Eu preferi comprar HP Impressora Multifuncional Deskjet Ink Advantage 2645 da flipkart. Esta é uma impressora de vantagem de tinta com muitas facilidades, como Impressão, Cópia, Digitalização & amp; Fax.
O requisito básico do sistema para esta impressora é o seguinte
Operating System Windows: XP (32 bits, SP3), Vista, 7, 8, Mac OS X: versão 10.6, Leão, Leão da montanha
Hard Drive Windows 7 e 8: 2 GB de espaço livre no disco rígido, Windows Vista - 2 GB de espaço livre no disco rígido, Windows XP (32 bits SP3) - 750 MB de espaço livre no disco rígido, Mac OS X v10.6 , OS X Lion, OS X Mountain Lion - 1 GB de espaço livre no disco rígido
Processor Processador do Windows 7 e Windows 8: 1 GHz, Windows Vista: Processador de 800 MHz, Windows XP (32 bits, SP3): Intel Pentium II, Processador Celeron, Processador de 233 MHz, Mac OS X v10.6 - Processador Intel Core, OS X Lion - Processador Intel Core, OS X Mountain Lion - Processador Intel Core
Other System Requirements Ligação à Internet, Internet Explorer 6 ou superior, CD-ROM, unidade de DVD, porta USB
A saída de lshw -class processor que fornece as informações sobre meu processador
*-cpu:0 DISABLED
description: CPU [empty]
product: (To Be Filled By O.E.M.)
physical id: 4
serial: To Be Filled By O.E.M.
slot: CPU 1
*-cpu:1
product: Pentium(R) Dual-Core CPU E5500 @ 2.80GHz
vendor: Intel Corp.
physical id: 1
bus info: cpu@0
version: 6.7.10
serial: 0001-067A-0000-0000-0000-0000
size: 2800MHz
capacity: 2800MHz
width: 64 bits
capabilities: boot fpu fpu_exception wp vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe nx x86-64 constant_tsc arch_perfmon pebs bts aperfmperf pni dtes64 monitor ds_cpl vmx est tm2 ssse3 cx16 xtpr pdcm xsave lahf_lm dtherm tpr_shadow vnmi flexpriority cpufreq
configuration: id=0
*-logicalcpu:0
description: Logical CPU
physical id: 0.1
width: 64 bits
capabilities: logical
*-logicalcpu:1
description: Logical CPU
physical id: 0.2
width: 64 bits
capabilities: logical
*-cpu:2
physical id: 2
bus info: cpu@1
version: 6.7.10
serial: 0001-067A-0000-0000-0000-0000
size: 1200MHz
capacity: 1200MHz
capabilities: vmx ht cpufreq
configuration: id=0
*-logicalcpu:0
description: Logical CPU
physical id: 0.1
capabilities: logical
*-logicalcpu:1
description: Logical CPU
physical id: 0.2
capabilities: logical
e a saída do hdparm -I / dev / sda é a seguinte, fornece informações sobre o meu hardrive
/dev/sda:
ATA device, with non-removable media
Model Number: ST500DM002-1BD142
Serial Number: W2A1MGAL
Firmware Revision: KC48
Transport: Serial, SATA Rev 3.0
Standards:
Used: unknown (minor revision code 0x0029)
Supported: 8 7 6 5
Likely used: 8
Configuration:
Logical max current
cylinders 16383 16383
heads 16 16
sectors/track 63 63
--
CHS current addressable sectors: 16514064
LBA user addressable sectors: 268435455
LBA48 user addressable sectors: 976773168
Logical Sector size: 512 bytes
Physical Sector size: 4096 bytes
Logical Sector-0 offset: 0 bytes
device size with M = 1024*1024: 476940 MBytes
device size with M = 1000*1000: 500107 MBytes (500 GB)
cache/buffer size = 16384 KBytes
Nominal Media Rotation Rate: 7200
Capabilities:
LBA, IORDY(can be disabled)
Queue depth: 32
Standby timer values: spec'd by Standard, no device specific minimum
R/W multiple sector transfer: Max = 16 Current = 16
Recommended acoustic management value: 208, current value: 208
DMA: mdma0 mdma1 mdma2 udma0 udma1 udma2 udma3 udma4 udma5 *udma6
Cycle time: min=120ns recommended=120ns
PIO: pio0 pio1 pio2 pio3 pio4
Cycle time: no flow control=120ns IORDY flow control=120ns
Commands/features:
Enabled Supported:
* SMART feature set
Security Mode feature set
* Power Management feature set
* Write cache
* Look-ahead
* Host Protected Area feature set
* WRITE_BUFFER command
* READ_BUFFER command
* DOWNLOAD_MICROCODE
Power-Up In Standby feature set
* SET_FEATURES required to spinup after power up
SET_MAX security extension
* Automatic Acoustic Management feature set
* 48-bit Address feature set
* Device Configuration Overlay feature set
* Mandatory FLUSH_CACHE
* FLUSH_CACHE_EXT
* SMART error logging
* SMART self-test
* General Purpose Logging feature set
* WRITE_{DMA|MULTIPLE}_FUA_EXT
* 64-bit World wide name
Write-Read-Verify feature set
* WRITE_UNCORRECTABLE_EXT command
* {READ,WRITE}_DMA_EXT_GPL commands
* Segmented DOWNLOAD_MICROCODE
* Gen1 signaling speed (1.5Gb/s)
* Gen2 signaling speed (3.0Gb/s)
* Gen3 signaling speed (6.0Gb/s)
* Native Command Queueing (NCQ)
* Phy event counters
* READ_LOG_DMA_EXT equivalent to READ_LOG_EXT
Device-initiated interface power management
* Software settings preservation
* SMART Command Transport (SCT) feature set
* SCT Read/Write Long (AC1), obsolete
* SCT Write Same (AC2)
* SCT Error Recovery Control (AC3)
* SCT Features Control (AC4)
* SCT Data Tables (AC5)
unknown 206[12] (vendor specific)
unknown 206[13] (vendor specific)
Security:
Master password revision code = 65534
supported
not enabled
not locked
frozen
not expired: security count
supported: enhanced erase
82min for SECURITY ERASE UNIT. 82min for ENHANCED SECURITY ERASE UNIT.
Logical Unit WWN Device Identifier: 5000c5003cdc1714
NAA : 5
IEEE OUI : 000c50
Unique ID : 03cdc1714
Checksum: correct
Acredito que o hardware do meu computador é compatível com esta impressora, mas estou usando o Ubuntu 14.04 e não tenho certeza se isso é compatível.