 chegou - eu tinha uma esperança tão pequena que meu GT220 atual tinha uma falha - instalei, e ainda não consigo fazer o vdpau funcionar. Assim, o GT220 está de volta à sua posição.
O que quero dizer é que depois de instalar o vdpauinfo o comando: ~$ vdpauinfo dá:
display: :0.0
screen: 0 Error creating VDPAU device: 1
A placa-mãe é uma Gigabyte H55M-UD2H com controlador de vídeo on-board e conector HDMI que eu desabilitei na BIOS usando a configuração PEG. (de acordo com o BIOS isso significaria que ele selecionaria um cartão externo sobre o onboard). Eu instalei o Ubuntu 13.04 desde que eu tinha que em DVD, e baixei e apliquei todas as atualizações que vieram através. Verificando o driver de vídeo indicou nouveau - que é "como esperado". Após o pedido para mudar para 13.10 eu fiz isso. Em seguida, usei a opção "configurações" canto superior direito para instalar os drivers nvidia - Eu acredito que eu escolhi o top que deve incluir o capability VDPAU. Depois disso terminado eu parei o X-server, abri uma sessão de terminal e gerou um novo arquivo Xconf e então tentei iniciar o X-server novamente. Isso falhou e exigiu uma reinicialização difícil. A máquina veio de volta. Eu instalei o vdpauinfo usando o apt-get. Então eu executei "vdpauinfo" com o resultado como listado acima.Erro criando dispositivo VDPAU: 1 " Eu tentei isso várias vezes ao longo dos últimos lançamentos, provavelmente já em 10.10, e nunca funcionou. Eu vasculhei as páginas da web e segui pistas e conselhos sem sucesso, esta é a última peça do quebra-cabeça para ter o meu mediacentre baseado no Ubuntu que funciona como um sonho a parte disso.
Qualquer ajuda para resolver isso ou chegar ao ponto por que isso não funciona para mim é muito apreciado.
snippet da saída sudo lshw:
test-iv-medcntr
description: Desktop Computer
product: H55M-UD2H ()
vendor: Gigabyte Technology Co., Ltd.
width: 64 bits
capabilities: smbios-2.4 dmi-2.4 vsyscall32
configuration: boot=normal chassis=desktop uuid=00000000-0000-0000-0000-1C6F65825E1D
*-core
description: Motherboard
product: H55M-UD2H
vendor: Gigabyte Technology Co., Ltd.
physical id: 0
version: x.x
*-firmware
description: BIOS
vendor: Award Software International, Inc.
physical id: 0
version: F11
date: 08/20/2010
size: 128KiB
capacity: 8128KiB
capabilities: pci pnp upgrade shadowing cdboot bootselect edd int13floppy360 int13floppy1200 int13floppy720 int13floppy2880 int5printscreen int9keyboard int14serial int17printer int10video acpi usb ls120boot zipboot biosbootspecification
*-cpu
description: CPU
product: Intel(R) Pentium(R) CPU G6950 @ 2.80GHz
vendor: Intel Corp.
physical id: 4
bus info: cpu@0
version: Intel(R) Pentium(R) CPU
slot: Socket 1156
size: 1197MHz
capacity: 4GHz
width: 64 bits
clock: 133MHz
capabilities: fpu fpu_exception wp vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx rdtscp x86-64 constant_tsc arch_perfmon pebs bts rep_good nopl xtopology nonstop_tsc aperfmperf pni dtes64 monitor ds_cpl vmx est tm2 ssse3 cx16 xtpr pdcm popcnt lahf_lm arat dtherm tpr_shadow vnmi flexpriority ept vpid cpufreq
*-cache:0
***[data removed]***
*-cache:1
***[data removed]***
*-memory
***[data removed]***
*-bank:0
***[data removed]***
*-bank:1
***[data removed]***
*-bank:2
***[data removed]***
*-bank:3
***[data removed]***
*-pci:0
description: Host bridge
product: Core Processor DRAM Controller
vendor: Intel Corporation
physical id: 100
bus info: pci@0000:00:00.0
version: 12
width: 32 bits
clock: 33MHz
*-pci:0
description: PCI bridge
product: Core Processor PCI Express x16 Root Port
vendor: Intel Corporation
physical id: 1
bus info: pci@0000:00:01.0
version: 12
width: 32 bits
clock: 33MHz
capabilities: pci pm msi pciexpress normal_decode bus_master cap_list
configuration: driver=pcieport
resources: irq:40 ioport:b000(size=4096) memory:f9000000-faffffff ioport:d0000000(size=536870912)
*-display
description: VGA compatible controller
product: GT216 [GeForce GT 220]
vendor: NVIDIA Corporation
physical id: 0
bus info: pci@0000:01:00.0
version: a2
width: 64 bits
clock: 33MHz
capabilities: pm msi pciexpress vga_controller bus_master cap_list rom
configuration: driver=nvidia latency=0
resources: irq:16 memory:f9000000-f9ffffff memory:d0000000-dfffffff memory:ee000000-efffffff ioport:bf00(size=128) memory:e0000000-e007ffff
*-multimedia
description: Audio device
product: High Definition Audio Controller
vendor: NVIDIA Corporation
physical id: 0.1
bus info: pci@0000:01:00.1
version: a1
width: 32 bits
clock: 33MHz
capabilities: pm msi pciexpress bus_master cap_list
configuration: driver=snd_hda_intel latency=0
resources: irq:16 memory:faffc000-faffffff
***[data removed]***
Para completar, também incluo trechos do "Xorg.0.log"
trechos de Xorg.0.log
[ 16.220]
X.Org X Server 1.14.5
Release Date: 2013-12-12
[ 16.220] X Protocol Version 11, Revision 0
[ 16.220] Build Operating System: Linux 3.2.0-37-generic x86_64 Ubuntu
[ 16.220] Current Operating System: Linux TEST-IV-MEDCNTR 3.11.0-15-generic #25-Ubuntu SMP Thu Jan 30 17:22:01 UTC 2014 x86_64
[ 16.220] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.11.0-15-generic root=UUID=32995062-eaef-4392-a77a-3fcf80fa543c ro quiet splash
[ 16.220] Build Date: 17 December 2013 10:06:15AM
[ 16.220] xorg-server 2:1.14.5-1ubuntu2~saucy1 (For technical support please see http://www.ubuntu.com/support)
[ 16.220] Current version of pixman: 0.30.2
[ 16.220] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 16.220] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 16.220] (==) Log file: "/var/log/Xorg.0.log", Time: Sun Feb 9 13:27:51 2014
[ 16.220] (==) Using config file: "/etc/X11/xorg.conf"
[ 16.220] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 16.241] (==) ServerLayout "Layout0"
[ 16.241] (**) |-->Screen "Screen0" (0)
[ 16.241] (**) | |-->Monitor "Monitor0"
[ 16.241] (**) | |-->Device "Device0"
[ 16.241] (**) |-->Input Device "Keyboard0"
[ 16.241] (**) |-->Input Device "Mouse0"
[ 16.241] (==) Automatically adding devices
[ 16.241] (==) Automatically enabling devices
[ 16.241] (==) Automatically adding GPU devices
[ 16.241] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
[ 16.241] Entry deleted from font path.
[ 16.241] (WW) The directory "/usr/share/fonts/X11/100dpi/" does not exist.
[ 16.241] Entry deleted from font path.
[ 16.241] (WW) The directory "/usr/share/fonts/X11/75dpi/" does not exist.
[ 16.241] Entry deleted from font path.
[ 16.241] (WW) The directory "/usr/share/fonts/X11/100dpi" does not exist.
[ 16.241] Entry deleted from font path.
[ 16.241] (WW) The directory "/usr/share/fonts/X11/75dpi" does not exist.
[ 16.241] Entry deleted from font path.
[ 16.241] (==) FontPath set to:
/usr/share/fonts/X11/misc,
/usr/share/fonts/X11/Type1,
built-ins
[ 16.241] (==) ModulePath set to "/usr/lib/x86_64-linux-gnu/xorg/extra-modules,/usr/lib/xorg/extra-modules,/usr/lib/xorg/modules"
[ 16.241] (WW) Hotplugging is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled.
[ 16.241] (WW) Disabling Keyboard0
[ 16.241] (WW) Disabling Mouse0
[ 16.241] (II) Loader magic: 0x7f131dcd7d20
[ 16.241] (II) Module ABI versions:
[ 16.241] X.Org ANSI C Emulation: 0.4
[ 16.241] X.Org Video Driver: 14.1
[ 16.241] X.Org XInput driver : 19.1
[ 16.241] X.Org Server Extension : 7.0
[ 16.243] (--) PCI:*(0:1:0:0) 10de:0a20:0000:0000 rev 162, Mem @ 0xf9000000/16777216, 0xd0000000/268435456, 0xee000000/33554432, I/O @ 0x0000bf00/128, BIOS @ 0x????????/524288
[ 16.243] (II) Open ACPI successful (/var/run/acpid.socket)
[ 16.243] Initializing built-in extension Generic Event Extension
[ 16.243] Initializing built-in extension SHAPE
[ 16.243] Initializing built-in extension MIT-SHM
[ 16.243] Initializing built-in extension XInputExtension
[ 16.243] Initializing built-in extension XTEST
[ 16.243] Initializing built-in extension BIG-REQUESTS
[ 16.243] Initializing built-in extension SYNC
[ 16.243] Initializing built-in extension XKEYBOARD
[ 16.243] Initializing built-in extension XC-MISC
[ 16.243] Initializing built-in extension SECURITY
[ 16.243] Initializing built-in extension XINERAMA
[ 16.243] Initializing built-in extension XFIXES
[ 16.243] Initializing built-in extension RENDER
[ 16.243] Initializing built-in extension RANDR
[ 16.243] Initializing built-in extension COMPOSITE
[ 16.243] Initializing built-in extension DAMAGE
[ 16.243] Initializing built-in extension MIT-SCREEN-SAVER
[ 16.243] Initializing built-in extension DOUBLE-BUFFER
[ 16.243] Initializing built-in extension RECORD
[ 16.243] Initializing built-in extension DPMS
[ 16.243] Initializing built-in extension X-Resource
[ 16.243] Initializing built-in extension XVideo
[ 16.243] Initializing built-in extension XVideo-MotionCompensation
[ 16.243] Initializing built-in extension SELinux
[ 16.243] Initializing built-in extension XFree86-VidModeExtension
[ 16.243] Initializing built-in extension XFree86-DGA
[ 16.243] Initializing built-in extension XFree86-DRI
[ 16.243] Initializing built-in extension DRI2
[ 16.243] (II) "glx" will be loaded by default.
[ 16.243] (WW) "xmir" is not to be loaded by default. Skipping.
[ 16.243] (II) LoadModule: "dri2"
[ 16.243] (II) Module "dri2" already built-in
[ 16.243] (II) LoadModule: "glamoregl"
[ 16.275] (II) Loading /usr/lib/xorg/modules/libglamoregl.so
[ 17.365] (II) Module glamoregl: vendor="X.Org Foundation"
[ 17.365] compiled for 1.14.3, module version = 0.5.1
[ 17.365] ABI class: X.Org ANSI C Emulation, version 0.4
[ 17.365] (II) LoadModule: "glx"
[ 17.365] (II) Loading /usr/lib/x86_64-linux-gnu/xorg/extra-modules/libglx.so
[ 17.487] (II) Module glx: vendor="NVIDIA Corporation"
[ 17.487] compiled for 4.0.2, module version = 1.0.0
[ 17.487] Module class: X.Org Server Extension
[ 17.487] (II) NVIDIA GLX Module 304.88 Wed Mar 27 14:46:57 PDT 2013
[ 17.487] Loading extension GLX
[ 17.487] (II) LoadModule: "nvidia"
[ 17.487] (II) Loading /usr/lib/x86_64-linux-gnu/xorg/extra-modules/nvidia_drv.so
[ 17.558] (II) Module nvidia: vendor="NVIDIA Corporation"
[ 17.558] compiled for 4.0.2, module version = 1.0.0
[ 17.558] Module class: X.Org Video Driver
[ 17.565] (II) NVIDIA dlloader X Driver 304.88 Wed Mar 27 14:28:14 PDT 2013
[ 17.565] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
[ 17.571] (++) using VT number 7
[ 17.573] (II) Loading sub module "fb"
[ 17.573] (II) LoadModule: "fb"
[ 17.579] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 17.580] (II) Module fb: vendor="X.Org Foundation"
[ 17.580] compiled for 1.14.5, module version = 1.0.0
[ 17.580] ABI class: X.Org ANSI C Emulation, version 0.4
[ 17.580] (II) Loading sub module "wfb"
[ 17.580] (II) LoadModule: "wfb"
[ 17.580] (II) Loading /usr/lib/xorg/modules/libwfb.so
[ 17.588] (II) Module wfb: vendor="X.Org Foundation"
[ 17.588] compiled for 1.14.5, module version = 1.0.0
[ 17.588] ABI class: X.Org ANSI C Emulation, version 0.4
[ 17.588] (II) Loading sub module "ramdac"
[ 17.588] (II) LoadModule: "ramdac"
[ 17.588] (II) Module "ramdac" already built-in
[ 17.598] (**) NVIDIA(0): Depth 24, (--) framebuffer bpp 32
[ 17.598] (==) NVIDIA(0): RGB weight 888
[ 17.598] (==) NVIDIA(0): Default visual is TrueColor
[ 17.598] (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
[ 17.598] (**) NVIDIA(0): Enabling 2D acceleration
[ 18.544] (II) NVIDIA(GPU-0): Display (SAMSUNG (DFP-1)) does not support NVIDIA 3D Vision
[ 18.544] (II) NVIDIA(GPU-0): stereo.
[ 18.546] (II) NVIDIA(0): NVIDIA GPU GeForce GT 220 (GT216) at PCI:1:0:0 (GPU-0)
[ 18.546] (--) NVIDIA(0): Memory: 1048576 kBytes
[ 18.546] (--) NVIDIA(0): VideoBIOS: 70.16.27.00.02
[ 18.546] (II) NVIDIA(0): Detected PCI Express Link width: 16X
[ 18.546] (--) NVIDIA(0): Interlaced video modes are supported on this GPU
[ 18.548] (--) NVIDIA(0): Valid display device(s) on GeForce GT 220 at PCI:1:0:0
[ 18.548] (--) NVIDIA(0): CRT-0
[ 18.548] (--) NVIDIA(0): CRT-1
[ 18.548] (--) NVIDIA(0): DFP-0
[ 18.548] (--) NVIDIA(0): SAMSUNG (DFP-1) (connected)
[ 18.548] (--) NVIDIA(0): CRT-0: 400.0 MHz maximum pixel clock
[ 18.548] (--) NVIDIA(0): CRT-1: 400.0 MHz maximum pixel clock
[ 18.548] (--) NVIDIA(0): DFP-0: 330.0 MHz maximum pixel clock
[ 18.548] (--) NVIDIA(0): DFP-0: Internal Single Link TMDS
[ 18.548] (--) NVIDIA(0): SAMSUNG (DFP-1): 165.0 MHz maximum pixel clock
[ 18.548] (--) NVIDIA(0): SAMSUNG (DFP-1): Internal Single Link TMDS
[ 18.548] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[ 18.548] (**) NVIDIA(0): device SAMSUNG (DFP-1) (Using EDID frequencies has been
[ 18.548] (**) NVIDIA(0): enabled on all display devices.)
[ 18.555] (==) NVIDIA(0):
[ 18.555] (==) NVIDIA(0): No modes were requested; the default mode "nvidia-auto-select"
[ 18.555] (==) NVIDIA(0): will be used as the requested mode.
[ 18.555] (==) NVIDIA(0):
[ 18.555] (II) NVIDIA(0): Validated MetaModes:
[ 18.555] (II) NVIDIA(0): "DFP-1:nvidia-auto-select"
[ 18.555] (II) NVIDIA(0): Virtual screen size determined to be 1920 x 1080
[ 18.581] (--) NVIDIA(0): DPI set to (304, 304); computed from "UseEdidDpi" X config
[ 18.581] (--) NVIDIA(0): option
[ 18.581] (--) Depth 24 pixmap format is 32 bpp
[ 18.581] (II) NVIDIA: Using 768.00 MB of virtual memory for indirect memory access.
[ 18.585] (II) NVIDIA(0): Setting mode "DFP-1:nvidia-auto-select"
[ 18.622] Loading extension NV-GLX
[ 18.650] (==) NVIDIA(0): Disabling shared memory pixmaps
[ 18.650] (==) NVIDIA(0): Backing store disabled
[ 18.650] (==) NVIDIA(0): Silken mouse enabled
[ 18.651] (**) NVIDIA(0): DPMS enabled
[ 18.660] Loading extension NV-CONTROL
[ 18.660] Loading extension XINERAMA
[ 18.660] (II) Loading sub module "dri2"
[ 18.660] (II) LoadModule: "dri2"
[ 18.660] (II) Module "dri2" already built-in
[ 18.660] (II) NVIDIA(0): [DRI2] Setup complete
[ 18.660] (II) NVIDIA(0): [DRI2] VDPAU driver: nvidia
[ 18.660] (--) RandR disabled
[ 18.664] (II) SELinux: Disabled on system
[ 18.664] (II) Initializing extension GLX
[ 18.696] (II) XKB: reuse xkmfile /var/lib/xkb/server-B20D7FC79C7F597315E3E501AEF10E0D866E8E92.xkm
***[data removed]***
[ 18.705] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 7)
[ 18.705] (**) Option "xkb_rules" "evdev"
[ 18.705] (**) Option "xkb_model" "pc105"
[ 18.705] (**) Option "xkb_layout" "gb"
[ 18.706] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=9 (/dev/input/event13)
[ 18.706] (II) No input driver specified, ignoring this device.
[ 18.706] (II) This device may have been added with another device file.
[ 18.706] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=8 (/dev/input/event14)
[ 18.706] (II) No input driver specified, ignoring this device.
[ 18.706] (II) This device may have been added with another device file.
[ 18.706] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=7 (/dev/input/event15)
[ 18.706] (II) No input driver specified, ignoring this device.
[ 18.706] (II) This device may have been added with another device file.
[ 18.706] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=3 (/dev/input/event16)
[ 18.706] (II) No input driver specified, ignoring this device.
[ 18.706] (II) This device may have been added with another device file.
[ 18.707] (II) config/udev: Adding input device Pulse-Eight USB-CEC Adapter (/dev/input/event2)
***[data removed]***
[ 18.708] (II) config/udev: Adding input device Logitech USB Receiver (/dev/input/mouse1)
[ 18.709] (II) No input driver specified, ignoring this device.
[ 18.709] (II) This device may have been added with another device file.
[ 18.709] (II) config/udev: Adding input device HDA Intel MID Line (/dev/input/event10)
[ 18.709] (II) No input driver specified, ignoring this device.
[ 18.709] (II) This device may have been added with another device file.
[ 18.709] (II) config/udev: Adding input device HDA Intel MID Front Mic (/dev/input/event11)
[ 18.709] (II) No input driver specified, ignoring this device.
[ 18.709] (II) This device may have been added with another device file.
[ 18.709] (II) config/udev: Adding input device HDA Intel MID Rear Mic (/dev/input/event12)
[ 18.709] (II) No input driver specified, ignoring this device.
[ 18.709] (II) This device may have been added with another device file.
[ 18.709] (II) config/udev: Adding input device HDA Intel MID Front Headphone (/dev/input/event5)
[ 18.709] (II) No input driver specified, ignoring this device.
[ 18.709] (II) This device may have been added with another device file.
[ 18.709] (II) config/udev: Adding input device HDA Intel MID Line Out Side (/dev/input/event6)
[ 18.709] (II) No input driver specified, ignoring this device.
[ 18.709] (II) This device may have been added with another device file.
[ 18.710] (II) config/udev: Adding input device HDA Intel MID Line Out CLFE (/dev/input/event7)
[ 18.710] (II) No input driver specified, ignoring this device.
[ 18.710] (II) This device may have been added with another device file.
[ 18.710] (II) config/udev: Adding input device HDA Intel MID Line Out Surround (/dev/input/event8)
[ 18.710] (II) No input driver specified, ignoring this device.
[ 18.710] (II) This device may have been added with another device file.
[ 18.710] (II) config/udev: Adding input device HDA Intel MID Line Out Front (/dev/input/event9)
[ 18.710] (II) No input driver specified, ignoring this device.
[ 18.710] (II) This device may have been added with another device file.
[ 20.181] (II) NVIDIA(GPU-0): Display (SAMSUNG (DFP-1)) does not support NVIDIA 3D Vision
[ 20.181] (II) NVIDIA(GPU-0): stereo.
[ 20.181] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[ 20.181] (**) NVIDIA(0): device SAMSUNG (DFP-1) (Using EDID frequencies has been
[ 20.181] (**) NVIDIA(0): enabled on all display devices.)
[ 21.743] (II) NVIDIA(GPU-0): Display (SAMSUNG (DFP-1)) does not support NVIDIA 3D Vision
[ 21.743] (II) NVIDIA(GPU-0): stereo.
[ 21.743] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[ 21.743] (**) NVIDIA(0): device SAMSUNG (DFP-1) (Using EDID frequencies has been
[ 21.743] (**) NVIDIA(0): enabled on all display devices.)
[ 30.475] (II) NVIDIA(GPU-0): Display (SAMSUNG (DFP-1)) does not support NVIDIA 3D Vision
[ 30.475] (II) NVIDIA(GPU-0): stereo.
[ 30.475] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[ 30.475] (**) NVIDIA(0): device SAMSUNG (DFP-1) (Using EDID frequencies has been
[ 30.475] (**) NVIDIA(0): enabled on all display devices.)
[ 30.659] (II) XKB: reuse xkmfile /var/lib/xkb/server-B20D7FC79C7F597315E3E501AEF10E0D866E8E92.xkm
[ 30.743] (II) NVIDIA(GPU-0): Display (SAMSUNG (DFP-1)) does not support NVIDIA 3D Vision
[ 30.743] (II) NVIDIA(GPU-0): stereo.
[ 30.743] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[ 30.743] (**) NVIDIA(0): device SAMSUNG (DFP-1) (Using EDID frequencies has been
[ 30.743] (**) NVIDIA(0): enabled on all display devices.)
[ 31.261] (II) NVIDIA(GPU-0): Display (SAMSUNG (DFP-1)) does not support NVIDIA 3D Vision
[ 31.261] (II) NVIDIA(GPU-0): stereo.
[ 31.261] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[ 31.261] (**) NVIDIA(0): device SAMSUNG (DFP-1) (Using EDID frequencies has been
[ 31.261] (**) NVIDIA(0): enabled on all display devices.)
[ 33.024] (II) XKB: reuse xkmfile /var/lib/xkb/server-B8CD4FE5A1833D7AB4B402792017A55B628FCF2D.xkm
[ 33.032] (II) XKB: reuse xkmfile /var/lib/xkb/server-B8CD4FE5A1833D7AB4B402792017A55B628FCF2D.xkm
[ 33.172] (II) NVIDIA(GPU-0): Display (SAMSUNG (DFP-1)) does not support NVIDIA 3D Vision
[ 33.172] (II) NVIDIA(GPU-0): stereo.
[ 33.172] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[ 33.172] (**) NVIDIA(0): device SAMSUNG (DFP-1) (Using EDID frequencies has been
[ 33.172] (**) NVIDIA(0): enabled on all display devices.)
[ 34.933] (II) XKB: reuse xkmfile /var/lib/xkb/server-07844D531AFAE8C05AD2DE44539CA82502952248.xkm
[ 53.638] (II) NVIDIA(GPU-0): Display (SAMSUNG (DFP-1)) does not support NVIDIA 3D Vision
[ 53.638] (II) NVIDIA(GPU-0): stereo.
[ 53.638] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[ 53.638] (**) NVIDIA(0): device SAMSUNG (DFP-1) (Using EDID frequencies has been
[ 53.638] (**) NVIDIA(0): enabled on all display devices.)
[ 1274.427] (II) NVIDIA(GPU-0): Display (SAMSUNG (DFP-1)) does not support NVIDIA 3D Vision
[ 1274.427] (II) NVIDIA(GPU-0): stereo.
[ 1274.427] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[ 1274.427] (**) NVIDIA(0): device SAMSUNG (DFP-1) (Using EDID frequencies has been
[ 1274.427] (**) NVIDIA(0): enabled on all display devices.)
[ 3884.333] (II) evdev: Logitech USB Receiver: Close
[ 3884.333] (II) UnloadModule: "evdev"
[ 3884.333] (II) evdev: Logitech USB Receiver: Close
[ 3884.333] (II) UnloadModule: "evdev"
[ 3884.333] (II) evdev: Pulse-Eight USB-CEC Adapter: Close
[ 3884.333] (II) UnloadModule: "evdev"
[ 3884.333] (II) evdev: Power Button: Close
[ 3884.333] (II) UnloadModule: "evdev"
[ 3884.333] (II) evdev: Power Button: Close
[ 3884.333] (II) UnloadModule: "evdev"
[ 3884.688] (EE) Server terminated successfully (0). Closing log file.
Como eu disse, procurando por pensamentos sobre como progredir. Obrigado.
Esse erro é exibido porque você executou "vdpauinfo" com "sudo". Tente novamente com "vdpauinfo" sem "sudo".