Eu passei por este tutorial, Instalando os drivers Broadcom Wireless e ainda não consigo ver nenhuma das minhas opções de rede sem fio. Estou na placa wireless Broadcom [14e4: 432b] (rev 01). Quando eu verificar drivers adicionais, eu tenho o "Usando Broadcom 802.11 Linux fonte de driver sem fio STA de bcwml-kernel-source" selecionado. Eu tentei atualizar meus pacotes e PCI.IDs, removendo e reinstalando meu driver bcwml-kernel-source e reinicializando, o que mais eu tenho que tentar?
Isso é muito frustrante, eu só quero usar a Internet ... Eu estou em um Macbook Pro7.1 Versão 1.0. Resultados do lshw:
sudo lshw -C network
*-network
description: Wireless interface
product: BCM4322 802.11a/b/g/n Wireless LAN Controller
vendor: Broadcom Limited
physical id: 0
bus info: pci@0000:02:00.0
logical name: wlp2s0
version: 01
serial: 8c:7b:9d:d6:46:3d
width: 64 bits
clock: 33MHz
capabilities: pm msi pciexpress bus_master cap_list ethernet physical wireless
configuration: broadcast=yes driver=wl0 driverversion=6.30.223.271 (r587334) latency=0 multicast=yes wireless=IEEE 802.11abg
resources: irq:21 memory:d3200000-d3203fff
*-network
description: Ethernet interface
product: NetXtreme BCM5764M Gigabit Ethernet PCIe
vendor: Broadcom Limited
physical id: 0
bus info: pci@0000:03:00.0
logical name: enp3s0
version: 10
serial: 10:9a:dd:5b:e7:cd
size: 1Gbit/s
capacity: 1Gbit/s
width: 64 bits
clock: 33MHz
capabilities: pm vpd msi pciexpress bus_master cap_list ethernet physical tp 10bt 10bt-fd 100bt 100bt-fd 1000bt 1000bt-fd autonegotiation
configuration: autonegotiation=on broadcast=yes driver=tg3 driverversion=3.137 duplex=full firmware=5764m-v3.38 ip=192.168.0.5 latency=0 link=yes multicast=yes port=twisted pair speed=1Gbit/s
resources: irq:27 memory:d3100000-d310ffff