Erros na instalação do driver sem fio

Question

Eu tenho um dongle sem fio e estou tentando instalar os drivers do Linux daqui .

Quando executo install.sh (só tenho a CLI), recebo esses erros. Como posso fazer isso funcionar? Esta é uma máquina de 64 bits.

/home/zeno/RTL8188C_8192C_USB_linux_v4.0.2_9000.20130911/driver/rtl8188C_8192C_usb_linux_v4.0.2_9000.20130911/os_dep/linux/os_intfs.c: In function ârtw_proc_init_oneâ:
/home/zeno/RTL8188C_8192C_USB_linux_v4.0.2_9000.20130911/driver/rtl8188C_8192C_usb_linux_v4.0.2_9000.20130911/os_dep/linux/os_intfs.c:313:3: error: implicit declaration of function âcreate_proc_entryâ [-Werror=implicit-function-declaration]
   rtw_proc=create_proc_entry(rtw_proc_name, S_IFDIR, init_net.proc_net);
   ^
/home/zeno/RTL8188C_8192C_USB_linux_v4.0.2_9000.20130911/driver/rtl8188C_8192C_usb_linux_v4.0.2_9000.20130911/os_dep/linux/os_intfs.c:313:11: warning: assignment makes pointer from integer without a cast [enabled by default]
   rtw_proc=create_proc_entry(rtw_proc_name, S_IFDIR, init_net.proc_net);
           ^
/home/zeno/RTL8188C_8192C_USB_linux_v4.0.2_9000.20130911/driver/rtl8188C_8192C_usb_linux_v4.0.2_9000.20130911/os_dep/linux/os_intfs.c:320:3: error: implicit declaration of function âcreate_proc_read_entryâ [-Werror=implicit-function-declaration]
   entry = create_proc_read_entry("ver_info", S_IFREG | S_IRUGO, rtw_proc, proc_get_drv_version, dev);
   ^
/home/zeno/RTL8188C_8192C_USB_linux_v4.0.2_9000.20130911/driver/rtl8188C_8192C_usb_linux_v4.0.2_9000.20130911/os_dep/linux/os_intfs.c:320:9: warning: assignment makes pointer from integer without a cast [enabled by default]
   entry = create_proc_read_entry("ver_info", S_IFREG | S_IRUGO, rtw_proc, proc_get_drv_version, dev);
         ^
/home/zeno/RTL8188C_8192C_USB_linux_v4.0.2_9000.20130911/driver/rtl8188C_8192C_usb_linux_v4.0.2_9000.20130911/os_dep/linux/os_intfs.c:326:9: warning: assignment makes pointer from integer without a cast [enabled by default]
   entry = create_proc_read_entry("log_level", S_IFREG | S_IRUGO,
         ^
/home/zeno/RTL8188C_8192C_USB_linux_v4.0.2_9000.20130911/driver/rtl8188C_8192C_usb_linux_v4.0.2_9000.20130911/os_dep/linux/os_intfs.c:332:8: error: dereferencing pointer to incomplete type
   entry->write_proc = proc_set_log_level;
        ^
/home/zeno/RTL8188C_8192C_USB_linux_v4.0.2_9000.20130911/driver/rtl8188C_8192C_usb_linux_v4.0.2_9000.20130911/os_dep/linux/os_intfs.c:348:21: warning: assignment makes pointer from integer without a cast [enabled by default]
   padapter->dir_dev = create_proc_entry(dev->name,
                     ^
/home/zeno/RTL8188C_8192C_USB_linux_v4.0.2_9000.20130911/driver/rtl8188C_8192C_usb_linux_v4.0.2_9000.20130911/os_dep/linux/os_intfs.c:379:8: warning: assignment makes pointer from integer without a cast [enabled by default]
  entry = create_proc_read_entry("write_reg", S_IFREG | S_IRUGO,
        ^
/home/zeno/RTL8188C_8192C_USB_linux_v4.0.2_9000.20130911/driver/rtl8188C_8192C_usb_linux_v4.0.2_9000.20130911/os_dep/linux/os_intfs.c:385:7: error: dereferencing pointer to incomplete type
  entry->write_proc = proc_set_write_reg;
       ^
/home/zeno/RTL8188C_8192C_USB_linux_v4.0.2_9000.20130911/driver/rtl8188C_8192C_usb_linux_v4.0.2_9000.20130911/os_dep/linux/os_intfs.c:387:8: warning: assignment makes pointer from integer without a cast [enabled by default]
  entry = create_proc_read_entry("read_reg", S_IFREG | S_IRUGO,
        ^
/home/zeno/RTL8188C_8192C_USB_linux_v4.0.2_9000.20130911/driver/rtl8188C_8192C_usb_linux_v4.0.2_9000.20130911/os_dep/linux/os_intfs.c:393:7: error: dereferencing pointer to incomplete type
  entry->write_proc = proc_set_read_reg;
       ^
/home/zeno/RTL8188C_8192C_USB_linux_v4.0.2_9000.20130911/driver/rtl8188C_8192C_usb_linux_v4.0.2_9000.20130911/os_dep/linux/os_intfs.c:396:8: warning: assignment makes pointer from integer without a cast [enabled by default]
  entry = create_proc_read_entry("fwstate", S_IFREG | S_IRUGO,
        ^
/home/zeno/RTL8188C_8192C_USB_linux_v4.0.2_9000.20130911/driver/rtl8188C_8192C_usb_linux_v4.0.2_9000.20130911/os_dep/linux/os_intfs.c:404:8: warning: assignment makes pointer from integer without a cast [enabled by default]
  entry = create_proc_read_entry("sec_info", S_IFREG | S_IRUGO,
        ^
/home/zeno/RTL8188C_8192C_USB_linux_v4.0.2_9000.20130911/driver/rtl8188C_8192C_usb_linux_v4.0.2_9000.20130911/os_dep/linux/os_intfs.c:412:8: warning: assignment makes pointer from integer without a cast [enabled by default]
  entry = create_proc_read_entry("mlmext_state", S_IFREG | S_IRUGO,
        ^
/home/zeno/RTL8188C_8192C_USB_linux_v4.0.2_9000.20130911/driver/rtl8188C_8192C_usb_linux_v4.0.2_9000.20130911/os_dep/linux/os_intfs.c:420:8: warning: assignment makes pointer from integer without a cast [enabled by default]
  entry = create_proc_read_entry("qos_option", S_IFREG | S_IRUGO,
        ^
/home/zeno/RTL8188C_8192C_USB_linux_v4.0.2_9000.20130911/driver/rtl8188C_8192C_usb_linux_v4.0.2_9000.20130911/os_dep/linux/os_intfs.c:427:8: warning: assignment makes pointer from integer without a cast [enabled by default]
  entry = create_proc_read_entry("ht_option", S_IFREG | S_IRUGO,
        ^
/home/zeno/RTL8188C_8192C_USB_linux_v4.0.2_9000.20130911/driver/rtl8188C_8192C_usb_linux_v4.0.2_9000.20130911/os_dep/linux/os_intfs.c:434:8: warning: assignment makes pointer from integer without a cast [enabled by default]
  entry = create_proc_read_entry("rf_info", S_IFREG | S_IRUGO,
        ^
/home/zeno/RTL8188C_8192C_USB_linux_v4.0.2_9000.20130911/driver/rtl8188C_8192C_usb_linux_v4.0.2_9000.20130911/os_dep/linux/os_intfs.c:441:8: warning: assignment makes pointer from integer without a cast [enabled by default]
  entry = create_proc_read_entry("ap_info", S_IFREG | S_IRUGO,
        ^
/home/zeno/RTL8188C_8192C_USB_linux_v4.0.2_9000.20130911/driver/rtl8188C_8192C_usb_linux_v4.0.2_9000.20130911/os_dep/linux/os_intfs.c:448:8: warning: assignment makes pointer from integer without a cast [enabled by default]
  entry = create_proc_read_entry("adapter_state", S_IFREG | S_IRUGO,
        ^
/home/zeno/RTL8188C_8192C_USB_linux_v4.0.2_9000.20130911/driver/rtl8188C_8192C_usb_linux_v4.0.2_9000.20130911/os_dep/linux/os_intfs.c:455:8: warning: assignment makes pointer from integer without a cast [enabled by default]
  entry = create_proc_read_entry("trx_info", S_IFREG | S_IRUGO,
        ^
/home/zeno/RTL8188C_8192C_USB_linux_v4.0.2_9000.20130911/driver/rtl8188C_8192C_usb_linux_v4.0.2_9000.20130911/os_dep/linux/os_intfs.c:462:8: warning: assignment makes pointer from integer without a cast [enabled by default]
  entry = create_proc_read_entry("mac_reg_dump1", S_IFREG | S_IRUGO,
        ^
/home/zeno/RTL8188C_8192C_USB_linux_v4.0.2_9000.20130911/driver/rtl8188C_8192C_usb_linux_v4.0.2_9000.20130911/os_dep/linux/os_intfs.c:469:8: warning: assignment makes pointer from integer without a cast [enabled by default]
  entry = create_proc_read_entry("mac_reg_dump2", S_IFREG | S_IRUGO,
        ^
/home/zeno/RTL8188C_8192C_USB_linux_v4.0.2_9000.20130911/driver/rtl8188C_8192C_usb_linux_v4.0.2_9000.20130911/os_dep/linux/os_intfs.c:476:8: warning: assignment makes pointer from integer without a cast [enabled by default]
  entry = create_proc_read_entry("mac_reg_dump3", S_IFREG | S_IRUGO,
        ^
/home/zeno/RTL8188C_8192C_USB_linux_v4.0.2_9000.20130911/driver/rtl8188C_8192C_usb_linux_v4.0.2_9000.20130911/os_dep/linux/os_intfs.c:483:8: warning: assignment makes pointer from integer without a cast [enabled by default]
  entry = create_proc_read_entry("bb_reg_dump1", S_IFREG | S_IRUGO,
        ^
/home/zeno/RTL8188C_8192C_USB_linux_v4.0.2_9000.20130911/driver/rtl8188C_8192C_usb_linux_v4.0.2_9000.20130911/os_dep/linux/os_intfs.c:490:8: warning: assignment makes pointer from integer without a cast [enabled by default]
  entry = create_proc_read_entry("bb_reg_dump2", S_IFREG | S_IRUGO,
        ^
/home/zeno/RTL8188C_8192C_USB_linux_v4.0.2_9000.20130911/driver/rtl8188C_8192C_usb_linux_v4.0.2_9000.20130911/os_dep/linux/os_intfs.c:497:8: warning: assignment makes pointer from integer without a cast [enabled by default]
  entry = create_proc_read_entry("bb_reg_dump3", S_IFREG | S_IRUGO,
        ^
/home/zeno/RTL8188C_8192C_USB_linux_v4.0.2_9000.20130911/driver/rtl8188C_8192C_usb_linux_v4.0.2_9000.20130911/os_dep/linux/os_intfs.c:504:8: warning: assignment makes pointer from integer without a cast [enabled by default]
  entry = create_proc_read_entry("rf_reg_dump1", S_IFREG | S_IRUGO,
        ^
/home/zeno/RTL8188C_8192C_USB_linux_v4.0.2_9000.20130911/driver/rtl8188C_8192C_usb_linux_v4.0.2_9000.20130911/os_dep/linux/os_intfs.c:511:8: warning: assignment makes pointer from integer without a cast [enabled by default]
  entry = create_proc_read_entry("rf_reg_dump2", S_IFREG | S_IRUGO,
        ^
/home/zeno/RTL8188C_8192C_USB_linux_v4.0.2_9000.20130911/driver/rtl8188C_8192C_usb_linux_v4.0.2_9000.20130911/os_dep/linux/os_intfs.c:520:9: warning: assignment makes pointer from integer without a cast [enabled by default]
   entry = create_proc_read_entry("rf_reg_dump3", S_IFREG | S_IRUGO,
         ^
/home/zeno/RTL8188C_8192C_USB_linux_v4.0.2_9000.20130911/driver/rtl8188C_8192C_usb_linux_v4.0.2_9000.20130911/os_dep/linux/os_intfs.c:527:9: warning: assignment makes pointer from integer without a cast [enabled by default]
   entry = create_proc_read_entry("rf_reg_dump4", S_IFREG | S_IRUGO,
         ^
/home/zeno/RTL8188C_8192C_USB_linux_v4.0.2_9000.20130911/driver/rtl8188C_8192C_usb_linux_v4.0.2_9000.20130911/os_dep/linux/os_intfs.c:537:8: warning: assignment makes pointer from integer without a cast [enabled by default]
  entry = create_proc_read_entry("all_sta_info", S_IFREG | S_IRUGO,
        ^
/home/zeno/RTL8188C_8192C_USB_linux_v4.0.2_9000.20130911/driver/rtl8188C_8192C_usb_linux_v4.0.2_9000.20130911/os_dep/linux/os_intfs.c:555:8: warning: assignment makes pointer from integer without a cast [enabled by default]
  entry = create_proc_read_entry("best_channel", S_IFREG | S_IRUGO,
        ^
/home/zeno/RTL8188C_8192C_USB_linux_v4.0.2_9000.20130911/driver/rtl8188C_8192C_usb_linux_v4.0.2_9000.20130911/os_dep/linux/os_intfs.c:561:7: error: dereferencing pointer to incomplete type
  entry->write_proc = proc_set_best_channel;
       ^
/home/zeno/RTL8188C_8192C_USB_linux_v4.0.2_9000.20130911/driver/rtl8188C_8192C_usb_linux_v4.0.2_9000.20130911/os_dep/linux/os_intfs.c:564:8: warning: assignment makes pointer from integer without a cast [enabled by default]
  entry = create_proc_read_entry("rx_signal", S_IFREG | S_IRUGO,
        ^
/home/zeno/RTL8188C_8192C_USB_linux_v4.0.2_9000.20130911/driver/rtl8188C_8192C_usb_linux_v4.0.2_9000.20130911/os_dep/linux/os_intfs.c:570:7: error: dereferencing pointer to incomplete type
  entry->write_proc = proc_set_rx_signal;
       ^
/home/zeno/RTL8188C_8192C_USB_linux_v4.0.2_9000.20130911/driver/rtl8188C_8192C_usb_linux_v4.0.2_9000.20130911/os_dep/linux/os_intfs.c:572:8: warning: assignment makes pointer from integer without a cast [enabled by default]
  entry = create_proc_read_entry("ht_enable", S_IFREG | S_IRUGO,
        ^
/home/zeno/RTL8188C_8192C_USB_linux_v4.0.2_9000.20130911/driver/rtl8188C_8192C_usb_linux_v4.0.2_9000.20130911/os_dep/linux/os_intfs.c:578:7: error: dereferencing pointer to incomplete type
  entry->write_proc = proc_set_ht_enable;
       ^
/home/zeno/RTL8188C_8192C_USB_linux_v4.0.2_9000.20130911/driver/rtl8188C_8192C_usb_linux_v4.0.2_9000.20130911/os_dep/linux/os_intfs.c:580:8: warning: assignment makes pointer from integer without a cast [enabled by default]
  entry = create_proc_read_entry("cbw40_enable", S_IFREG | S_IRUGO,
        ^
/home/zeno/RTL8188C_8192C_USB_linux_v4.0.2_9000.20130911/driver/rtl8188C_8192C_usb_linux_v4.0.2_9000.20130911/os_dep/linux/os_intfs.c:586:7: error: dereferencing pointer to incomplete type
  entry->write_proc = proc_set_cbw40_enable;
       ^
/home/zeno/RTL8188C_8192C_USB_linux_v4.0.2_9000.20130911/driver/rtl8188C_8192C_usb_linux_v4.0.2_9000.20130911/os_dep/linux/os_intfs.c:588:8: warning: assignment makes pointer from integer without a cast [enabled by default]
  entry = create_proc_read_entry("ampdu_enable", S_IFREG | S_IRUGO,
        ^
/home/zeno/RTL8188C_8192C_USB_linux_v4.0.2_9000.20130911/driver/rtl8188C_8192C_usb_linux_v4.0.2_9000.20130911/os_dep/linux/os_intfs.c:594:7: error: dereferencing pointer to incomplete type
  entry->write_proc = proc_set_ampdu_enable;
       ^
/home/zeno/RTL8188C_8192C_USB_linux_v4.0.2_9000.20130911/driver/rtl8188C_8192C_usb_linux_v4.0.2_9000.20130911/os_dep/linux/os_intfs.c:596:8: warning: assignment makes pointer from integer without a cast [enabled by default]
  entry = create_proc_read_entry("rx_stbc", S_IFREG | S_IRUGO,
        ^
/home/zeno/RTL8188C_8192C_USB_linux_v4.0.2_9000.20130911/driver/rtl8188C_8192C_usb_linux_v4.0.2_9000.20130911/os_dep/linux/os_intfs.c:602:7: error: dereferencing pointer to incomplete type
  entry->write_proc = proc_set_rx_stbc;
       ^
/home/zeno/RTL8188C_8192C_USB_linux_v4.0.2_9000.20130911/driver/rtl8188C_8192C_usb_linux_v4.0.2_9000.20130911/os_dep/linux/os_intfs.c:605:8: warning: assignment makes pointer from integer without a cast [enabled by default]
  entry = create_proc_read_entry("path_rssi", S_IFREG | S_IRUGO,
        ^
/home/zeno/RTL8188C_8192C_USB_linux_v4.0.2_9000.20130911/driver/rtl8188C_8192C_usb_linux_v4.0.2_9000.20130911/os_dep/linux/os_intfs.c:608:8: warning: assignment makes pointer from integer without a cast [enabled by default]
  entry = create_proc_read_entry("vid", S_IFREG | S_IRUGO,
        ^
/home/zeno/RTL8188C_8192C_USB_linux_v4.0.2_9000.20130911/driver/rtl8188C_8192C_usb_linux_v4.0.2_9000.20130911/os_dep/linux/os_intfs.c:615:8: warning: assignment makes pointer from integer without a cast [enabled by default]
  entry = create_proc_read_entry("pid", S_IFREG | S_IRUGO,
        ^
/home/zeno/RTL8188C_8192C_USB_linux_v4.0.2_9000.20130911/driver/rtl8188C_8192C_usb_linux_v4.0.2_9000.20130911/os_dep/linux/os_intfs.c:622:8: warning: assignment makes pointer from integer without a cast [enabled by default]
  entry = create_proc_read_entry("rssi_disp", S_IFREG | S_IRUGO,
        ^
/home/zeno/RTL8188C_8192C_USB_linux_v4.0.2_9000.20130911/driver/rtl8188C_8192C_usb_linux_v4.0.2_9000.20130911/os_dep/linux/os_intfs.c:628:7: error: dereferencing pointer to incomplete type
  entry->write_proc = proc_set_rssi_disp;
       ^
/home/zeno/RTL8188C_8192C_USB_linux_v4.0.2_9000.20130911/driver/rtl8188C_8192C_usb_linux_v4.0.2_9000.20130911/os_dep/linux/os_intfs.c:631:8: warning: assignment makes pointer from integer without a cast [enabled by default]
  entry = create_proc_read_entry("sreset", S_IFREG | S_IRUGO,
        ^
/home/zeno/RTL8188C_8192C_USB_linux_v4.0.2_9000.20130911/driver/rtl8188C_8192C_usb_linux_v4.0.2_9000.20130911/os_dep/linux/os_intfs.c:637:7: error: dereferencing pointer to incomplete type
  entry->write_proc = proc_set_sreset;
       ^
/home/zeno/RTL8188C_8192C_USB_linux_v4.0.2_9000.20130911/driver/rtl8188C_8192C_usb_linux_v4.0.2_9000.20130911/os_dep/linux/os_intfs.c: At top level:
/home/zeno/RTL8188C_8192C_USB_linux_v4.0.2_9000.20130911/driver/rtl8188C_8192C_usb_linux_v4.0.2_9000.20130911/os_dep/linux/os_intfs.c:999:2: warning: initialization from incompatible pointer type [enabled by default]
  .ndo_select_queue = rtw_select_queue,
  ^
/home/zeno/RTL8188C_8192C_USB_linux_v4.0.2_9000.20130911/driver/rtl8188C_8192C_usb_linux_v4.0.2_9000.20130911/os_dep/linux/os_intfs.c:999:2: warning: (near initialization for ârtw_netdev_ops.ndo_select_queueâ) [enabled by default]
cc1: some warnings being treated as errors
make[2]: *** [/home/zeno/RTL8188C_8192C_USB_linux_v4.0.2_9000.20130911/driver/rtl8188C_8192C_usb_linux_v4.0.2_9000.20130911/os_dep/linux/os_intfs.o] Error 1
make[1]: *** [_module_/home/zeno/RTL8188C_8192C_USB_linux_v4.0.2_9000.20130911/driver/rtl8188C_8192C_usb_linux_v4.0.2_9000.20130911] Error 2
make[1]: Leaving directory '/usr/src/linux-headers-3.13.0-32-generic'
make: *** [modules] Error 2
##################################################
Compile make driver error: 2
Please check error Mesg
##################################################

Ou existe um pacote .deb que eu possa encontrar em algum lugar?

    

Answer 1

Eu tenho esse trabalho no Ubuntu 14.04.1 (Kernel 3.13.0-35-generic), que parece ser semelhante ao que você está executando.

Você precisará fazer algumas pequenas modificações nos arquivos de origem do driver. Isso significa que você não pode usar o script install.sh, pois isso sempre descompactará o ZIP do driver e substituirá as alterações feitas por você.

Execute esses comandos como root

Vá para o diretório do driver driver/rtl8188C_8192C_usb_linux_v4.0.2_9000.20130911

# cd driver/rtl8188C_8192C_usb_linux_v4.0.2_9000.20130911

Altere o Makefile e o include/autoconf.h de acordo com os seguintes diffs (essencialmente comente as linhas com EXTRA_CFLAGS / CONFIG_DEBUG_RTL819X / CONFIG_PROC_DEBUG / DBG_CONFIG_ERROR_DETECT )

diff -pru rtl8192cu/Makefile rtl8192cu.new/Makefile
--- rtl8192cu/Makefile  2013-09-11 05:56:55.000000000 +0200
+++ rtl8192cu.new/Makefile      2013-12-06 16:09:37.000000000 +0100
@@ -1,5 +1,5 @@
 EXTRA_CFLAGS += $(USER_EXTRA_CFLAGS)
-EXTRA_CFLAGS += -O1
+#EXTRA_CFLAGS += -O1
 #EXTRA_CFLAGS += -O3
 #EXTRA_CFLAGS += -Wall
 #EXTRA_CFLAGS += -Wextra

e

diff -pru rtl8192cu/include/autoconf.h rtl8192cu.new/include/autoconf.h
--- rtl8192cu/include/autoconf.h        2013-09-11 05:56:55.000000000 +0200
+++ rtl8192cu.new/include/autoconf.h    2013-12-06 16:09:37.000000000 +0100
@@ -296,9 +296,9 @@
 //#define CONFIG_DEBUG_RTL871X

 #define DBG    0
-#define CONFIG_DEBUG_RTL819X
+//#define CONFIG_DEBUG_RTL819X

-#define CONFIG_PROC_DEBUG      1
+//#define CONFIG_PROC_DEBUG    1

 //#define DBG_IO
 //#define DBG_DELAY_OS
@@ -324,7 +324,7 @@

 //#define DBG_MEMORY_LEAK      1

-#define DBG_CONFIG_ERROR_DETECT
+//#define DBG_CONFIG_ERROR_DETECT
 //#define DBG_CONFIG_ERROR_RESET

 //TX use 1 urb

Agora execute:

# make

e

# make install

Isso instalará um módulo chamado 8192cu . Certifique-se de colocar na lista negra os drivers padrão fornecidos com o kernel:

Adicione isto ao /etc/modprobe.d/modprobe.conf (ou crie um arquivo /etc/modprobe.d/blacklist-8192cu.conf)

blacklist rtl8192cu
blacklist rtl8192c_common
blacklist rtlwifi

Tenho esse trabalho graças ao post de guanx aqui .

    

Answer 2

Antes de mais nada, insira seu dongle na porta USB. Agora, espere um pouco (na verdade, apenas 8-10 segundos).

Agora vá até o painel e clique no ícone da rede. Selecione Enable Mobile Broadband e depois disso tudo o que você precisa fazer é selecionar seu parceiro móvel e outras coisas. Se o nome de seus parceiros móveis ou o APN (NOME DO PONTO DE ACESSO) não estiverem disponíveis, será necessário procurar o nome do ponto de acesso do provedor de serviços de rede.

Depois de concluir todas essas etapas, você poderá ver o nome da sua rede no indicador de rede do painel do Ubuntu. E você também deve poder usar seu laptop como um hotspot.

Esse truque não funcionará para receber mensagens do seu provedor de rede. É apenas uma alternativa por enquanto. Você precisará instalar o software da Dongle e para isso você deve seguir as instruções fornecidas no pacote de software do fornecedor (deve haver um arquivo READ ME em algum lugar).