Meu adaptador Bluetooth desapareceu após a atualização de 16.04 para 16.10. O wifi ainda funciona muito bem. Estou usando uma placa 7265 dual band Intel em Dell XPS 13. Alguma idéia? Qualquer ajuda é apreciada!
EDIT: saída adicionada do dmesg | grep -i azul; lista rfkill
[bluetooth] # ligar Nenhum controlador padrão disponível
3a:00.0 Network controller: Intel Corporation Wireless 7265 (rev 48)
Subsystem: Intel Corporation Dual Band Wireless-AC 7265
Flags: bus master, fast devsel, latency 0, IRQ 288
Memory at dc200000 (64-bit, non-prefetchable) [size=8K]
Capabilities: [c8] Power Management version 3
Capabilities: [d0] MSI: Enable+ Count=1/1 Maskable- 64bit+
Capabilities: [40] Express Endpoint, MSI 00
Capabilities: [100] Advanced Error Reporting
Capabilities: [140] Device Serial Number 64-80-99-ff-ff-9d-13-72
Capabilities: [14c] Latency Tolerance Reporting
Capabilities: [154] L1 PM Substates
Kernel driver in use: iwlwifi
Kernel modules: iwlwifi
[ 2.457317] Bluetooth: Core ver 2.21
[ 2.457325] Bluetooth: HCI device and connection manager initialized
[ 2.457327] Bluetooth: HCI socket layer initialized
[ 2.457328] Bluetooth: L2CAP socket layer initialized
[ 2.457332] Bluetooth: SCO socket layer initialized
[ 2.472210] Bluetooth: HCI UART driver ver 2.3
[ 2.472212] Bluetooth: HCI UART protocol H4 registered
[ 2.472212] Bluetooth: HCI UART protocol BCSP registered
[ 2.472212] Bluetooth: HCI UART protocol LL registered
[ 2.472213] Bluetooth: HCI UART protocol ATH3K registered
[ 2.472213] Bluetooth: HCI UART protocol Three-wire (H5) registered
[ 2.472249] Bluetooth: HCI UART protocol Intel registered
[ 2.472261] Bluetooth: HCI UART protocol BCM registered
[ 2.472262] Bluetooth: HCI UART protocol QCA registered
[ 2.472262] Bluetooth: HCI UART protocol AG6XX registered
[ 4.156494] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 4.156495] Bluetooth: BNEP filters: protocol multicast
[ 4.156498] Bluetooth: BNEP socket layer initialized
[ 5.963401] Bluetooth: hci0 command 0x0c03 tx timeout
[ 14.055351] Bluetooth: hci0 sending initial HCI reset command failed (-110)
0: phy0: Wireless LAN
Soft blocked: no
Hard blocked: no
1: hci0: Bluetooth
Soft blocked: no
Hard blocked: no
obrigado,
-chris