Eu executei uma instalação de nó único em um servidor LTS do Ubuntu 16.04 usando conjure-up ( link ) . A instalação foi concluída com êxito.Eu posso acessar o painel do horizonte depois de fazer o encaminhamento de porta.
A versão openstack instalada é a 2.3.1-Mitaka
Eu usei o contêiner lxd para implantar a openstack em (lxd-init). O nome da ponte é lxdbr0.
lxdbr0 Link encap:Ethernet HWaddr fe:29:3f:95:33:74
inet addr:10.150.23.1 Bcast:0.0.0.0 Mask:255.255.255.0
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:5979473 errors:0 dropped:0 overruns:0 frame:0
TX packets:7665921 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:1902164036 (1.9 GB) TX bytes:87174216616 (87.1 GB)
A interface física principal no servidor no qual a instalação é feita é eno1
eno1 Link encap:Ethernet HWaddr bc:30:5b:ee:57:bc
inet addr:10.x.x.39 Bcast:10.221.31.255 Mask:255.255.255.0
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:71774809 errors:0 dropped:0 overruns:0 frame:0
TX packets:27467361 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:82425733947 (82.4 GB) TX bytes:13855543051 (13.8 GB)
Memory:dcb00000-dcbfffff
Configurei a rede seguindo as instruções fornecidas neste vídeo link e aqui
Eu iniciei uma instância de exemplo usando o painel, mas não consegui enviar ping / ssh para ele do servidor (fora do mundo) ou vice-versa.
A instância tem Ips particulares e Ips flutuantes alocados. A rede externa é uma rede FLAT com o nome da rede física, conforme definido no arquivo ml2 conf ini no nó neutrron-api / 0 .
Eu sou novo no Openstack e Networking, então, na maioria das vezes, faltam algumas etapas para estabelecer essa conexão da instância vm com o mundo externo.
Eu realmente aprecio se alguém puder me ajudar nisso, ficar preso a isso e ficar frustrante. Tudo o que quero é conseguir que essa instância seja acessada de fora.
As diferentes unidades de openstack / serviços como nêutron, nova, glance, etc. têm seus IPs alocados como 10.150.23.x e estão todos ativos.
lg@si-rd10-39:~$ sudo juju status
Model Controller Cloud/Region Version
conjure-openstack-novalx-937 conjure-up-localhost-88c localhost/localhost 2.2.6
App Version Status Scale Charm Store Rev OS Notes
ceph-mon 12.2.0 active 3 ceph-mon jujucharms 13 ubuntu
ceph-osd 12.2.0 active 3 ceph-osd jujucharms 249 ubuntu
ceph-radosgw 12.2.0 active 1 ceph-radosgw jujucharms 252 ubuntu
glance 15.0.0 active 1 glance jujucharms 259 ubuntu
keystone 12.0.0 active 1 keystone jujucharms 271 ubuntu
lxd 2.0.10 active 1 lxd jujucharms 13 ubuntu
mysql 5.6.34-26.19 active 1 percona-cluster jujucharms 255 ubuntu
neutron-api 11.0.1 active 1 neutron-api jujucharms 253 ubuntu
neutron-gateway 11.0.1 active 1 neutron-gateway jujucharms 241 ubuntu
neutron-openvswitch 11.0.1 active 1 neutron-openvswitch jujucharms 244 ubuntu
nova-cloud-controller 16.0.1 active 1 nova-cloud-controller jujucharms 301 ubuntu
nova-compute 16.0.1 active 1 nova-compute jujucharms 274 ubuntu
ntp waiting 0 ntp jujucharms 18 ubuntu
openstack-dashboard 12.0.0 active 1 openstack-dashboard jujucharms 251 ubuntu exposed
rabbitmq-server 3.5.7 active 1 rabbitmq-server jujucharms 68 ubuntu
Unit Workload Agent Machine Public address Ports Message
ceph-mon/0* active idle 1 10.150.23.194 Unit is ready and clustered
ceph-mon/1 active idle 10 10.150.23.173 Unit is ready and clustered
ceph-mon/2 active idle 11 10.150.23.108 Unit is ready and clustered
ceph-osd/0 active idle 14 10.150.23.7 Unit is ready (1 OSD)
ceph-osd/1 active idle 15 10.150.23.70 Unit is ready (1 OSD)
ceph-osd/2* active idle 2 10.150.23.213 Unit is ready (1 OSD)
ceph-radosgw/0* active idle 13 10.150.23.34 80/tcp Unit is ready
glance/0* active idle 3 10.150.23.63 9292/tcp Unit is ready
keystone/0* active idle 7 10.150.23.209 5000/tcp Unit is ready
mysql/0* active idle 0 10.150.23.32 3306/tcp Unit is ready
neutron-api/0* active idle 8 10.150.23.25 9696/tcp Unit is ready
neutron-gateway/0* active idle 4 10.150.23.155 Unit is ready
nova-cloud-controller/0* active idle 9 10.150.23.221 8774/tcp,8778/tcp Unit is ready
nova-compute/0* active idle 6 10.150.23.5 Unit is ready
lxd/0* active idle 10.150.23.5 Unit is ready
neutron-openvswitch/0* active idle 10.150.23.5 Unit is ready
openstack-dashboard/0* active idle 5 10.150.23.144 80/tcp,443/tcp Unit is ready
rabbitmq-server/0* active idle 12 10.150.23.186 5672/tcp Unit is ready
Machine State DNS Inst id Series AZ
0 started 10.150.23.32 juju-76629f-0 xenial
1 started 10.150.23.194 juju-76629f-1 xenial
2 started 10.150.23.213 juju-76629f-2 xenial
3 started 10.150.23.63 juju-76629f-3 xenial
4 started 10.150.23.155 juju-76629f-4 xenial
5 started 10.150.23.144 juju-76629f-5 xenial
6 started 10.150.23.5 juju-76629f-6 xenial
7 started 10.150.23.209 juju-76629f-7 xenial
8 started 10.150.23.25 juju-76629f-8 xenial
9 started 10.150.23.221 juju-76629f-9 xenial
10 started 10.150.23.173 juju-76629f-10 xenial
11 started 10.150.23.108 juju-76629f-11 xenial
12 started 10.150.23.186 juju-76629f-12 xenial
13 started 10.150.23.34 juju-76629f-13 xenial
14 started 10.150.23.7 juju-76629f-14 xenial
15 started 10.150.23.70 juju-76629f-15 xenial
O IP privado da instância é 192.168.100.10
IP externo / flutuante é 10.x.x.71
o IP do gateway externo é 10.x.x.1
O IP do roteador é 10.x.x.73
A instância também tem as regras do grupo de segurança definidas abaixo
ALLOW IPv4 icmp from 0.0.0.0/0
ALLOW IPv4 icmp to 0.0.0.0/0
ALLOW IPv4 1-65535/tcp to 0.0.0.0/0
ALLOW IPv4 1-65535/tcp from 0.0.0.0/0
no nó nódulo-gateway / 0
vi /etc/neutron/plugins/ml2/openvswitch_agent.ini
# mitaka
###############################################################################
# [ WARNING ]
# Configuration file maintained by Juju. Local changes may be overwritten.
###############################################################################
[ovs]
enable_tunneling = True
local_ip = 10.150.23.155
bridge_mappings = physnet1:br-ex
[agent]
tunnel_types = gre,vxlan
l2_population = True
enable_distributed_routing = False
[securitygroup]
firewall_driver = neutron.agent.linux.iptables_firewall.OVSHybridIptablesFirewallDriver
no nó nêutron-api / 0
vi /etc/neutron/plugins/ml2/ml2_conf.ini
# mitaka
###############################################################################
# [ WARNING ]
# Configuration file maintained by Juju. Local changes may be overwritten.
###############################################################################
[ml2]
type_drivers = gre,vxlan,vlan,flat,local
tenant_network_types = gre,vxlan,vlan,flat,local
mechanism_drivers = openvswitch,hyperv,l2population
path_mtu = 1500
[ml2_type_gre]
tunnel_id_ranges = 1:1000
[ml2_type_vxlan]
vni_ranges = 1001:2000
[ml2_type_vlan]
network_vlan_ranges = physnet1:1000:2000
[ml2_type_flat]
flat_networks = physnet1
[ovs]
enable_tunneling = True
local_ip = 10.150.23.25
[agent]
tunnel_types = gre,vxlan
[securitygroup]
enable_security_group = True
firewall_driver = neutron.agent.linux.iptables_firewall.OVSHybridIptablesFirewallDriver
Se houver algum comando que você queira executar, indique em qual nó como nêutron-api / 0 ou nêutron-gateway / 0, nova-compute / 0 etc ...
Além disso, eu vi quando eu tento modificar certos arquivos como o arquivo ml2 conf, há um aviso
# mitaka
###############################################################################
# [ WARNING ]
# Configuration file maintained by Juju. Local changes may be overwritten.
###############################################################################
Existe uma maneira de fazer as alterações persistirem em tais arquivos?
Agradecemos antecipadamente pelo seu tempo!