hey eu sou relativamente novo no linux. Com muita leitura e tentativa e erro, consegui usar o ubuntu budgie x64 no meu lenovo miix 310. (periquito porque já tinha o wi-fi funcionando e eu não tenho uma porta ethernet).
meu problema agora ainda é com o alto-falante externo / fones de ouvido, eles não funcionam de todo. não parece pegá-los quando eu os conecto dentro ou fora. os alto-falantes internos funcionam bem, mas não com muito volume. esse lenovo é um laptop híbrido e tem apenas uma entrada de 1/16 ", nenhuma entrada de microfone ou qualquer outra coisa parecida.
eu tentei
alsactyl restore
que não parece fazer nada:
mick@mick-MIIX-310-10ICR:~$ alsactl restore
alsactl: state_lock:125: file /var/lib/alsa/asound.state lock error: File exists
alsactl: load_state:1683: Cannot open /var/lib/alsa/asound.state for reading: File exists
Found hardware: "HdmiLpeAudio" "" "" "" ""
Hardware is initialized using a generic method
Found hardware: "chtrt5645" "" "" "" ""
Hardware is initialized using a generic method
aqui está minha
pacmd list -sinks
:
mick@mick-MIIX-310-10ICR:~$ pacmd list-sinks
2 sink(s) available.
index: 0
name: <alsa_output.pci-0000_00_02.0-platform-hdmi-lpe-audio.analog-stereo>
driver: <module-alsa-card.c>
flags: HARDWARE DECIBEL_VOLUME LATENCY DYNAMIC_LATENCY
state: SUSPENDED
suspend cause: IDLE
priority: 9059
volume: front-left: 65536 / 100% / 0.00 dB, front-right: 65536 / 100% / 0.00 dB
balance 0.00
base volume: 65536 / 100% / 0.00 dB
volume steps: 65537
muted: no
current latency: 0.00 ms
max request: 0 KiB
max rewind: 0 KiB
monitor source: 0
sample spec: s16le 2ch 44100Hz
channel map: front-left,front-right
Stereo
used by: 0
linked by: 0
configured latency: 0.00 ms; range is 0.50 .. 2000.18 ms
card: 0 <alsa_card.pci-0000_00_02.0-platform-hdmi-lpe-audio>
module: 6
properties:
alsa.resolution_bits = "16"
device.api = "alsa"
device.class = "sound"
alsa.class = "generic"
alsa.subclass = "generic-mix"
alsa.name = "Intel HDMI/DP LPE Audio"
alsa.id = "HdmiLpeAudio"
alsa.subdevice = "0"
alsa.subdevice_name = "subdevice #0"
alsa.device = "0"
alsa.card = "0"
alsa.card_name = "Intel HDMI/DP LPE Audio"
alsa.long_card_name = "Intel HDMI/DP LPE Audio"
alsa.driver_name = "snd_hdmi_lpe_audio"
device.bus_path = "pci-0000:00:02.0-platform-hdmi-lpe-audio"
sysfs.path = "/devices/pci0000:00/0000:00:02.0/hdmi-lpe-audio/sound/card0"
device.bus = "pci"
device.vendor.id = "8086"
device.vendor.name = "Intel Corporation"
device.product.id = "22b0"
device.product.name = "Atom/Celeron/Pentium Processor x5-E8000/J3xxx/N3xxx Series PCI Configuration Registers"
device.string = "hw:0"
device.buffering.buffer_size = "352832"
device.buffering.fragment_size = "352832"
device.access_mode = "mmap+timer"
device.profile.name = "analog-stereo"
device.profile.description = "Analogue Stereo"
device.description = "Atom/Celeron/Pentium Processor x5-E8000/J3xxx/N3xxx Series PCI Configuration Registers Analogue Stereo"
module-udev-detect.discovered = "1"
device.icon_name = "audio-card-pci"
ports:
analog-output: Analogue Output (priority 9900, latency offset 0 usec, available: unknown)
properties:
active port: <analog-output>
* index: 1
name: <alsa_output.platform-cht-bsw-rt5645.HiFi__hw_chtrt5645_0__sink>
driver: <module-alsa-card.c>
flags: HARDWARE DECIBEL_VOLUME LATENCY DYNAMIC_LATENCY
state: IDLE
suspend cause:
priority: 9900
volume: front-left: 99957 / 153% / 11.00 dB, front-right: 99957 / 153% / 11.00 dB
balance 0.00
base volume: 65536 / 100% / 0.00 dB
volume steps: 65537
muted: no
current latency: 1799.06 ms
max request: 375 KiB
max rewind: 375 KiB
monitor source: 1
sample spec: s16le 2ch 48000Hz
channel map: front-left,front-right
Stereo
used by: 0
linked by: 0
configured latency: 2000.00 ms; range is 0.50 .. 2000.00 ms
card: 1 <alsa_card.platform-cht-bsw-rt5645>
module: 7
properties:
alsa.resolution_bits = "16"
device.api = "alsa"
device.class = "sound"
alsa.class = "generic"
alsa.subclass = "generic-mix"
alsa.name = ""
alsa.id = "1"
alsa.subdevice = "0"
alsa.subdevice_name = "subdevice #0"
alsa.device = "0"
alsa.card = "1"
alsa.card_name = "chtrt5645"
alsa.long_card_name = "LENOVO-80SG-MIIX310_10ICR-Cavalli"
alsa.driver_name = "snd_soc_sst_cht_bsw_rt5645"
device.bus_path = "platform-cht-bsw-rt5645"
sysfs.path = "/devices/pci0000:00/808622A8:00/cht-bsw-rt5645/sound/card1"
device.form_factor = "internal"
device.string = "hw:chtrt5645,0"
device.buffering.buffer_size = "384000"
device.buffering.fragment_size = "192000"
device.access_mode = "mmap+timer"
device.profile.name = "HiFi: hw:chtrt5645,0: sink"
device.profile.description = "Headphones + Speaker"
device.description = "Built-in Audio Headphones + Speaker"
module-udev-detect.discovered = "1"
device.icon_name = "audio-card"
ports:
[Out] Headphone: Headphones (priority 100, latency offset 0 usec, available: no)
properties:
[Out] Speaker: Speaker (priority 100, latency offset 0 usec, available: unknown)
properties:
active port: <[Out] Speaker>
quando eu instalei inicialmente o ubuntu budgie os alto-falantes internos funcionavam mas depois de algumas atualizações diferentes, installaions etc, ele parou de detectá-lo, por alguma chance aleatória eu consertei isso, eu acho que foi esse comando que corrigiu isso:
sudo pacmd set-card-profile 0 output:analog-stereo
para ser completamente honesto, eu realmente não sei o que estou fazendo aqui, foi tudo sobre este fórum e um tipo de tentativa e erro ...
qualquer ajuda seria muito apreciada.
eu pensei que deveria adicionar isso também tela do comando do terminal após digitar o comando "alsamixer", primeira placa de som selecionada
e este alsamixer selecionado no segundo cartão selecionado com fones de ouvido em completo - ainda sem som
