Ubuntu 16.04 suporte ao USB 3.0 UAS

Question

Estou recebendo a seguinte mensagem de falha de um compartimento do disco HDY do ICY DOCK :

USB controller 0000:04:00.0 does not support streams, which are required by the UAS driver.

Supostamente, o kernel 4.4 suporta UAS & UASP então o que está acontecendo?

Saída de dmesg |grep usb

[ 3554.004547] usb 7-2: reset SuperSpeed USB device number 9 using xhci_hcd
[ 3554.020553] usb 7-2: device firmware changed
[ 3554.020754] usb 7-2: USB disconnect, device number 9
[ 3554.700361] usb 7-2: new SuperSpeed USB device number 10 using xhci_hcd
[ 3554.716781] usb 7-2: New USB device found, idVendor=152d, idProduct=0562
[ 3554.716793] usb 7-2: New USB device strings: Mfr=1, Product=2, SerialNumber=5
[ 3554.716803] usb 7-2: Product: JMS56x Series
[ 3554.716812] usb 7-2: Manufacturer: JMicron
[ 3554.716820] usb 7-2: SerialNumber: RANDOM__E3F4917AD758
[ 3554.717863] usb 7-2: USB controller 0000:04:00.0 does not support streams, which are required by the UAS driver.
[ 3554.717873] usb 7-2: Please try an other USB controller if you wish to use UAS.
[ 3554.717883] usb-storage 7-2:1.0: USB Mass Storage device detected
[ 3554.724157] scsi host10: usb-storage 7-2:1.0
[49029.464801] usb 7-3: new SuperSpeed USB device number 11 using xhci_hcd
[49029.480769] usb 7-3: New USB device found, idVendor=174c, idProduct=55aa
[49029.480782] usb 7-3: New USB device strings: Mfr=2, Product=3, SerialNumber=1
[49029.480791] usb 7-3: Product: ASMT1051
[49029.480800] usb 7-3: Manufacturer: asmedia
[49029.480808] usb 7-3: SerialNumber: 123456789012
[49029.481716] usb-storage 7-3:1.0: USB Mass Storage device detected
[49029.481907] usb-storage 7-3:1.0: Quirks match for vid 174c pid 55aa: 400000
[49029.481967] scsi host11: usb-storage 7-3:1.0

Saída de uname -a

Linux media 4.4.0-57-generic #78-Ubuntu SMP Fri Dec 9 23:50:32 UTC 2016 x86_64 x86_64 x86_64 GNU/Linux

Saída de lsusb

Bus 001 Device 006: ID 0a81:0205 Chesen Electronics Corp. PS/2 Keyboard+Mouse Adapter
Bus 001 Device 005: ID 0557:8021 ATEN International Co., Ltd CS1764A [CubiQ DVI KVMP Switch]
Bus 001 Device 002: ID 0409:005a NEC Corp. HighSpeed Hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 005 Device 002: ID 0cf3:3005 Atheros Communications, Inc. AR3011 Bluetooth
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 007 Device 011: ID 174c:55aa ASMedia Technology Inc. ASM1051E SATA 6Gb/s bridge, ASM1053E SATA 6Gb/s bridge, ASM1153 SATA 3Gb/s bridge
Bus 007 Device 010: ID 152d:0562 JMicron Technology Corp. / JMicron USA Technology Corp. 
Bus 007 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 006 Device 002: ID 2109:0811 VIA Labs, Inc. Hub
Bus 006 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub

Saída de lspci -vvv

...
04:00.0 USB controller: VIA Technologies, Inc. VL80x xHCI USB 3.0 Controller (rev 02) (prog-if 30 [XHCI])
    Subsystem: VIA Technologies, Inc. VL80x xHCI USB 3.0 Controller
    Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
    Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx+
    Latency: 0, Cache Line Size: 32 bytes
    Interrupt: pin A routed to IRQ 33
    Region 0: Memory at febff000 (32-bit, non-prefetchable) [size=4K]
    Capabilities: <access denied>
    Kernel driver in use: xhci_hcd

Saída de lsusb -t

/:  Bus 07.Port 1: Dev 1, Class=root_hub, Driver=xhci_hcd/4p, 5000M
    |__ Port 2: Dev 10, If 0, Class=Mass Storage, Driver=usb-storage, 5000M
    |__ Port 3: Dev 11, If 0, Class=Mass Storage, Driver=usb-storage, 5000M
/:  Bus 06.Port 1: Dev 1, Class=root_hub, Driver=xhci_hcd/1p, 480M
    |__ Port 1: Dev 2, If 0, Class=Hub, Driver=hub/4p, 480M
/:  Bus 05.Port 1: Dev 1, Class=root_hub, Driver=uhci_hcd/2p, 12M
    |__ Port 1: Dev 2, If 0, Class=Wireless, Driver=btusb, 12M
    |__ Port 1: Dev 2, If 1, Class=Wireless, Driver=btusb, 12M
/:  Bus 04.Port 1: Dev 1, Class=root_hub, Driver=uhci_hcd/2p, 12M
/:  Bus 03.Port 1: Dev 1, Class=root_hub, Driver=uhci_hcd/2p, 12M
/:  Bus 02.Port 1: Dev 1, Class=root_hub, Driver=uhci_hcd/2p, 12M
/:  Bus 01.Port 1: Dev 1, Class=root_hub, Driver=ehci-pci/8p, 480M
    |__ Port 5: Dev 2, If 0, Class=Hub, Driver=hub/4p, 480M
        |__ Port 4: Dev 5, If 0, Class=Hub, Driver=hub/4p, 12M
            |__ Port 1: Dev 6, If 0, Class=Human Interface Device, Driver=usbhid, 1.5M
            |__ Port 1: Dev 6, If 1, Class=Human Interface Device, Driver=usbhid, 1.5M
            |__ Port 1: Dev 6, If 2, Class=Human Interface Device, Driver=usbhid, 1.5M

Saída de usb-devices

...
T:  Bus=07 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#=  1 Spd=5000 MxCh= 4
D:  Ver= 3.00 Cls=09(hub  ) Sub=00 Prot=03 MxPS= 9 #Cfgs=  1
P:  Vendor=1d6b ProdID=0003 Rev=04.04
S:  Manufacturer=Linux 4.4.0-57-generic xhci-hcd
S:  Product=xHCI Host Controller
S:  SerialNumber=0000:04:00.0
C:  #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr=0mA
I:  If#= 0 Alt= 0 #EPs= 1 Cls=09(hub  ) Sub=00 Prot=00 Driver=hub

T:  Bus=07 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#= 10 Spd=5000 MxCh= 0
D:  Ver= 3.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 9 #Cfgs=  1
P:  Vendor=152d ProdID=0562 Rev=01.03
S:  Manufacturer=JMicron
S:  Product=JMS56x Series
S:  SerialNumber=RANDOM__E3F4917AD758
C:  #Ifs= 1 Cfg#= 1 Atr=c0 MxPwr=8mA
I:  If#= 0 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50 Driver=usb-storage

T:  Bus=07 Lev=01 Prnt=01 Port=02 Cnt=02 Dev#= 11 Spd=5000 MxCh= 0
D:  Ver= 3.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 9 #Cfgs=  1
P:  Vendor=174c ProdID=55aa Rev=01.00
S:  Manufacturer=asmedia
S:  Product=ASMT1051
S:  SerialNumber=123456789012
C:  #Ifs= 1 Cfg#= 1 Atr=c0 MxPwr=144mA
I:  If#= 0 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50 Driver=usb-storage

    

Answer 1

Sim, usb-devices relatórios Driver=uas no modo de transmissão USB3 ou Driver=usb-storage no USB2. Vejo que você o deixou conectado no chipset SerialNumber=0000:04:00.0 device e, de fato, está registrado como Driver=usb-storage USB2, chamado JMicron como dispositivo 1 ( Cnt=01 ) nesse barramento.

Verifiquei as opções Driver= com meu recinto SATA USB3 de 2,5 "SATA. No entanto, não obtive seu streaming -error no dmesg ao conectá-lo a USB2, mas meu driver USB3 parece ser xhci_hcd também.

Minha versão do kernel é 4.4.0-67-generic #88-Ubuntu , sob 16,04 x64. (meu USB3: Onboard ASRock B85M 1150 : Intel Corporation 8 Series/C220 Series Chipset )

Sidenote:

Você tem um cartão VL800 / VL801 PCI-E USB3 que é Compatível com PCIE 2.0, mas com apenas uma largura x1 e é limitado a 250-500 MByte / s, o que provavelmente compromete todos os dispositivos combinados neste cartão. Lembre-se de que, mesmo que você consiga esse cartão funcionar, ficará preso a essa limitação, pois os dados não podem ser mais rápidos para outros periféricos no seu computador.

Você pode tentar outro cabo (mais espesso e mais curto geralmente é melhor) ou omitir qualquer hub USB externo que possa estar no caminho do sinal. Pessoalmente, eu iria com outra placa (depois de pesquisar sua extensão Linux Power & PCI-E com largura extra e Power Plug interno para suportar a entrega USB3 de alta potência).

Desculpe, é tudo o que tenho.