Eu tenho um computador com uma conexão LAN de 1000 MBit, que funciona no Windows. No entanto, o Ubuntu só configura uma conexão de 100 MBit. Como posso forçá-lo manualmente a 1000 MBit?
Eu tentei usar ethtool , mas isso não funcionou ("Operação não suportada"). Qualquer outra coisa que eu possa tentar?
$ sudo ethtool -s enp6s0 speed 1000 duplex full autoneg off
Cannot set new settings: Operation not supported
not setting speed
not setting duplex
not setting autoneg
$ sudo ethtool enp6s0
Settings for enp6s0:
Supported ports: [ TP MII ]
Supported link modes: 10baseT/Half 10baseT/Full
100baseT/Half 100baseT/Full
1000baseT/Half 1000baseT/Full
Supported pause frame use: No
Supports auto-negotiation: Yes
Advertised link modes: 10baseT/Half 10baseT/Full
100baseT/Half 100baseT/Full
1000baseT/Half 1000baseT/Full
Advertised pause frame use: Symmetric Receive-only
Advertised auto-negotiation: Yes
Link partner advertised link modes: 10baseT/Half 10baseT/Full
100baseT/Half 100baseT/Full
Link partner advertised pause frame use: Symmetric Receive-only
Link partner advertised auto-negotiation: Yes
Speed: 100Mb/s
Duplex: Full
Port: MII
PHYAD: 0
Transceiver: internal
Auto-negotiation: on
Supports Wake-on: pumbg
Wake-on: g
Current message level: 0x00000033 (51)
drv probe ifdown ifup
Link detected: yes