Como corrigir um perfil de áudio incorreto (no Skylake / Realtek ALC1150)?

0

Eu tenho um sistema Skylake (ASRock Z170 Gaming-ITX / ac) com (x) Ubuntu 16.04.

Meus alto-falantes estão conectados por meio da porta SPDIF, mas há um problema.

Quando eu inspeciono o perfil de áudio (em pavucontrol ), vejo que Analog Stereo Output (unplugged) está selecionado. Os alto-falantes são reproduzidos regularmente, mesmo que esse perfil esteja errado, mas o volume não funciona corretamente - qualquer coisa acima do mudo fará com que os alto-falantes toquem no volume máximo.

Se eu escolher o Digital Stereo (IEC958) , os palestrantes não receberão nenhum sinal.

Como posso corrigir isso?

Informações de depuração:

~$ grep "Codec:" /proc/asound/card*/codec*
/proc/asound/card0/codec#0:Codec: Realtek ALC1150
/proc/asound/card0/codec#2:Codec: Intel Skylake HDMI


~$ lspci -vv # extract
00:1f.3 Audio device: Intel Corporation Sunrise Point-H HD Audio (rev 31)
  Subsystem: ASRock Incorporation Sunrise Point-H HD Audio
  Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
  Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
  Latency: 32
  Interrupt: pin A routed to IRQ 140
  Region 0: Memory at df140000 (64-bit, non-prefetchable) [size=16K]
  Region 4: Memory at df120000 (64-bit, non-prefetchable) [size=64K]
  Capabilities: <access denied>
  Kernel driver in use: snd_hda_intel
  Kernel modules: snd_hda_intel


~$ dmesg | grep 00:1f.3
[    0.181004] pci 0000:00:1f.3: [8086:a170] type 00 class 0x040300
[    0.181034] pci 0000:00:1f.3: reg 0x10: [mem 0xdf140000-0xdf143fff 64bit]
[    0.181062] pci 0000:00:1f.3: reg 0x20: [mem 0xdf120000-0xdf12ffff 64bit]
[    0.181091] pci 0000:00:1f.3: PME# supported from D3hot D3cold
[    0.181176] pci 0000:00:1f.3: System wakeup disabled by ACPI
[    0.579846] iommu: Adding device 0000:00:1f.3 to group 8
[    3.126041] snd_hda_intel 0000:00:1f.3: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915_bpo])
[    4.185983] input: HDA Intel PCH Front Mic as /devices/pci0000:00/0000:00:1f.3/sound/card0/input11
[    4.186034] input: HDA Intel PCH Rear Mic as /devices/pci0000:00/0000:00:1f.3/sound/card0/input12
[    4.186081] input: HDA Intel PCH Line as /devices/pci0000:00/0000:00:1f.3/sound/card0/input13
[    4.186135] input: HDA Intel PCH Line Out as /devices/pci0000:00/0000:00:1f.3/sound/card0/input14
[    4.186188] input: HDA Intel PCH Front Headphone as /devices/pci0000:00/0000:00:1f.3/sound/card0/input15
[    4.186228] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input16
[    4.186267] input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input17
[    4.186304] input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input18
    
por Marcus 27.10.2016 / 09:57

1 resposta

0

O Linux Kernel 4.10 resolve esse problema.

    
por Marcus 07.02.2017 / 10:32