Eu tenho um adaptador de rede Bluetooth + wi-fi de combinação Broadcom 43142, e estou tentando fazer com que ele funcione bem com o Ubuntu 16.04. Eu sou novo no Linux, então estou lutando para entender algumas das soluções possíveis na internet. Um recurso que eu encontrei indica que eu preciso instalar o firmware correto de uma lista que eles fornecem. Na página Leia-me do repositório do github, há alguma saída de terminal na qual você pode descobrir qual firmware é necessário, mas não diz qual comando é usado para alcançar essa saída. O exemplo de saída é o seguinte:
Bluetooth: hci1: BCM: chip id 63
Bluetooth: hci1: BCM20702A
Bluetooth: hci1: BCM20702A1 (001.002.014) build 0000
bluetooth hci1: Direct firmware load for brcm/BCM20702A1-0b05-17cb.hcd failed with error -2
Bluetooth: hci1: BCM: Patch brcm/BCM20702A1-0b05-17cb.hcd not found
A partir disso, pode-se determinar que o firmware requerido é brcm / BCM20702A1-0b05-17cb.hcd.
Como posso encontrar essa informação no meu próprio sistema?
Obrigado antecipadamente.
Mais informações: Algumas pessoas podem pedir para ver a saída de alguns comandos do terminal. Aqui está o que eu tenho até agora:
lspci :
00:00.0 Host bridge: Intel Corporation Broadwell-U Host Bridge -OPI (rev 09)
00:02.0 VGA compatible controller: Intel Corporation Broadwell-U Integrated Graphics (rev 09)
00:03.0 Audio device: Intel Corporation Broadwell-U Audio Controller (rev 09)
00:14.0 USB controller: Intel Corporation Wildcat Point-LP USB xHCI Controller (rev 03)
00:16.0 Communication controller: Intel Corporation Wildcat Point-LP MEI Controller #1 (rev 03)
00:1b.0 Audio device: Intel Corporation Wildcat Point-LP High Definition Audio Controller (rev 03)
00:1c.0 PCI bridge: Intel Corporation Wildcat Point-LP PCI Express Root Port #1 (rev e3)
00:1c.2 PCI bridge: Intel Corporation Wildcat Point-LP PCI Express Root Port #3 (rev e3)
00:1c.3 PCI bridge: Intel Corporation Wildcat Point-LP PCI Express Root Port #4 (rev e3)
00:1c.4 PCI bridge: Intel Corporation Wildcat Point-LP PCI Express Root Port #5 (rev e3)
00:1d.0 USB controller: Intel Corporation Wildcat Point-LP USB EHCI Controller (rev 03)
00:1f.0 ISA bridge: Intel Corporation Wildcat Point-LP LPC Controller (rev 03)
00:1f.2 SATA controller: Intel Corporation Wildcat Point-LP SATA Controller [AHCI Mode] (rev 03)
00:1f.3 SMBus: Intel Corporation Wildcat Point-LP SMBus Controller (rev 03)
06:00.0 Network controller: Broadcom Corporation BCM43142 802.11b/g/n (rev 01)
07:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8101/2/6E PCI Express Fast/Gigabit Ethernet controller (rev 07)
08:00.0 3D controller: NVIDIA Corporation GM108M [GeForce 840M] (rev a2)\
lsusb :
Bus 001 Device 005: ID 0bda:0129 Realtek Semiconductor Corp. RTS5129 Card Reader Controller
Bus 001 Device 004: ID 0a5c:21d7 Broadcom Corp. BCM43142 Bluetooth 4.0
Bus 001 Device 003: ID 0c45:6a04 Microdia
Bus 001 Device 002: ID 8087:8001 Intel Corp.
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 003 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 002 Device 002: ID 046d:c52f Logitech, Inc. Unifying Receiver
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
status do bluetooth do serviço sudo :
● bluetooth.service - Bluetooth service
Loaded: loaded (/lib/systemd/system/bluetooth.service; enabled; vendor preset: enabled)
Active: active (running) since Mon 2018-01-15 19:42:53 SAST; 1h 39min ago
Docs: man:bluetoothd(8)
Main PID: 1027 (bluetoothd)
Status: "Running"
CGroup: /system.slice/bluetooth.service
└─1027 /usr/lib/bluetooth/bluetoothd
Jan 15 19:42:53 Matt-Laptop bluetoothd[1027]: Not enough free handles to register service
Jan 15 19:42:53 Matt-Laptop bluetoothd[1027]: Sap driver initialization failed.
Jan 15 19:42:53 Matt-Laptop bluetoothd[1027]: sap-server: Operation not permitted (1)
Jan 15 19:43:03 Matt-Laptop bluetoothd[1027]: Endpoint registered: sender=:1.47 path=/MediaEndpoint/A2DPSource
Jan 15 19:43:03 Matt-Laptop bluetoothd[1027]: Endpoint registered: sender=:1.47 path=/MediaEndpoint/A2DPSink
Jan 15 19:43:52 Matt-Laptop bluetoothd[1027]: Endpoint registered: sender=:1.74 path=/MediaEndpoint/A2DPSource
Jan 15 19:43:52 Matt-Laptop bluetoothd[1027]: Endpoint registered: sender=:1.74 path=/MediaEndpoint/A2DPSink
Jan 15 19:43:52 Matt-Laptop bluetoothd[1027]: RFCOMM server failed for Headset Voice gateway: rfcomm_bind: Address already in use (98)
Jan 15 19:44:08 Matt-Laptop bluetoothd[1027]: Endpoint unregistered: sender=:1.47 path=/MediaEndpoint/A2DPSource
Jan 15 19:44:08 Matt-Laptop bluetoothd[1027]: Endpoint unregistered: sender=:1.47 path=/MediaEndpoint/A2DPSink
lista rfkill :
0: phy0: Wireless LAN
Soft blocked: no
Hard blocked: no
1: brcmwl-0: Wireless LAN
Soft blocked: no
Hard blocked: no
2: hci0: Bluetooth
Soft blocked: no
Hard blocked: no
Como solicitado, aqui está a solução para o problema (copiada da minha edição no post original)
O comando do terminal necessário para mostrar o status do driver para o meu driver bluetooth é o seguinte:
dmesg | grep -i bluetooth
Obrigado pela ajuda, tudo.