RT3090 Wireless é 'desativado' - fixo, e o problema voltou

0

Instalei o Ubuntu Server 16.4 em um MiniPC, com a placa RT3090 Wireless. No começo, o WiFi não estava funcionando.

lshw -c network   
     ....
     *-network DISABLED
          description: Wireless interface
          product: RT3090 Wireless 802.11n 1T/1R PCIe
          vendor: Ralink 

Encontrou recomendação para colocar esses módulos na lista negra:

#Z Copied from https://sobrelinux.info/questions/116864/ralink-rt3090-in-ubuntu-14-04-very-bad-reception-keeps-disconnecting"pcmciautils").

    ##### rfkill ############################

    0: phy0: Wireless LAN
            Soft blocked: no
            Hard blocked: no

    ##### lsmod #############################

    rt2800pci              16384  0
    rt2800mmio             20480  1 rt2800pci
    rt2800lib              94208  2 rt2800pci,rt2800mmio
    rt2x00pci              16384  1 rt2800pci
    rt2x00mmio             16384  2 rt2800pci,rt2800mmio
    rt2x00lib              57344  5 rt2x00pci,rt2800lib,rt2800pci,rt2800mmio,rt2x00mmio
    mac80211              737280  3 rt2x00lib,rt2x00pci,rt2800lib
    cfg80211              565248  2 mac80211,rt2x00lib
    eeprom_93cx6           16384  1 rt2800pci
    crc_ccitt              16384  1 rt2800lib
    snd_soc_rt5670        126976  0
    snd_soc_rl6231         16384  1 snd_soc_rt5670
    snd_soc_core          212992  2 snd_soc_rt5670,snd_soc_sst_mfld_platform
    snd_pcm               106496  8 snd_soc_rt5670,snd_soc_core,snd_hda_codec_hdmi,snd_hda_codec,snd_hda_intel,snd_soc_sst_mfld_platform,snd_pcm_dmaengine,snd_hda_core

    ##### interfaces ########################

    source /etc/network/interfaces.d/*

    auto lo
    iface lo inet loopback

    auto enp1s0
    iface enp1s0 inet dhcp

    ##### ifconfig ##########################

    enp1s0    Link encap:Ethernet  HWaddr <MAC 'enp1s0' [IF1]>
              inet addr:192.168.1.191  Bcast:192.168.1.255  Mask:255.255.255.0
              inet6 addr: fe80::<IP6 'enp1s0' [IF1]>/64 Scope:Link
              UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
              RX packets:2115 errors:0 dropped:0 overruns:0 frame:0
              TX packets:1628 errors:0 dropped:0 overruns:0 carrier:0
              collisions:0 txqueuelen:1000
              RX bytes:214067 (214.0 KB)  TX bytes:254823 (254.8 KB)

    wlp2s0    Link encap:Ethernet  HWaddr <MAC 'wlp2s0' [IF2]>
              BROADCAST MULTICAST  MTU:1500  Metric:1
              RX packets:0 errors:0 dropped:0 overruns:0 frame:0
              TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
              collisions:0 txqueuelen:1000
              RX bytes:0 (0.0 B)  TX bytes:0 (0.0 B)

    ##### iwconfig ##########################

    lo        no wireless extensions.

    enp1s0    no wireless extensions.

    wlp2s0    IEEE 802.11bgn  ESSID:off/any
              Mode:Managed  Access Point: Not-Associated   Tx-Power=0 dBm
              Retry short limit:7   RTS thr:off   Fragment thr:off
              Power Management:off


    ##### route #############################

    Kernel IP routing table
    Destination     Gateway         Genmask         Flags Metric Ref    Use Iface
    0.0.0.0         192.168.1.1     0.0.0.0         UG    0      0        0 enp1s0
    192.168.1.0     0.0.0.0         255.255.255.0   U     0      0        0 enp1s0

    ##### resolv.conf #######################

    nameserver 192.168.1.1

    ##### network managers ##################

    Installed:

            None found.

    Running:

            None found.

    ##### NetworkManager info ###############

    NetworkManager is not installed (package "network-manager").

    ##### NetworkManager.state ##############

    [main]
    NetworkingEnabled=true
    WirelessEnabled=true
    WWANEnabled=true

    ##### NetworkManager.conf ###############

    [main]
    plugins=ifupdown,keyfile,ofono
    dns=dnsmasq

    [ifupdown]
    managed=false

    ##### NetworkManager profiles ###########

    [[/etc/NetworkManager/system-connections/YairHatal]] (600 root)
    [connection] id=YairHatal | type=wifi | permissions=user:zvika:;
    [wifi] mac-address=<MAC 'wlp2s0' [IF2]> | mac-address-blacklist= | ssid=YairHatal
    [ipv4] method=auto
    [ipv6] method=auto

    ##### iw reg get ########################

    Region: Asia/Jerusalem (based on set time zone)

    country 00: DFS-UNSET
            (2402 - 2472 @ 40), (N/A, 20), (N/A)
            (2457 - 2482 @ 40), (N/A, 20), (N/A), NO-IR
            (2474 - 2494 @ 20), (N/A, 20), (N/A), NO-OFDM, NO-IR
            (5170 - 5250 @ 80), (N/A, 20), (N/A), NO-IR
            (5250 - 5330 @ 80), (N/A, 20), (0 ms), DFS, NO-IR
            (5490 - 5730 @ 160), (N/A, 20), (0 ms), DFS, NO-IR
            (5735 - 5835 @ 80), (N/A, 20), (N/A), NO-IR
            (57240 - 63720 @ 2160), (N/A, 0), (N/A)

    ##### iwlist channels ###################

    lo        no frequency information.

    enp1s0    no frequency information.

    wlp2s0    14 channels in total; available frequencies :
              Channel 01 : 2.412 GHz
              Channel 02 : 2.417 GHz
              Channel 03 : 2.422 GHz
              Channel 04 : 2.427 GHz
              Channel 05 : 2.432 GHz
              Channel 06 : 2.437 GHz
              Channel 07 : 2.442 GHz
              Channel 08 : 2.447 GHz
              Channel 09 : 2.452 GHz
              Channel 10 : 2.457 GHz
              Channel 11 : 2.462 GHz
              Channel 12 : 2.467 GHz
              Channel 13 : 2.472 GHz
              Channel 14 : 2.484 GHz

    ##### iwlist scan #######################

    lo        Interface doesn't support scanning.

    enp1s0    Interface doesn't support scanning.

    wlp2s0    Interface doesn't support scanning : Network is down

    ##### module infos ######################

    [rt2800pci]
    filename:       /lib/modules/4.4.0-45-generic/kernel/drivers/net/wireless/rt2x00/rt2800pci.ko
    license:        GPL
    firmware:       rt2860.bin
    description:    Ralink RT2800 PCI & PCMCIA Wireless LAN driver.
    version:        2.3.0
    author:         http://rt2x00.serialmonkey.com
    srcversion:     26CCED9E0CE5EFBFA9B8882
    depends:        rt2x00lib,rt2800lib,rt2800mmio,rt2x00mmio,rt2x00pci,eeprom_93cx6
    intree:         Y
    vermagic:       4.4.0-45-generic SMP mod_unload modversions
    parm:           nohwcrypt:Disable hardware encryption. (bool)

    [rt2800mmio]
    filename:       /lib/modules/4.4.0-45-generic/kernel/drivers/net/wireless/rt2x00/rt2800mmio.ko
    license:        GPL
    description:    rt2800 MMIO library
    version:        2.3.0
    author:         http://rt2x00.serialmonkey.com
    srcversion:     01C1A7641505065E52E0388
    depends:        rt2800lib,rt2x00lib,rt2x00mmio
    intree:         Y
    vermagic:       4.4.0-45-generic SMP mod_unload modversions

    [rt2800lib]
    filename:       /lib/modules/4.4.0-45-generic/kernel/drivers/net/wireless/rt2x00/rt2800lib.ko
    license:        GPL
    description:    Ralink RT2800 library
    version:        2.3.0
    author:         http://rt2x00.serialmonkey.com, Bartlomiej Zolnierkiewicz
    srcversion:     BB9F48B63A82C3FD3E73BAF
    depends:        rt2x00lib,mac80211,crc-ccitt
    intree:         Y
    vermagic:       4.4.0-45-generic SMP mod_unload modversions

    [rt2x00pci]
    filename:       /lib/modules/4.4.0-45-generic/kernel/drivers/net/wireless/rt2x00/rt2x00pci.ko
    license:        GPL
    description:    rt2x00 pci library
    version:        2.3.0
    author:         http://rt2x00.serialmonkey.com
    srcversion:     543B84557258F153AC267F0
    depends:        rt2x00lib,mac80211
    intree:         Y
    vermagic:       4.4.0-45-generic SMP mod_unload modversions

    [rt2x00mmio]
    filename:       /lib/modules/4.4.0-45-generic/kernel/drivers/net/wireless/rt2x00/rt2x00mmio.ko
    license:        GPL
    description:    rt2x00 mmio library
    version:        2.3.0
    author:         http://rt2x00.serialmonkey.com
    srcversion:     ADBE279820CFD0A1081C682
    depends:        rt2x00lib
    intree:         Y
    vermagic:       4.4.0-45-generic SMP mod_unload modversions

    [rt2x00lib]
    filename:       /lib/modules/4.4.0-45-generic/kernel/drivers/net/wireless/rt2x00/rt2x00lib.ko
    license:        GPL
    description:    rt2x00 library
    version:        2.3.0
    author:         http://rt2x00.serialmonkey.com
    srcversion:     72E39180D883A5541F66494
    depends:        mac80211,cfg80211
    intree:         Y
    vermagic:       4.4.0-45-generic SMP mod_unload modversions

    [mac80211]
    filename:       /lib/modules/4.4.0-45-generic/kernel/net/mac80211/mac80211.ko
    license:        GPL
    description:    IEEE 802.11 subsystem
    srcversion:     F1176862D12ECD05A1066CF
    depends:        cfg80211
    intree:         Y
    vermagic:       4.4.0-45-generic SMP mod_unload modversions
    parm:           minstrel_vht_only:Use only VHT rates when VHT is supported by sta. (bool)
    parm:           max_nullfunc_tries:Maximum nullfunc tx tries before disconnecting (reason 4). (int)
    parm:           max_probe_tries:Maximum probe tries before disconnecting (reason 4). (int)
    parm:           beacon_loss_count:Number of beacon intervals before we decide beacon was lost. (int)
    parm:           probe_wait_ms:Maximum time(ms) to wait for probe response before disconnecting (reason 4). (int)
    parm:           ieee80211_default_rc_algo:Default rate control algorithm for mac80211 to use (charp)

    [cfg80211]
    filename:       /lib/modules/4.4.0-45-generic/kernel/net/wireless/cfg80211.ko
    description:    wireless configuration support
    license:        GPL
    author:         Johannes Berg
    srcversion:     25A45701AAA64DAC1E47D9D
    depends:
    intree:         Y
    vermagic:       4.4.0-45-generic SMP mod_unload modversions
    parm:           ieee80211_regdom:IEEE 802.11 regulatory domain code (charp)
    parm:           cfg80211_disable_40mhz_24ghz:Disable 40MHz support in the 2.4GHz band (bool)

    ##### module parameters #################

    [rt2800pci]
    nohwcrypt: N

    [mac80211]
    beacon_loss_count: 7
    ieee80211_default_rc_algo: minstrel_ht
    max_nullfunc_tries: 2
    max_probe_tries: 5
    minstrel_vht_only: Y
    probe_wait_ms: 500

    [cfg80211]
    cfg80211_disable_40mhz_24ghz: N
    ieee80211_regdom: 00

    ##### /etc/modules ######################

    ##### modprobe options ##################

    [/etc/modprobe.d/blacklist-ath_pci.conf]
    blacklist ath_pci

    [/etc/modprobe.d/blacklist.conf]
    blacklist evbug
    blacklist usbmouse
    blacklist usbkbd
    blacklist eepro100
    blacklist de4x5
    blacklist eth1394
    blacklist snd_intel8x0m
    blacklist snd_aw2
    blacklist i2c_i801
    blacklist prism54
    blacklist bcm43xx
    blacklist garmin_gps
    blacklist asus_acpi
    blacklist snd_pcsp
    blacklist pcspkr
    blacklist amd76x_edac
    blacklist rt2800usb
    blacklist rt2x00lib
    blacklist rt2x00pci
    blacklist rt2x00usb
    blacklist rt2800mmio
    blacklist rt2x00m

    [/etc/modprobe.d/blacklist-rare-network.conf]
    alias net-pf-3 off
    alias net-pf-6 off
    alias net-pf-9 off
    alias net-pf-11 off
    alias net-pf-12 off
    alias net-pf-19 off
    alias net-pf-21 off
    alias net-pf-36 off

    [/etc/modprobe.d/iwlwifi.conf]
    remove iwlwifi \
    (/sbin/lsmod | grep -o -e ^iwlmvm -e ^iwldvm -e ^iwlwifi | xargs /sbin/rmmod) \
    && /sbin/modprobe -r mac80211

    [/etc/modprobe.d/mlx4.conf]
    softdep mlx4_core post: mlx4_en

    ##### rc.local ##########################

    exit 0

    ##### pm-utils ##########################

    ##### udev rules ########################

    ##### dmesg #############################

    [    8.177532] ieee80211 phy0: rt2x00_set_rt: Info - RT chipset 3071, rev 0213 detected
    [    8.181522] ieee80211 phy0: rt2x00_set_rf: Info - RF chipset 0005 detected
    [    8.518626] r8169 0000:01:00.0 enp1s0: link down (repeated 2 times)
    [    8.518719] IPv6: ADDRCONF(NETDEV_UP): enp1s0: link is not ready
    [    8.519249] rt2800pci 0000:02:00.0 wlp2s0: renamed from wlan0
    [   11.253234] r8169 0000:01:00.0 enp1s0: link up
    [   11.253259] IPv6: ADDRCONF(NETDEV_CHANGE): enp1s0: link becomes ready

    ########## wireless info END ############
    
por Zvika 03.11.2016 / 00:28

1 resposta

0

A interface mostrando como DISABLED é exatamente a interface que não está declarada em / etc / network / interfaces. Por favor, altere o arquivo para:

source /etc/network/interfaces.d/*

auto lo
iface lo inet loopback

#auto enp1s0
iface enp1s0 inet dhcp

auto wlp2s0
iface wlp2s0 inet static
address 192.168.1.25
netmask 255.255.255.0
gateway 192.168.1.1
dns-nameservers 192.168.1.1 8.8.8.8
wpa-ssid <your_network>
wpa-psk <your_secret_key>

Sugiro um endereço estático em um servidor para que você possa fazer o ftp e ssh nele. Certifique-se de selecionar um endereço estático fora do intervalo usado pelo servidor DHCP no roteador, switch ou outro ponto de acesso.

Além disso, sua lista negra não faz sentido. Eu sugiro que você faça:

sudo gedit /etc/modprobe.d/blacklist.conf

Use nano ou kate ou leafpad se você não tiver o editor de texto gedit. Remova essas linhas que você adicionou.

#Z Copied from http://askubuntu.com/questions/478018/ralink-rt3090-in-ubuntu-14-04-very-bad-reception-keeps-disconnecting
blacklist rt2800usb
blacklist rt2x00lib
blacklist rt2x00pci
blacklist rt2x00usb
blacklist rt2800mmio
blacklist rt2x00m

Revise cuidadosamente, salve e feche o editor de texto.

Desconecte o cabo ethernet, reinicialize e nos informe se você se conectou.

    
por chili555 03.11.2016 / 17:02