Eu tenho um laptop com chipset 802.11ad da Wilocity que funciona perfeitamente no Windows. Considerando que, no Ubuntu 16.04.1 me dá uma mensagem de que o firmware está faltando e não está disponível para download, mas o driver já está disponível no sistema operacional. Eu já tenho o arquivo de firmware (wil6210.fw), então eu tentei copiá-lo para / lib / firmware e desabilitar e habilitar os adaptadores sem fio (em ordem para carregar o firmware), mas nada mudou e ainda estou recebendo a mensagem de firmware ausente . Há mais etapas que preciso fazer?
Aqui está a saída de dmesg | grep wil
[ 12.179378] EXT4-fs (sda5): write access will be enabled during recovery
[ 12.946471] EXT4-fs (sda7): write access will be enabled during recovery
[ 21.112528] wil6210 0000:02:00.0: wil6210 device found [1ae9:0310] (rev 2)
[ 21.130367] wil6210 0000:02:00.0 (unnamed net_device) (uninitialized): CSR at [mem 0xc1200000-0xc13fffff 64bit] -> 0xffffc90002c00000
[ 21.145861] wil6210 0000:02:00.0 (unnamed net_device) (uninitialized): Board hardware is Sparrow B0
[ 21.202753] wil6210 0000:02:00.0 (unnamed net_device) (uninitialized): Boot Loader struct v2: MAC = 04:ce:14:07:59:21 RF = 0x0000 (status 0x0000) bband = 0x00000000
[ 21.202758] wil6210 0000:02:00.0 (unnamed net_device) (uninitialized): Boot Loader build 255.255.0.6836
[ 21.710282] wil6210 0000:02:00.0 wlp2s0: renamed from wlan0
[ 23.552807] wil6210 0000:02:00.0 wlp2s0: Boot Loader struct v2: MAC = 04:ce:14:07:59:21 RF = 0x0000 (status 0x0000) bband = 0x00000000
[ 23.552811] wil6210 0000:02:00.0 wlp2s0: Boot Loader build 255.255.0.6836
[ 23.552813] wil6210 0000:02:00.0 wlp2s0: Use firmware <wil6210.fw> + board <wil6210.brd>
[ 23.553080] wil6210 0000:02:00.0: Direct firmware load for wil6210.fw failed with error -2
[ 23.553083] wil6210 0000:02:00.0 wlp2s0: ERR[ FW ]Failed to load firmware wil6210.fw