Este erro pode ser resolvido?

Question

Ter problemas para inicializar como bios e formatar meu disco rígido como MBR (mesmo o GPT não está funcionando) aqui está uma captura de tela para mais detalhes

equandoeucorrismartctl-a/dev/sdaEureceboaseguintesaída

===STARTOFINFORMATIONSECTION===ModelFamily:SeagateSamsungSpinPointM8(AF)DeviceModel:ST750LM022HN-M750MBBSerialNumber:S2RRJ9BD306196LUWWNDeviceId:50004cf209eebf94FirmwareVersion:2AR10002UserCapacity:750,156,374,016bytes[750GB]SectorSizes:512byteslogical,4096bytesphysicalRotationRate:5400rpmFormFactor:2.5inchesDeviceis:Insmartctldatabase[fordetailsuse:-Pshow]ATAVersionis:ATA8-ACST13/1699-Drevision6SATAVersionis:SATA3.0,3.0Gb/s(current:3.0Gb/s)LocalTimeis:MonOct219:34:452017EETSMARTsupportis:Available-devicehasSMARTcapability.SMARTsupportis:Enabled===STARTOFREADSMARTDATASECTION===SMARToverall-healthself-assessmenttestresult:PASSEDGeneralSMARTValues:Offlinedatacollectionstatus:(0x00)Offlinedatacollectionactivitywasneverstarted.AutoOfflineDataCollection:Disabled.Self-testexecutionstatus:(121)Thepreviousself-testcompletedhavingthereadelementofthetestfailed.TotaltimetocompleteOfflinedatacollection:(10140)seconds.Offlinedatacollectioncapabilities:(0x5b)SMARTexecuteOfflineimmediate.AutoOfflinedatacollectionon/offsupport.SuspendOfflinecollectionuponnewcommand.Offlinesurfacescansupported.Self-testsupported.NoConveyanceSelf-testsupported.SelectiveSelf-testsupported.SMARTcapabilities:(0x0003)SavesSMARTdatabeforeenteringpower-savingmode.SupportsSMARTautosavetimer.Errorloggingcapability:(0x01)Errorloggingsupported.GeneralPurposeLoggingsupported.Shortself-testroutinerecommendedpollingtime:(2)minutes.Extendedself-testroutinerecommendedpollingtime:(169)minutes.SCTcapabilities:(0x003f)SCTStatussupported.SCTErrorRecoveryControlsupported.SCTFeatureControlsupported.SCTDataTablesupported.SMARTAttributesDataStructurerevisionnumber:16VendorSpecificSMARTAttributeswithThresholds:ID#ATTRIBUTE_NAMEFLAGVALUEWORSTTHRESHTYPEUPDATEDWHEN_FAILEDRAW_VALUE1Raw_Read_Error_Rate0x002f100100051Pre-failAlways-280102Throughput_Performance0x0026252252000Old_ageAlways-03Spin_Up_Time0x0023089059025Pre-failAlways-34634Start_Stop_Count0x0032097097000Old_ageAlways-37805Reallocated_Sector_Ct0x0033252252010Pre-failAlways-07Seek_Error_Rate0x002e252252051Old_ageAlways-08Seek_Time_Performance0x0024252252015Old_ageOffline-09Power_On_Hours0x0032100100000Old_ageAlways-1263010Spin_Retry_Count0x0032252252051Old_ageAlways-011Calibration_Retry_Count0x0032100100000Old_ageAlways-26012Power_Cycle_Count0x0032097097000Old_ageAlways-3356191G-Sense_Error_Rate0x0022100100000Old_ageAlways-804192Power-Off_Retract_Count0x0022252252000Old_ageAlways-0194Temperature_Celsius0x0002060041000Old_ageAlways-40(Min/Max15/59)195Hardware_ECC_Recovered0x003a100100000Old_ageAlways-0196Reallocated_Event_Count0x0032252252000Old_ageAlways-0197Current_Pending_Sector0x0032100099000Old_ageAlways-3198Offline_Uncorrectable0x0030252252000Old_ageOffline-0199UDMA_CRC_Error_Count0x0036098098000Old_ageAlways-1404200Multi_Zone_Error_Rate0x002a100100000Old_ageAlways-2133223Load_Retry_Count0x0032100100000Old_ageAlways-260225Load_Cycle_Count0x0032088088000Old_ageAlways-128226SMARTErrorLogVersion:1ATAErrorCount:277(devicelogcontainsonlythemostrecentfiveerrors)CR=CommandRegister[HEX]FR=FeaturesRegister[HEX]SC=SectorCountRegister[HEX]SN=SectorNumberRegister[HEX]CL=CylinderLowRegister[HEX]CH=CylinderHighRegister[HEX]DH=Device/HeadRegister[HEX]DC=DeviceCommandRegister[HEX]ER=Errorregister[HEX]ST=Statusregister[HEX]Powered_Up_Timeismeasuredfrompoweron,andprintedasDDd+hh:mm:SS.ssswhereDD=days,hh=hours,mm=minutes,SS=sec,andsss=millisec.It"wraps" after 49.710 days.

Error 277 occurred at disk power-on lifetime: 12509 hours (521 days + 5 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  84 51 00 00 4f c2 a0  Error: ABRT

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  b0 d0 00 00 4f c2 a0 00      00:00:00.008  SMART READ DATA
  b0 d0 00 00 4f c2 a0 00      00:00:00.008  SMART READ DATA
  b0 d8 00 00 4f c2 a0 00      00:00:00.008  SMART ENABLE OPERATIONS
  f8 00 00 00 00 00 e0 00      00:00:00.008  READ NATIVE MAX ADDRESS [OBS-ACS-3]
  ec 00 00 00 00 00 a0 00      00:00:00.006  IDENTIFY DEVICE

Error 276 occurred at disk power-on lifetime: 12509 hours (521 days + 5 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  84 51 00 00 00 00 a0

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  ec 00 00 00 00 00 a0 00      00:00:00.006  IDENTIFY DEVICE

Error 275 occurred at disk power-on lifetime: 12509 hours (521 days + 5 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  84 51 00 00 4f c2 a0  Error: ABRT

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  b0 d1 00 00 4f c2 a0 00      00:00:00.018  SMART READ ATTRIBUTE THRESHOLDS [OBS-4]
  b0 d0 00 00 4f c2 a0 00      00:00:00.018  SMART READ DATA
  b0 d8 00 00 4f c2 a0 00      00:00:00.018  SMART ENABLE OPERATIONS
  27 00 00 00 00 00 e0 00      00:00:00.018  READ NATIVE MAX ADDRESS EXT [OBS-ACS-3]
  ec 00 00 00 00 00 a0 00      00:00:00.015  IDENTIFY DEVICE

Error 274 occurred at disk power-on lifetime: 12291 hours (512 days + 3 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  40 51 08 20 a7 58 ed  Error: UNC 8 sectors at LBA = 0x0d58a720 = 223913760

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  c8 00 08 20 a7 58 ed 00      00:00:54.028  READ DMA
  ca 00 08 70 21 46 e9 00      00:00:54.028  WRITE DMA
  ea 00 00 00 00 00 e0 00      00:00:54.028  FLUSH CACHE EXT
  ca 00 38 38 21 46 e9 00      00:00:54.028  WRITE DMA
  ef 10 02 00 00 00 a0 00      00:00:54.028  SET FEATURES [Enable SATA feature]

Error 273 occurred at disk power-on lifetime: 12291 hours (512 days + 3 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  40 51 08 20 a7 58 ed  Error: UNC 8 sectors at LBA = 0x0d58a720 = 223913760

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  c8 00 08 20 a7 58 ed 00      00:00:54.026  READ DMA
  c8 00 08 18 a7 58 ed 00      00:00:54.026  READ DMA
  c8 00 08 10 a7 58 ed 00      00:00:54.026  READ DMA
  c8 00 08 08 a7 58 ed 00      00:00:54.026  READ DMA
  c8 00 08 00 a7 58 ed 00      00:00:54.026  READ DMA

SMART Self-test log structure revision number 1
Num  Test_Description    Status                  Remaining  LifeTime(hours)  LBA_of_first_error
# 1  Short offline       Completed: read failure       90%     12630         1465144320
# 2  Extended offline    Aborted by host               60%     12630         -
# 3  Short offline       Completed: read failure       90%     12629         1465144320
# 4  Extended offline    Aborted by host               90%     12629         -
# 5  Short offline       Completed: read failure       90%     12628         1465144320
# 6  Extended offline    Aborted by host               90%     12628         -
# 7  Short offline       Completed: read failure       90%     12628         1465144320
# 8  Short offline       Completed: read failure       90%     12628         1465144320
# 9  Extended offline    Interrupted (host reset)      90%     12510         -
#10  Short offline       Completed: read failure       90%     12510         1465144320
#11  Extended offline    Aborted by host               70%     12484         -
#12  Short offline       Completed: read failure       90%     12483         1139114040
#13  Extended offline    Aborted by host               90%     12384         -
#14  Short offline       Completed: read failure       90%     12384         1465147904
#15  Short offline       Completed: read failure       90%     12384         1465147904
#16  Short offline       Completed: read failure       90%     12381         310080928
#17  Short offline       Completed: read failure       90%     12381         310080928

SMART Selective self-test log data structure revision number 0
Note: revision number not 1 implies that no selective self-test has ever been run
 SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS
    1        0        0  Completed_read_failure [90% left] (0-65535)
    2        0        0  Not_testing
    3        0        0  Not_testing
    4        0        0  Not_testing
    5        0        0  Not_testing
Selective self-test flags (0x0):
  After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute 
delay.

Eu também recebo o mesmo erro que em esta questão na inicialização

alguém pode ajudar? não consegue encontrar nenhuma solução em lugar algum

    

Answer 1

O disco rígido estava falhando, como dito nos comentários acima