Eu tentei resolver um problema usando alguma solução encontrada online, mas não há como iniciar o wifi (acho que o driver não foi encontrado). Alguma ideia de como resolver?
########## wireless info START ##########
Report from: 22 Feb 2018 20:50 CET +0100
Booted last: 22 Feb 2018 00:00 CET +0100
Script from: 10 Jan 2018 20:04 UTC +0000
##### release ###########################
Distributor ID: Ubuntu
Description: Ubuntu 16.04.3 LTS
Release: 16.04
Codename: xenial
##### kernel ############################
Linux 4.13.0-36-generic #40~16.04.1-Ubuntu SMP Fri Feb 16 23:25:58 UTC 2018 x86_64 x86_64 x86_64 GNU/Linux
Parameters: ro, quiet, splash, vt.handoff=7
##### desktop ###########################
Ubuntu
##### lspci #############################
02:00.0 Network controller [0280]: Intel Corporation Wireless 8260 [8086:24f3] (rev 3a)
Subsystem: Intel Corporation Wireless 8260 [8086:0110]
Kernel modules: iwlwifi
##### lsusb #############################
Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 001 Device 003: ID 8087:0a2b Intel Corp.
Bus 001 Device 002: ID 0bda:58d2 Realtek Semiconductor Corp.
Bus 001 Device 004: ID 13fe:3d00 Kingston Technology Company Inc.
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
##### PCMCIA card info ##################
##### rfkill ############################
0: hci0: Bluetooth
Soft blocked: no
Hard blocked: no
##### lsmod #############################
iwlwifi 249856 0
cfg80211 614400 1 iwlwifi
asus_nb_wmi 28672 0
asus_wmi 28672 1 asus_nb_wmi
sparse_keymap 16384 1 asus_wmi
wmi_bmof 16384 0
mxm_wmi 16384 1 nouveau
wmi 24576 4 asus_wmi,wmi_bmof,mxm_wmi,nouveau
video 40960 3 asus_wmi,nouveau,i915
##### interfaces ########################
[/etc/network/interfaces]
auto lo
iface lo inet loopback
##### ifconfig ##########################
lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
inet6 addr: ::1/128 Scope:Host
UP LOOPBACK RUNNING MTU:65536 Metric:1
RX packets:2276 errors:0 dropped:0 overruns:0 frame:0
TX packets:2276 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:168656 (168.6 KB) TX bytes:168656 (168.6 KB)
##### iwconfig ##########################
lo no wireless extensions.
##### route #############################
Kernel IP routing table
Destination Gateway Genmask Flags Metric Ref Use Iface
##### resolv.conf #######################
##### network managers ##################
Installed:
NetworkManager
Running:
root 822 1 0 20:43 ? 00:00:00 /usr/sbin/NetworkManager --no-daemon
##### NetworkManager info ###############
##### NetworkManager.state ##############
[main]
NetworkingEnabled=true
WirelessEnabled=true
WWANEnabled=true
##### NetworkManager.conf ###############
[main]
plugins=ifupdown,keyfile,ofono
dns=dnsmasq
[ifupdown]
managed=false
##### NetworkManager profiles ###########
##### Netplan config ####################
##### iw reg get ########################
Region: Europe/Rome (based on set time zone)
country 00: DFS-UNSET
(2402 - 2472 @ 40), (N/A, 20), (N/A)
(2457 - 2482 @ 40), (N/A, 20), (N/A), NO-IR
(2474 - 2494 @ 20), (N/A, 20), (N/A), NO-OFDM, NO-IR
(5170 - 5250 @ 80), (N/A, 20), (N/A), NO-IR
(5250 - 5330 @ 80), (N/A, 20), (0 ms), DFS, NO-IR
(5490 - 5730 @ 160), (N/A, 20), (0 ms), DFS, NO-IR
(5735 - 5835 @ 80), (N/A, 20), (N/A), NO-IR
(57240 - 63720 @ 2160), (N/A, 0), (N/A)
##### iwlist channels ###################
lo no frequency information.
##### iwlist scan #######################
lo Interface doesn't support scanning.
##### module infos ######################
[iwlwifi]
filename: /lib/modules/4.13.0-36-generic/kernel/drivers/net/wireless/intel/iwlwifi/iwlwifi.ko
license: GPL
author: Copyright(c) 2003- 2015 Intel Corporation <[email protected]>
description: Intel(R) Wireless WiFi driver for Linux
firmware: iwlwifi-100-5.ucode
firmware: iwlwifi-1000-5.ucode
firmware: iwlwifi-135-6.ucode
firmware: iwlwifi-105-6.ucode
firmware: iwlwifi-2030-6.ucode
firmware: iwlwifi-2000-6.ucode
firmware: iwlwifi-5150-2.ucode
firmware: iwlwifi-5000-5.ucode
firmware: iwlwifi-6000g2b-6.ucode
firmware: iwlwifi-6000g2a-6.ucode
firmware: iwlwifi-6050-5.ucode
firmware: iwlwifi-6000-6.ucode
firmware: iwlwifi-7265D-29.ucode
firmware: iwlwifi-7265-17.ucode
firmware: iwlwifi-3168-29.ucode
firmware: iwlwifi-3160-17.ucode
firmware: iwlwifi-7260-17.ucode
firmware: iwlwifi-8265-33.ucode
firmware: iwlwifi-8000C-33.ucode
firmware: iwlwifi-9260-th-b0-jf-b0--33.ucode
firmware: iwlwifi-9260-th-a0-jf-a0--33.ucode
firmware: iwlwifi-9000-pu-a0-jf-b0--33.ucode
firmware: iwlwifi-9000-pu-a0-jf-a0--33.ucode
firmware: iwlwifi-Qu-a0-jf-b0--33.ucode
firmware: iwlwifi-Qu-a0-hr-a0--33.ucode
srcversion: 339D7D3BD0DD2A9C7FE616F
depends: cfg80211
intree: Y
name: iwlwifi
vermagic: 4.13.0-36-generic SMP mod_unload
parm: swcrypto:using crypto in software (default 0 [hardware]) (int)
parm: 11n_disable:disable 11n functionality, bitmap: 1: full, 2: disable agg TX, 4: disable agg RX, 8 enable agg TX (uint)
parm: amsdu_size:amsdu size 0: 12K for multi Rx queue devices, 4K for other devices 1:4K 2:8K 3:12K (default 0) (int)
parm: fw_restart:restart firmware in case of error (default true) (bool)
parm: antenna_coupling:specify antenna coupling in dB (default: 0 dB) (int)
parm: nvm_file:NVM file name (charp)
parm: d0i3_disable:disable d0i3 functionality (default: Y) (bool)
parm: lar_disable:disable LAR functionality (default: N) (bool)
parm: uapsd_disable:disable U-APSD functionality bitmap 1: BSS 2: P2P Client (default: 3) (uint)
parm: bt_coex_active:enable wifi/bt co-exist (default: enable) (bool)
parm: led_mode:0=system default, 1=On(RF On)/Off(RF Off), 2=blinking, 3=Off (default: 0) (int)
parm: power_save:enable WiFi power management (default: disable) (bool)
parm: power_level:default power save level (range from 1 - 5, default: 1) (int)
parm: fw_monitor:firmware monitor - to debug FW (default: false - needs lots of memory) (bool)
parm: d0i3_timeout:Timeout to D0i3 entry when idle (ms) (uint)
parm: disable_11ac:Disable VHT capabilities (default: false) (bool)
[cfg80211]
filename: /lib/modules/4.13.0-36-generic/kernel/net/wireless/cfg80211.ko
description: wireless configuration support
license: GPL
author: Johannes Berg
srcversion: A5EDD7467E172A70410EBCD
depends:
intree: Y
name: cfg80211
vermagic: 4.13.0-36-generic SMP mod_unload
parm: bss_entries_limit:limit to number of scan BSS entries (per wiphy, default 1000) (int)
parm: ieee80211_regdom:IEEE 802.11 regulatory domain code (charp)
parm: cfg80211_disable_40mhz_24ghz:Disable 40MHz support in the 2.4GHz band (bool)
##### module parameters #################
[iwlwifi]
11n_disable: 0
amsdu_size: 0
antenna_coupling: 0
bt_coex_active: Y
d0i3_disable: Y
d0i3_timeout: 1000
disable_11ac: N
fw_monitor: N
fw_restart: Y
lar_disable: N
led_mode: 0
nvm_file: (null)
power_level: 0
power_save: N
swcrypto: 0
uapsd_disable: 3
[cfg80211]
bss_entries_limit: 1000
cfg80211_disable_40mhz_24ghz: N
ieee80211_regdom: 00
##### /etc/modules ######################
##### modprobe options ##################
[/etc/modprobe.d/blacklist-ath_pci.conf]
blacklist ath_pci
[/etc/modprobe.d/blacklist.conf]
blacklist evbug
blacklist usbmouse
blacklist usbkbd
blacklist eepro100
blacklist de4x5
blacklist eth1394
blacklist snd_intel8x0m
blacklist snd_aw2
blacklist i2c_i801
blacklist prism54
blacklist bcm43xx
blacklist garmin_gps
blacklist asus_acpi
blacklist snd_pcsp
blacklist pcspkr
blacklist amd76x_edac
[/etc/modprobe.d/blacklist-rare-network.conf]
alias net-pf-3 off
alias net-pf-6 off
alias net-pf-9 off
alias net-pf-11 off
alias net-pf-12 off
alias net-pf-19 off
alias net-pf-21 off
alias net-pf-36 off
[/etc/modprobe.d/iwlwifi.conf]
remove iwlwifi \
(/sbin/lsmod | grep -o -e ^iwlmvm -e ^iwldvm -e ^iwlwifi | xargs /sbin/rmmod) \
&& /sbin/modprobe -r mac80211
[/etc/modprobe.d/mlx4.conf]
softdep mlx4_core post: mlx4_en
##### rc.local ##########################
exit 0
##### pm-utils ##########################
##### udev rules ########################
##### dmesg #############################
[ 3.235286] iwlwifi 0000:02:00.0: enabling device (0000 -> 0002)
[ 3.239519] iwlwifi 0000:02:00.0: Direct firmware load for iwlwifi-8000C-33.ucode failed with error -2
[ 3.239539] iwlwifi 0000:02:00.0: Direct firmware load for iwlwifi-8000C-32.ucode failed with error -2
[ 3.239548] iwlwifi 0000:02:00.0: Direct firmware load for iwlwifi-8000C-31.ucode failed with error -2
[ 3.239557] iwlwifi 0000:02:00.0: Direct firmware load for iwlwifi-8000C-30.ucode failed with error -2
[ 3.239565] iwlwifi 0000:02:00.0: Direct firmware load for iwlwifi-8000C-29.ucode failed with error -2
[ 3.239575] iwlwifi 0000:02:00.0: Direct firmware load for iwlwifi-8000C-28.ucode failed with error -2
[ 3.239584] iwlwifi 0000:02:00.0: Direct firmware load for iwlwifi-8000C-27.ucode failed with error -2
[ 3.239594] iwlwifi 0000:02:00.0: Direct firmware load for iwlwifi-8000C-26.ucode failed with error -2
[ 3.239603] iwlwifi 0000:02:00.0: Direct firmware load for iwlwifi-8000C-25.ucode failed with error -2
[ 3.239612] iwlwifi 0000:02:00.0: Direct firmware load for iwlwifi-8000C-24.ucode failed with error -2
[ 3.239621] iwlwifi 0000:02:00.0: Direct firmware load for iwlwifi-8000C-23.ucode failed with error -2
[ 3.239629] iwlwifi 0000:02:00.0: Direct firmware load for iwlwifi-8000C-22.ucode failed with error -2
[ 3.239631] iwlwifi 0000:02:00.0: no suitable firmware found!
[ 3.239634] iwlwifi 0000:02:00.0: minimum version required: iwlwifi-8000C-22
[ 3.239636] iwlwifi 0000:02:00.0: maximum version supported: iwlwifi-8000C-33
[ 3.239638] iwlwifi 0000:02:00.0: check git://git.kernel.org/pub/scm/linux/kernel/git/firmware/linux-firmware.git
[ 4.578780] Bluetooth: hci0: Waiting for firmware download to complete
########## wireless info END ############
Você tem um driver, mas não tem firmware. Em algum outro computador, faça o download deste pacote em um pen drive: link
Arraste e solte o pacote da unidade flash para a área de trabalho do Ubuntu. Então abra um terminal e faça:
cd ~/Desktop
sudo dpkg -i linux-firmware*.deb
sudo modprobe -r iwlwifi && sudo modprobe iwlwifi
O seu wireless está funcionando agora? Pode ser necessário reiniciar.
se você tiver conexão à internet com fio, basta acessar o SOFTWARE & amp; UPDATE e clique em DRIVERS ADICIONAIS de lá você pode facilmente instalar ou ativar o seu wireless. funcionou para mim.