Como posso manter meu Dell m3800 de auto-despertador de suspensão?

0

Ubuntu 17.10 Dell m3800

Quando eu executo systemctl suspend meu sistema suspende e desliga com sucesso ... enquanto eu fico conectado. Assim que eu removo minha fonte de energia, o laptop se levanta após cerca de 5 segundos se a tampa está fechada ou não.

Eu tentei muitas correções que outras pessoas postaram aqui sobre suspensão / hibernação, e nenhuma delas ajudou.

Tenho o prazer de fornecer qualquer saída adicional do meu sistema que ajude a resolver isso. Se isso ajudar, aqui está minha saída do dmesg, na qual você pode ver que ela está suspensa por cerca de 4,3 segundos antes que algo a recupere.

[  746.632867] PM: Syncing filesystems ... done.
[  746.673255] PM: Preparing system for sleep (mem)
[  747.000304] Freezing user space processes ... (elapsed 0.002 seconds) done.
[  747.002699] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
[  747.004097] PM: Suspending system (mem)
[  747.004140] Suspending console(s) (use no_console_suspend to debug)
[  747.004512] sd 1:0:0:0: [sda] Synchronizing SCSI cache
[  747.007040] sd 1:0:0:0: [sda] Stopping disk
[  747.076883] ACPI : EC: event blocked
[  747.077198] Removing pn544
[  748.305774] PM: suspend of devices complete after 1301.385 msecs
[  748.322572] PM: late suspend of devices complete after 16.793 msecs
[  748.323063] ACPI : EC: interrupt blocked
[  748.323432] ehci-pci 0000:00:1d.0: System wakeup enabled by ACPI
[  748.323685] ehci-pci 0000:00:1a.0: System wakeup enabled by ACPI
[  748.323795] xhci_hcd 0000:00:14.0: System wakeup enabled by ACPI
[  748.886512] PM: noirq suspend of devices complete after 563.921 msecs
[  748.886812] ACPI: Preparing to enter system sleep state S3
[  748.887504] ACPI : EC: EC stopped
[  748.887504] PM: Saving platform NVS memory
[  748.887606] Disabling non-boot CPUs ...
[  748.888074] Broke affinity for irq 30
[  748.889150] smpboot: CPU 1 is now offline
[  748.903769] Broke affinity for irq 30
[  748.904804] smpboot: CPU 2 is now offline
[  748.927602] Broke affinity for irq 30
[  748.928662] smpboot: CPU 3 is now offline
[  748.947868] Broke affinity for irq 18
[  748.947891] Broke affinity for irq 30
[  748.949650] smpboot: CPU 4 is now offline
[  748.971815] Broke affinity for irq 18
[  748.971835] Broke affinity for irq 29
[  748.971840] Broke affinity for irq 30
[  748.972917] smpboot: CPU 5 is now offline
[  748.995845] Broke affinity for irq 16
[  748.995850] Broke affinity for irq 18
[  748.995859] Broke affinity for irq 23
[  748.995872] Broke affinity for irq 29
[  748.995877] Broke affinity for irq 30
[  748.996945] smpboot: CPU 6 is now offline
[  749.019946] Broke affinity for irq 1
[  749.019953] Broke affinity for irq 8
[  749.019958] Broke affinity for irq 9
[  749.019963] Broke affinity for irq 12
[  749.019969] Broke affinity for irq 16
[  749.019973] Broke affinity for irq 18
[  749.019979] Broke affinity for irq 20
[  749.019984] Broke affinity for irq 23
[  749.019990] Broke affinity for irq 27
[  749.019999] Broke affinity for irq 29
[  749.020004] Broke affinity for irq 30
[  749.021049] smpboot: CPU 7 is now offline
[  749.041131] ACPI: Low-level resume complete
[  749.041185] ACPI : EC: EC started
[  749.041186] PM: Restoring platform NVS memory
[  749.041563] Suspended for 4.368 seconds
[  749.044019] Enabling non-boot CPUs ...
[  749.053104] x86: Booting SMP configuration:
[  749.053105] smpboot: Booting Node 0 Processor 1 APIC 0x2
[  749.053753]  cache: parent cpu1 should not be sleeping
[  749.053899] microcode: sig=0x306c3, pf=0x20, revision=0x17
[  749.055390] CPU1 is up
[  749.065133] smpboot: Booting Node 0 Processor 2 APIC 0x4
[  749.065789]  cache: parent cpu2 should not be sleeping
[  749.067446] CPU2 is up
[  749.081134] smpboot: Booting Node 0 Processor 3 APIC 0x6
[  749.081784]  cache: parent cpu3 should not be sleeping
[  749.083466] CPU3 is up
[  749.105179] smpboot: Booting Node 0 Processor 4 APIC 0x1
[  749.105784]  cache: parent cpu4 should not be sleeping
[  749.105888] microcode: sig=0x306c3, pf=0x20, revision=0x23
[  749.106043] CPU4 is up
[  749.121110] smpboot: Booting Node 0 Processor 5 APIC 0x3
[  749.121645]  cache: parent cpu5 should not be sleeping
[  749.121924] CPU5 is up
[  749.137121] smpboot: Booting Node 0 Processor 6 APIC 0x5
[  749.137667]  cache: parent cpu6 should not be sleeping
[  749.137972] CPU6 is up
[  749.153150] smpboot: Booting Node 0 Processor 7 APIC 0x7
[  749.153695]  cache: parent cpu7 should not be sleeping
[  749.154164] CPU7 is up
[  749.165645] ACPI: Waking up from system sleep state S3
[  749.381369] acpi LNXPOWER:01: Turning OFF
[  749.381571] ACPI : EC: interrupt unblocked
[  749.389190] ehci-pci 0000:00:1d.0: System wakeup disabled by ACPI
[  749.389223] ehci-pci 0000:00:1a.0: System wakeup disabled by ACPI
[  749.389231] xhci_hcd 0000:00:14.0: System wakeup disabled by ACPI
[  749.961034] PM: noirq resume of devices complete after 579.638 msecs
[  749.961520] PM: early resume of devices complete after 0.461 msecs
[  749.961652] ACPI : EC: event unblocked
[  749.961658] usb usb3: root hub lost power or was reset
[  749.961660] usb usb4: root hub lost power or was reset
[  749.962313] sd 1:0:0:0: [sda] Starting disk
[  749.970540] mei_me 0000:00:16.0: NFC MEI VERSION: IVN 0x1 Vendor ID 0x1 Type 0x1
[  750.049038] rtc_cmos 00:02: System wakeup disabled by ACPI
[  750.200942] usb 1-1: reset high-speed USB device number 2 using ehci-pci
[  750.200950] usb 2-1: reset high-speed USB device number 2 using ehci-pci
[  750.275867] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[  750.301351] ata2.00: configured for UDMA/133
[  750.301419] ata2.00: Enabling discard_zeroes_data
[  750.309060] usb 3-6: reset full-speed USB device number 2 using xhci_hcd
[  750.569037] usb 3-9: reset full-speed USB device number 3 using xhci_hcd
[  750.828987] usb 3-11: reset high-speed USB device number 4 using xhci_hcd
[  751.001519] PM: resume of devices complete after 1039.967 msecs
[  751.001576] usb 3-9:1.0: rebind failed: -517
[  751.001579] usb 3-9:1.1: rebind failed: -517
[  751.001859] PM: Finishing wakeup.
[  751.001860] Restarting tasks ... done.
[  751.015405] Probing NFC pn544
[  751.028688] psmouse serio1: synaptics: queried max coordinates: x [..5660], y [..4646]
[  751.083194] psmouse serio1: synaptics: queried min coordinates: x [1386..], y [1252..]
[  751.130884] Bluetooth: hci0: BCM: chip id 63
[  751.146874] Bluetooth: hci0: BCM20702A
[  751.147870] Bluetooth: hci0: BCM20702A1 (001.002.014) build 0000
[  751.147884] bluetooth hci0: Direct firmware load for brcm/BCM20702A1-0a5c-216f.hcd failed with error -2
[  751.147885] Bluetooth: hci0: BCM: Patch brcm/BCM20702A1-0a5c-216f.hcd not found
[  751.247772] IPv6: ADDRCONF(NETDEV_UP): wlp6s0: link is not ready
[  755.573992] ERROR @wl_notify_scan_status : 
[  755.573995] wlp6s0 Scan_results error (-22)
    
por iandouglas 05.02.2018 / 07:06

0 respostas