Apple macbook air modelo 1.1 - Lubuntu 14.04 64 bit - wifi Broadcom BCM4321 não funciona

0

Eu estava pesquisando na internet, mas não encontrei nenhuma resposta. Eu tenho ar mabook com cartão wifi BCM4321.

02:00.0 Network controller [0280]: Broadcom Corporation BCM4321 802.11a/b/g/n [14e4:4328] (rev 05)

Primeiro de tudo, eu tentei isso sem sucesso: link

Eu coloquei na lista negra todos os outros drivers e ativei o driver wl. Então eu era capaz de conectar e usar o wifi. Mas só às vezes. Por enquanto estou conectado na internet pelo dongle wifi tp-link.

dmesg quando o wifi não funciona:

[    4.329798] init: plymouth-upastart-bridge main process ended, respawning
[    4.504099] usb 7-1: new low-speed USB device number 2 using uhci_hcd
[    4.681560] usb 7-1: New USB device found, idVendor=05ac, idProduct=8242
[    4.681567] usb 7-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    4.681572] usb 7-1: Product: IR Receiver
[    4.681576] usb 7-1: Manufacturer: Apple Computer, Inc.
[    4.932089] usb 7-2: new full-speed USB device number 3 using uhci_hcd
[    5.120575] usb 7-2: New USB device found, idVendor=05ac, idProduct=0224
[    5.120582] usb 7-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    5.120588] usb 7-2: Product: Apple Internal Keyboard / Trackpad
[    5.120592] usb 7-2: Manufacturer: Apple, Inc.
[    5.584289] usb 2-1.1: new low-speed USB device number 7 using ehci-pci
[    5.679424] usb 2-1.1: New USB device found, idVendor=04f3, idProduct=0234
[    5.679431] usb 2-1.1: New USB device strings: Mfr=0, Product=2, SerialNumber=0
[    5.679435] usb 2-1.1: Product: OM
[    5.752288] usb 2-1.4: new high-speed USB device number 8 using ehci-pci
[    5.844919] usb 2-1.4: New USB device found, idVendor=0bda, idProduct=8179
[    5.844923] usb 2-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    5.844926] usb 2-1.4: Product: 802.11n NIC
[    5.844929] usb 2-1.4: Manufacturer: Realtek
[    5.844931] usb 2-1.4: SerialNumber: 00E04C0001
[    5.921249] usb 5-2.1: new full-speed USB device number 3 using uhci_hcd
[    6.054250] usb 5-2.1: New USB device found, idVendor=05ac, idProduct=8210
[    6.054256] usb 5-2.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    6.054261] usb 5-2.1: Product: Bluetooth USB Host Controller
[    6.054265] usb 5-2.1: Manufacturer: Apple Inc.
[    6.054269] usb 5-2.1: SerialNumber: 001F5BD72EEC
[   11.228155] random: nonblocking pool is initialized
[   14.895416] Adding 2075644k swap on /dev/sda3.  Priority:-1 extents:1 across:2075644k FS
[   14.997640] systemd-udevd[309]: starting version 204
[   15.078955] EXT4-fs (sda2): re-mounted. Opts: errors=remount-ro
[   15.083186] lp: driver loaded but no devices found
[   15.088953] video: module verification failed: signature and/or  required key missing - tainting kernel
[   15.092900] ACPI: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
[   15.093481] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input4
[   15.116537] cfg80211: Calling CRDA to update world regulatory domain
[   15.177419] lib80211: common routines for IEEE802.11 drivers
[   15.177423] lib80211_crypt: registered algorithm 'NULL'
[   15.182089] wl: module license 'MIXED/Proprietary' taints kernel.
[   15.182096] Disabling lock debugging due to kernel taint
[   15.290249] INFO @wl_cfg80211_attach : Registered CFG80211 phy
[   15.383047] lib80211_crypt: registered algorithm 'TKIP'
[   15.462473] ACPI Warning: 0x0000000000000428-0x000000000000042f SystemIO conflicts with Region \PMIO 1 (20131115/utaddress-251)
[   15.462482] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   15.462487] ACPI Warning: 0x0000000000000530-0x000000000000053f SystemIO conflicts with Region \GPIO 1 (20131115/utaddress-251)
[   15.462492] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   15.462494] ACPI Warning: 0x0000000000000500-0x000000000000052f SystemIO conflicts with Region \GPIO 1 (20131115/utaddress-251)
[   15.462498] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   15.462500] lpc_ich: Resource conflict(s) found affecting gpio_ich
[   15.462651] [drm] Initialized drm 1.1.0 20060810
[   15.479746] wlan0: Broadcom BCM4328 802.11 Hybrid Wireless Controller 6.30.223.141 (r415941)
[   15.523651] ppdev: user-space parallel port driver
[   15.584363] i801_smbus 0000:00:1f.3: enabling device (0000 -> 0003)
[   15.585268] i915: unknown parameter 'i915_enable_rc6' ignored
[   15.585632] ACPI Warning: 0x000000000000efa0-0x000000000000efbf SystemIO conflicts with Region \_SB_.PCI0.SBUS.SMBI 1 (20131115/utaddress-251)
[   15.585639] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   15.596309] Bluetooth: Core ver 2.17
[   15.596339] NET: Registered protocol family 31
[   15.596342] Bluetooth: HCI device and connection manager initialized
[   15.596356] Bluetooth: HCI socket layer initialized
[   15.596360] Bluetooth: L2CAP socket layer initialized
[   15.596372] Bluetooth: SCO socket layer initialized
[   15.624092] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[   15.624100] Bluetooth: BNEP filters: protocol multicast
[   15.624118] Bluetooth: BNEP socket layer initialized
[   15.640396] Bluetooth: RFCOMM TTY layer initialized
[   15.640411] Bluetooth: RFCOMM socket layer initialized
[   15.640417] Bluetooth: RFCOMM ver 1.11
[   15.650650] [drm] Memory usable by graphics device = 512M
[   15.650657] checking generic (80000000 640000) vs hw (80000000 10000000)
[   15.650660] fb: conflicting fb hw usage inteldrmfb vs EFI VGA - removing generic driver
[   15.650710] Console: switching to colour dummy device 80x25
[   15.867281] type=1400 audit(1417872450.438:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=488 comm="apparmor_parser"
[   15.867291] type=1400 audit(1417872450.438:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cupsd" pid=488 comm="apparmor_parser"
[   15.867908] type=1400 audit(1417872450.438:4): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=488 comm="apparmor_parser"
[   15.873898] i915 0000:00:02.0: irq 43 for MSI/MSI-X
[   15.884416] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[   15.884420] [drm] Driver supports precise vblank timestamp query.
[   15.884436] i915 0000:00:02.0: Invalid ROM contents
[   15.884441] [drm] failed to find VBIOS tables
[   15.884521] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[   16.057582] type=1400 audit(1417872450.630:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=555 comm="apparmor_parser"
[   16.057593] type=1400 audit(1417872450.630:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=555 comm="apparmor_parser"
[   16.057599] type=1400 audit(1417872450.630:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=555 comm="apparmor_parser"
[   16.058213] type=1400 audit(1417872450.630:8): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=555 comm="apparmor_parser"
[   16.058221] type=1400 audit(1417872450.630:9): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=555 comm="apparmor_parser"
[   16.058536] type=1400 audit(1417872450.630:10): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=555 comm="apparmor_parser"
[   16.065067] type=1400 audit(1417872450.638:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/ntpd" pid=557 comm="apparmor_parser"
[   16.259632] init: failsafe main process (567) killed by TERM signal
[   16.330250] cfg80211: World regulatory domain updated:
[   16.330254] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[   16.330257] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   16.330260] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   16.330263] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[   16.330265] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   16.330268] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   16.755642] input: bcm5974 as /devices/pci0000:00/0000:00:1d.2/usb7/7-2/7-2:1.2/input/input5
[   16.757071] usbcore: registered new interface driver bcm5974
[   16.761210] hidraw: raw HID events driver (C) Jiri Kosina
[   16.797769] input: Apple Computer, Inc. IR Receiver as /devices/pci0000:00/0000:00:1d.2/usb7/7-1/7-1:1.0/input/input6
[   16.798258] appleir 0003:05AC:8242.0001: input,hiddev0,hidraw0: USB HID v1.11 Device [Apple Computer, Inc. IR Receiver] on usb-0000:00:1d.2-1/input0
[   16.805783] usbcore: registered new interface driver usbhid
[   16.805787] usbhid: USB HID core driver
[   16.826335] input: Apple, Inc. Apple Internal Keyboard / Trackpad as /devices/pci0000:00/0000:00:1d.2/usb7/7-2/7-2:1.0/input/input7
[   16.826884] apple 0003:05AC:0224.0002: input,hidraw1: USB HID v1.11 Keyboard [Apple, Inc. Apple Internal Keyboard / Trackpad] on usb-0000:00:1d.2-2/input0
[   16.832596] apple 0003:05AC:0224.0003: hidraw2: USB HID v1.11 Device [Apple, Inc. Apple Internal Keyboard / Trackpad] on usb-0000:00:1d.2-2/input1
[   16.849758] Linux video capture interface: v2.00
[   16.867227] [drm] initialized overlay support
[   16.880358] applesmc: key=266 fan=1 temp=16 index=16 acc=1 lux=2 kbd=1
[   16.932298] input: applesmc as /devices/platform/applesmc.768/input/input8
[   16.992812] uvcvideo: Found UVC 1.00 device Built-in iSight (05ac:8505)
[   16.995964] input: Built-in iSight as /devices/pci0000:00/0000:00:1d.7/usb2/2-4/2-4:1.0/input/input9
[   16.996212] usbcore: registered new interface driver uvcvideo
[   16.996215] USB Video Class driver (1.1.1)
[   17.017955] fbcon: inteldrmfb (fb0) is primary device
[   17.245658] r8188eu: module is from the staging directory, the quality is unknown, you have been warned.
[   17.259008] input: OM as /devices/pci0000:00/0000:00:1d.7/usb2/2-1/2-1.1/2-1.1:1.0/input/input10
[   17.262212] hid-generic 0003:04F3:0234.0004: input,hidraw3: USB HID v1.11 Mouse [OM] on usb-0000:00:1d.7-1.1/input0
[   17.296663] Chip Version Info: CHIP_8188E_Normal_Chip_TSMC_D_CUT_1T1R_RomVer(0)
[   17.329738] usbcore: registered new interface driver r8188eu
[   17.340237] systemd-udevd[326]: renamed network interface wlan1 to wlan2
[   17.345423] R8188EU: Firmware Version 11, SubVersion 1, Signature 0x88e1
[   17.448171] usbcore: registered new interface driver btusb
[   17.583051] Console: switching to colour frame buffer device 160x50
[   17.586744] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[   17.586746] i915 0000:00:02.0: registered panic notifier
[   17.594467] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[   17.594544] snd_hda_intel 0000:00:1b.0: enabling device (0000 -> 0002)
[   17.594805] snd_hda_intel 0000:00:1b.0: irq 44 for MSI/MSI-X
[   17.680882] hda_codec: ALC889A: SKU not ready 0x400000f0
[   17.680985] autoconfig: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker
[   17.680987]    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[   17.680990]    hp_outs=1 (0x15/0x0/0x0/0x0/0x0)
[   17.680991]    mono: mono_out=0x0
[   17.680993]    inputs:
[   17.680995] realtek: No valid SSID, checking pincfg 0x400000f0 for NID 0x1d
[   17.680996] realtek: Enable default setup for auto mode as fallback
[   17.731556] input: HDA Intel Headphone Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
[   17.828525] MAC Address = e8:de:27:11:a9:31
[   17.840706] IPv6: ADDRCONF(NETDEV_UP): wlan2: link is not ready
[   17.841050] IPv6: ADDRCONF(NETDEV_UP): wlan2: link is not ready
[   17.848477] R8188EU: ERROR indicate disassoc
[   17.849967] IPv6: ADDRCONF(NETDEV_UP): wlan2: link is not ready
[   17.948028] [drm] GMBUS [i915 gmbus dpc] timed out, falling back to bit banging on pin 4
[   18.200028] [drm] GMBUS [i915 gmbus dpd] timed out, falling back to bit banging on pin 6
[   18.312191] Non-volatile memory driver v1.3
[   19.524806] init: plymouth-upstart-bridge main process ended, respawning
[   19.536990] init: plymouth-upstart-bridge main process (1533) terminated with status 1
[   19.537008] init: plymouth-upstart-bridge main process ended, respawning
[   22.099850] R8188EU: ERROR assoc success
[   22.100050] IPv6: ADDRCONF(NETDEV_CHANGE): wlan2: link becomes ready
[   23.016083] ACPI : EC: GPE storm detected(12 GPEs), transactions will use polling mode
[   41.043332] ERROR @wl_notify_scan_status : wlan0 Scan_results error (-22)
[   43.115671] R8188EU: ERROR indicate disassoc
[   44.546110] R8188EU: ERROR assoc success
[   74.043282] ERROR @wl_notify_scan_status : wlan0 Scan_results error (-22)
[   88.052042] R8188EU: ERROR linked_status_chk(wlan2) disconnect or roaming
[   90.032828] R8188EU: ERROR assoc success
[  117.049542] ERROR @wl_notify_scan_status : wlan0 Scan_results error (-22)
[  170.047559] ERROR @wl_notify_scan_status : wlan0 Scan_results error (-22)
[  233.044150] ERROR @wl_notify_scan_status : wlan0 Scan_results error (-22)
[  296.045589] ERROR @wl_notify_scan_status : wlan0 Scan_results error (-22)
[  359.044065] ERROR @wl_notify_scan_status : wlan0 Scan_results error (-22)
[  422.043768] ERROR @wl_notify_scan_status : wlan0 Scan_results error (-22)
[  485.047499] ERROR @wl_notify_scan_status : wlan0 Scan_results error (-22)
[  548.045871] ERROR @wl_notify_scan_status : wlan0 Scan_results error (-22)
[  611.043619] ERROR @wl_notify_scan_status : wlan0 Scan_results error (-22)
[  674.045744] ERROR @wl_notify_scan_status : wlan0 Scan_results error (-22)
[  737.048038] ERROR @wl_notify_scan_status : wlan0 Scan_results error (-22)
[  800.045502] ERROR @wl_notify_scan_status : wlan0 Scan_results error (-22)
[  863.047532] ERROR @wl_notify_scan_status : wlan0 Scan_results error (-22)
[  926.045665] ERROR @wl_notify_scan_status : wlan0 Scan_results error (-22)
[  989.049560] ERROR @wl_notify_scan_status : wlan0 Scan_results error (-22)

Existe o lsmod:

mac@mac-MacBookAir:~$ lsmod | grep "brcmsmac\|b43\|ssb\|bcma\|wl"
wl                   4207767  0 
lib80211               14381  2 wl,lib80211_crypt_tkip
brcmsmac              563041  0 
cordic                 12574  1 brcmsmac
brcmutil               15618  1 brcmsmac
bcma                   52096  1 brcmsmac
mac80211              626557  1 brcmsmac
cfg80211              484040  3 wl,brcmsmac,mac80211

e nm-tool:

mac@mac-MacBookAir:~$ nm-tools
Příkaz 'nm-tools' nebyl nalezen. Měli jste na mysli:
 Příkaz 'nm-tool' z balíku 'network-manager' (main)
nm-tools: příkaz nebyl nalezen
mac@mac-MacBookAir:~$ nm-tool

NetworkManager Tool

State: connected (global)

- Device: 1E:AE:46:66:28:F0 ----------------------------------------------------
  Type:              Bluetooth
  Driver:            bluez
  State:             disconnected
  Default:           no

  Capabilities:


- Device: 04:DB:56:3D:86:47 ----------------------------------------------------
  Type:              Bluetooth
  Driver:            bluez
  State:             disconnected
  Default:           no

  Capabilities:


- Device: wlan2  [PobudaJ 1] ---------------------------------------------------
  Type:              802.11 WiFi
  Driver:            r8188eu
  State:             connected
  Default:           yes
  HW Address:        E8:DE:27:11:A9:31

  Capabilities:
    Speed:           54 Mb/s

  Wireless Properties
    WEP Encryption:  yes
    WPA Encryption:  yes
    WPA2 Encryption: yes

  Wireless Access Points (* = current AP)
    Int:             Infra, 64:66:B3:34:BA:96, Freq 2412 MHz, Rate 44 Mb/s, Strength 4 WPA2
    *PobudaJ:        Infra, 40:4A:03:80:74:67, Freq 2422 MHz, Rate 54 Mb/s, Strength 40
    tomas:           Infra, 94:0C:6D:FD:A3:E2, Freq 2412 MHz, Rate 11 Mb/s, Strength 0 WEP
    wap_prochy:      Infra, 00:0B:6B:DA:8B:1C, Freq 2457 MHz, Rate 54 Mb/s, Strength 0 WEP

  IPv4 Settings:
    Address:         10.0.0.3
    Prefix:          24 (255.255.255.0)
    Gateway:         10.0.0.138

    DNS:             10.0.0.138


- Device: wlan0 ----------------------------------------------------------------
  Type:              802.11 WiFi
  Driver:            wl
  State:             disconnected
  Default:           no
  HW Address:        00:1F:5B:D7:37:FA

  Capabilities:

  Wireless Properties
    WEP Encryption:  yes
    WPA Encryption:  yes
    WPA2 Encryption: yes

  Wireless Access Points 

Existe alguém que possa me ajudar por favor? Passei muitas horas procurando por alguma solução. Eu devo estar muito perto porque às vezes isso funciona!

    
por scretch 06.12.2014 / 15:26

2 respostas

2

Eu acredito que o driver proprietário wl está incorreto para o seu dispositivo 14e4: 4328 no Ubuntu 14.04. Além disso, você tem tanto isso, brcmsmac AND o driver para o seu USB sem fio carregado.

Por favor, abra um terminal e faça:

sudo apt-get update
sudo apt-get purge bcmwl-kernel-source
sudo apt-get install firmware-b43-installer

Depois que terminar, desconecte o USB, reinicie e nos informe se houve alguma melhoria.

Se wl continuar a carregar depois que bcmwl-kernel-source for removido, então é possível que o driver também tenha sido compilado a partir da fonte. Vamos colocar na lista negra:

sudo -i
echo "blacklist wl"  >>  /etc/modprobe.d/blacklist.conf
modprobe -r wl
exit

Agora, desconecte o USB e informe se a Broadcom funciona como esperado.

    
por chili555 06.12.2014 / 16:11
0
mac@mac-MacBookAir:~$ nm-tool

NetworkManager Tool

State: connected (global)

- Device: wlan2  [PobudaJ 1] ---------------------------------------------------
  Type:              802.11 WiFi
  Driver:            r8188eu
  State:             connected
  Default:           yes
  HW Address:        E8:DE:27:11:A9:31

  Capabilities:
    Speed:           54 Mb/s

  Wireless Properties
    WEP Encryption:  yes
    WPA Encryption:  yes
    WPA2 Encryption: yes

  Wireless Access Points (* = current AP)
    wap_prochy:      Infra, 00:0B:6B:DA:8B:1C, Freq 2457 MHz, Rate 54 Mb/s, Strength 0 WEP
    Int:             Infra, 64:66:B3:34:BA:96, Freq 2412 MHz, Rate 44 Mb/s, Strength 0 WPA2
    *PobudaJ:        Infra, 40:4A:03:80:74:67, Freq 2422 MHz, Rate 54 Mb/s, Strength 18
    tomas:           Infra, 94:0C:6D:FD:A3:E2, Freq 2412 MHz, Rate 11 Mb/s, Strength 0 WEP

  IPv4 Settings:
    Address:         10.0.0.3
    Prefix:          24 (255.255.255.0)
    Gateway:         10.0.0.138

    DNS:             10.0.0.138


- Device: 1E:AE:46:66:28:F0 ----------------------------------------------------
  Type:              Bluetooth
  Driver:            bluez
  State:             disconnected
  Default:           no

  Capabilities:


- Device: 04:DB:56:3D:86:47 ----------------------------------------------------
  Type:              Bluetooth
  Driver:            bluez
  State:             disconnected
  Default:           no

  Capabilities:


- Device: wlan0 ----------------------------------------------------------------
  Type:              802.11 WiFi
  Driver:            wl
  State:             disconnected
  Default:           no
  HW Address:        00:1F:5B:D7:37:FA

  Capabilities:

  Wireless Properties
    WEP Encryption:  yes
    WPA Encryption:  yes
    WPA2 Encryption: yes

  Wireless Access Points 
    
por scretch 06.12.2014 / 17:01