Como pode ignorar o tempo de inicialização no servidor Ubuntu 14.04?

Question

Instalei o servidor Ubuntu 14.04 no oracle VirtualBox Mas, quando eu inicio o servidor Ubuntu, são necessários 5,15 minutos de cada vez. Como posso superar isso? para simplificar, clique neste link para ver a foto

saída de cat / etc / network / interfaces

root@ubuntu:~# cat /etc/network/interfaces

# This file describes the network interfaces available on your system
# and how to activate them. For more information, see interfaces(5).

source /etc/network/interfaces.d/*

# The loopback network interface
auto lo
iface lo inet loopback

# The primary network interface
auto enp0s3
iface enp0s3 inet dhcp
#Myadded configuretion
auto enp0s8
iface enp0s8 inet dhcp

saída de ip addr

1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group default qlen 1
    link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
    inet 127.0.0.1/8 scope host lo
       valid_lft forever preferred_lft forever
    inet6 ::1/128 scope host 
       valid_lft forever preferred_lft forever
2: enp0s3: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP group default qlen 1000
    link/ether 08:00:27:19:bc:70 brd ff:ff:ff:ff:ff:ff
    inet 192.168.100.5/24 brd 192.168.100.255 scope global enp0s3
       valid_lft forever preferred_lft forever
    inet6 fe80::a00:27ff:fe19:bc70/64 scope link 
       valid_lft forever preferred_lft forever
3: enp0s8: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP group default qlen 1000
    link/ether 08:00:27:34:05:2b brd ff:ff:ff:ff:ff:ff
    inet6 fe80::a00:27ff:fe34:52b/64 scope link 
       valid_lft forever preferred_lft forever

    

Answer 1

Qualquer uma das interfaces acima, enp0s3 ou enp0s8 , não obtém um endereço por meio do dhcp. Qual é a saída de ip addr ?

enp0s8 é o culpado. Apenas comente as entradas e você está pronto:

#auto enp0s8
#iface enp0s8 inet dhcp