Não é possível conectar-se à ethernet em um Ubuntu recém-instalado 16.04

0

Eu sou novo no Linux. Eu instalei recentemente o Ubuntu 16.04LTS no meu laptop HP, mas não consegui conectar a uma conexão ethernet. Verifiquei minhas configurações de proxy no navegador do moxilla e também no "proxy de rede" do meu computador. Mas ainda assim a mensagem de erro aparece "O servidor proxy está recusando conexões". Eu posso conectar-me à internet através do meu celular android com bastante facilidade. Alguém por favor pode me ajudar a sair deste problema como eu tenho tentado fazer isso desde duas semanas agora.  A saída dos comandos é a seguinte:

ifconfig
enp2s0    Link encap:Ethernet  HWaddr 48:0f:cf:d8:c0:5f  
          UP BROADCAST MULTICAST  MTU:1500  Metric:1
          RX packets:0 errors:0 dropped:0 overruns:0 frame:0
          TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000 
          RX bytes:0 (0.0 B)  TX bytes:0 (0.0 B)

lo        Link encap:Local Loopback  
          inet addr:127.0.0.1  Mask:255.0.0.0
          inet6 addr: ::1/128 Scope:Host
          UP LOOPBACK RUNNING  MTU:65536  Metric:1
          RX packets:500 errors:0 dropped:0 overruns:0 frame:0
          TX packets:500 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000 
          RX bytes:37216 (37.2 KB)  TX bytes:37216 (37.2 KB)

..

lshw -C network
  *-network               
       description: Ethernet interface
       product: RTL8101/2/6E PCI Express Fast/Gigabit Ethernet controller
       vendor: Realtek Semiconductor Co., Ltd.
       physical id: 0
       bus info: pci@0000:02:00.0
       logical name: enp2s0
       version: 07
       serial: 48:0f:cf:d8:c0:5f
       size: 10Mbit/s
       capacity: 100Mbit/s
       width: 64 bits
       clock: 33MHz
       capabilities: bus_master cap_list ethernet physical tp mii 10bt 10bt-fd 100bt 100bt-fd autonegotiation
       configuration: autonegotiation=on broadcast=yes driver=r8169 driverversion=2.3LK-NAPI duplex=half firmware=rtl8106e-1_0.0.1 06/29/12 latency=0 link=no multicast=yes port=MII speed=10Mbit/s
       resources: irq:43 ioport:4000(size=256) memory:d1300000-d1300fff memory:d1000000-d1003fff
  *-network DISABLED
       description: Wireless interface
       product: BCM43142 802.11b/g/n
       vendor: Broadcom Corporation
       physical id: 0
       bus info: pci@0000:04:00.0
       logical name: wlp4s0
       version: 01
       serial: 74:29:af:fb:1b:b5
       width: 64 bits
       clock: 33MHz
       capabilities: bus_master cap_list ethernet physical wireless
       configuration: broadcast=yes driver=wl0 driverversion=6.30.223.271 (r587334) latency=0 multicast=yes wireless=IEEE 802.11
   resources: irq:16 memory:d1100000-d1107fff

..

lspci -nnk 

<snip>
02:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8101/2/6E PCI Express Fast/Gigabit Ethernet controller [10ec:8136] (rev 07)
    Subsystem: Hewlett-Packard Company RTL8101/2/6E PCI Express Fast/Gigabit Ethernet controller [103c:80c2]
    Kernel driver in use: r8169
    Kernel modules: r8169

04:00.0 Network controller [0280]: Broadcom Corporation BCM43142 802.11b/g/n [14e4:4365] (rev 01)
    Subsystem: Hewlett-Packard Company BCM43142 802.11b/g/n [103c:804a]
    Kernel driver in use: wl
    Kernel modules: wl
    
por Jyotirmoi Borah 19.01.2018 / 21:48

0 respostas