Como reivindicar Ethernet

Question

Ethernet e WiFi estão sendo exibidos como não reivindicados durante a execução

sudo lshw -C network
[sudo] password for gumby: 
*-network UNCLAIMED
    description: Network controller
    product: RTL8188EE Wireless Network Adapter
    vendor: Realtek Semiconductor Co., Ltd.
    physical id: 0
    bus info: pci@0000:02:00.0
    version: 01
    width: 64 bits
    clock: 33MHz
    capabilities: pm msi pciexpress bus_master cap_list
    configuration: latency=0
    resources: ioport:3000(size=256) memory:f0200000-f0203fff
*-network UNCLAIMED
    description: Ethernet controller
    product: RTL8101/2/6E PCI Express Fast/Gigabit Ethernet controller
    vendor: Realtek Semiconductor Co., Ltd.
    physical id: 0
    bus info: pci@0000:05:00.0
    version: 07
    width: 64 bits
    clock: 33MHz
    capabilities: pm msi pciexpress msix vpd bus_master cap_list
    configuration: latency=0
    resources: ioport:2000(size=256) memory:f0004000-f0004fff memory:f0000000-f0003fff memory:f0010000-f001ffff

inicializando na versão anterior

sudo lshw -C network
[sudo] password for gumby:
*-network
    description: Wireless interface
    product: RTL8188EE Wireless Network Adapter
    vendor: Realtek Semiconductor Co., Ltd.
    physical id: 0
    bus info: pci@0000:02:00.0
    logical name: wlo1
    version: 01
    serial: 0c:84:dc:86:d9:70
    width: 64 bits
    clock: 33MHz
    capabilities: pm msi pciexpress bus_master cap_list ethernet physical wireless
    configuration: broadcast=yes driver=rtl8188ee driverversion=4.13.0-19-generic firmware=N/A ip=10.42.0.1 latency=0 link=yes multicast=yes wireless=IEEE 802.11
    resources: irq:33 ioport:3000(size=256) memory:f0200000-f0203fff
*-network
    description: Ethernet interface
    product: RTL8101/2/6E PCI Express Fast/Gigabit Ethernet controller
    vendor: Realtek Semiconductor Co., Ltd.
    physical id: 0
    bus info: pci@0000:05:00.0
    logical name: eno1
    version: 07
    serial: a0:48:1c:0b:29:53
    size: 100Mbit/s
    capacity: 100Mbit/s
    width: 64 bits
    clock: 33MHz
    capabilities: pm msi pciexpress msix vpd bus_master cap_list rom ethernet physical tp mii 10bt 10bt-fd 100bt 100bt-fd autonegotiation
    configuration: autonegotiation=on broadcast=yes driver=r8169 driverversion=2.3LK-NAPI duplex=full firmware=rtl8106e-1_0.0.1 06/29/12 ip=192.168.1.13 latency=0 link=yes multicast=yes port=MII speed=100Mbit/s
    resources: irq:31 ioport:2000(size=256) memory:f0004000-f0004fff memory:f0000000-f0003fff memory:f0010000-f001ffff

    rfkill list all
    0: phy0: Wireless LAN
        Soft blocked: no
        Hard blocked: no

    

Answer 1

Primeiro de tudo, vemos isso:

% bl0ck_qu0te%

O arquivo agora é o seguinte:

% bl0ck_qu0te%

O arquivo foi sobrescrito erroneamente. Deveria ler:

# /etc/modprobe.d/iwlwifi.conf
# iwlwifi will dyamically load either iwldvm or iwlmvm depending on the
# microcode file installed on the system.  When removing iwlwifi, first
# remove the iwl?vm module and then iwlwifi.
remove iwlwifi \
(/sbin/lsmod | grep -o -e ^iwlmvm -e ^iwldvm -e ^iwlwifi | xargs /sbin/rmmod) \
&& /sbin/modprobe -r mac80211
options iwlwifi 11n_disable=1

Por favor, restaure o conteúdo excluído e, em seguida, certifique-se de que o termo é opções com um s.

Em seguida, como você descobriu, quando você inicializa em uma versão anterior do kernel, a ethernet e, suponho, wireless, funciona como esperado. Vamos tentar reinstalar a versão -32.

sudo apt install --reinstall linux-image-4.13.0-32-generic 
sudo apt install --reinstall linux-headers-4.13.0-32-generic

Reinicie. Está tudo funcionando corretamente agora?