O carregamento da bateria ficou preso em 60%

0

Tenho o laptop Lenovo Z500 e migrei recentemente do Win7, onde usei o utilitário Lenovo para fazer com que a bateria carregasse até 60% (ele disse que prolongaria sua vida útil).

Mas depois de instalar o Ubuntu, a configuração ainda se aplica e a bateria não será carregada nesses 60%, e não consegui encontrar uma maneira de alterá-la para que ela fosse carregada até a bateria. Qualquer ajuda seria apreciada.

Editar 1 Esta é a saída de

sudo tlp stat

--- TLP 0.8 --------------------------------------------

+++ Configured Settings: /etc/default/tlp
TLP_ENABLE=1
TLP_DEFAULT_MODE=AC
DISK_IDLE_SECS_ON_AC=0
DISK_IDLE_SECS_ON_BAT=2
MAX_LOST_WORK_SECS_ON_AC=15
MAX_LOST_WORK_SECS_ON_BAT=60
SCHED_POWERSAVE_ON_AC=0
SCHED_POWERSAVE_ON_BAT=1
NMI_WATCHDOG=0
ENERGY_PERF_POLICY_ON_AC=performance
ENERGY_PERF_POLICY_ON_BAT=powersave
DISK_DEVICES="sda sdb"
DISK_APM_LEVEL_ON_AC="254 254"
DISK_APM_LEVEL_ON_BAT="128 128"
SATA_LINKPWR_ON_AC=max_performance
SATA_LINKPWR_ON_BAT=min_power
PCIE_ASPM_ON_AC=performance
PCIE_ASPM_ON_BAT=powersave
RADEON_POWER_PROFILE_ON_AC=high
RADEON_POWER_PROFILE_ON_BAT=low
RADEON_DPM_STATE_ON_AC=performance
RADEON_DPM_STATE_ON_BAT=battery
RADEON_DPM_PERF_LEVEL_ON_AC=auto
RADEON_DPM_PERF_LEVEL_ON_BAT=auto
WIFI_PWR_ON_AC=1
WIFI_PWR_ON_BAT=5
WOL_DISABLE=Y
SOUND_POWER_SAVE_ON_AC=0
SOUND_POWER_SAVE_ON_BAT=1
SOUND_POWER_SAVE_CONTROLLER=Y
BAY_POWEROFF_ON_BAT=0
BAY_DEVICE="sr0"
RUNTIME_PM_ON_AC=on
RUNTIME_PM_ON_BAT=auto
RUNTIME_PM_ALL=1
RUNTIME_PM_DRIVER_BLACKLIST="radeon nouveau"
USB_AUTOSUSPEND=1
USB_BLACKLIST_WWAN=1
RESTORE_DEVICE_STATE_ON_STARTUP=0
START_CHARGE_THRESH_BAT0=100
STOP_CHARGE_THRESH_BAT0=100

+++ System Info
System         = LENOVO Lenovo IdeaPad Z500 20202
BIOS           = 71CN44WW(V1.17)
Release        = Ubuntu 16.04.1 LTS
Kernel         = 4.4.0-36-generic #55-Ubuntu SMP Thu Aug 11 18:01:55 UTC 2016 x86_64
/proc/cmdline  = BOOT_IMAGE=/boot/vmlinuz-4.4.0-36-generic root=UUID=c6a054f1-2d7f-4cd7-a162-e0a39e4fdb28 ro quiet splash acpi_osi=
Init system    = systemd

+++ System Status
TLP power save = enabled
power source   = AC

+++ Processor
CPU Model      = Intel(R) Core(TM) i3-3120M CPU @ 2.50GHz

/sys/devices/system/cpu/cpu0/cpufreq/scaling_driver    = intel_pstate
/sys/devices/system/cpu/cpu0/cpufreq/scaling_governor  = powersave
/sys/devices/system/cpu/cpu0/cpufreq/scaling_min_freq  =  1200000 [kHz]
/sys/devices/system/cpu/cpu0/cpufreq/scaling_max_freq  =  2500000 [kHz]

/sys/devices/system/cpu/cpu1/cpufreq/scaling_driver    = intel_pstate
/sys/devices/system/cpu/cpu1/cpufreq/scaling_governor  = powersave
/sys/devices/system/cpu/cpu1/cpufreq/scaling_min_freq  =  1200000 [kHz]
/sys/devices/system/cpu/cpu1/cpufreq/scaling_max_freq  =  2500000 [kHz]

/sys/devices/system/cpu/cpu2/cpufreq/scaling_driver    = intel_pstate
/sys/devices/system/cpu/cpu2/cpufreq/scaling_governor  = powersave
/sys/devices/system/cpu/cpu2/cpufreq/scaling_min_freq  =  1200000 [kHz]
/sys/devices/system/cpu/cpu2/cpufreq/scaling_max_freq  =  2500000 [kHz]

/sys/devices/system/cpu/cpu3/cpufreq/scaling_driver    = intel_pstate
/sys/devices/system/cpu/cpu3/cpufreq/scaling_governor  = powersave
/sys/devices/system/cpu/cpu3/cpufreq/scaling_min_freq  =  1200000 [kHz]
/sys/devices/system/cpu/cpu3/cpufreq/scaling_max_freq  =  2500000 [kHz]

/sys/devices/system/cpu/intel_pstate/min_perf_pct      = 48
/sys/devices/system/cpu/intel_pstate/max_perf_pct      = 100
/sys/devices/system/cpu/intel_pstate/no_turbo          = 1

x86_energy_perf_policy: program not installed.

/proc/sys/kernel/nmi_watchdog                          = 0

+++ Undervolting
PHC kernel not available.

+++ Temperatures
CPU temp               =    50 [°C]
Fan speed (fan1)       =     0 [/min]

+++ File System
/proc/sys/vm/laptop_mode               =     0
/proc/sys/vm/dirty_writeback_centisecs =  1500
/proc/sys/vm/dirty_expire_centisecs    =  1500
/proc/sys/vm/dirty_ratio               =    20
/proc/sys/vm/dirty_background_ratio    =    10
/proc/sys/fs/xfs/age_buffer_centisecs  = (not available)
/proc/sys/fs/xfs/xfssyncd_centisecs    = (not available)
/proc/sys/fs/xfs/xfsbufd_centisecs     = (not available)

+++ Storage Devices
/dev/sda:
          Model     = ST500LM000-1EJ162                       
          Firmware  = LVD1    
          APM Level = 254
          Status    = active/idle
          Scheduler = deadline


+++ SATA Aggressive Link Power Management
/sys/class/scsi_host/host0/link_power_management_policy  = max_performance
/sys/class/scsi_host/host1/link_power_management_policy  = max_performance
/sys/class/scsi_host/host2/link_power_management_policy  = max_performance
/sys/class/scsi_host/host3/link_power_management_policy  = max_performance
/sys/class/scsi_host/host4/link_power_management_policy  = max_performance
/sys/class/scsi_host/host5/link_power_management_policy  = max_performance

+++ PCIe Active State Power Management
/sys/module/pcie_aspm/parameters/policy = default (using bios preferences)

+++ Intel Graphics
/sys/module/i915/parameters/powersave        = (not available)
/sys/module/i915/parameters/enable_rc6       =  3 (enabled + deep)
/sys/module/i915/parameters/enable_fbc       = -1 (use per-chip default)
/sys/module/i915/parameters/lvds_downclock   = (not available)
/sys/module/i915/parameters/semaphores       = -1 (use per-chip default)

+++ Wireless
bluetooth = on
wifi      = on
wwan      = none (no device)

hci0(btusb)         : not connected
wlp3s0(iwlwifi)     : connected, power management = off

+++ Audio
/sys/module/snd_hda_intel/parameters/power_save            = 0
/sys/module/snd_hda_intel/parameters/power_save_controller = N

+++ Runtime Power Management
device classes   = all
device blacklist = (not configured)
driver blacklist = radeon nouveau

/sys/bus/pci/devices/0000:00:00.0/power/control = on   (0x060000, Host bridge, ivb_uncore)
/sys/bus/pci/devices/0000:00:01.0/power/control = on   (0x060400, PCI bridge, pcieport)
/sys/bus/pci/devices/0000:00:02.0/power/control = on   (0x030000, VGA compatible controller, i915)
/sys/bus/pci/devices/0000:00:14.0/power/control = on   (0x0c0330, USB controller, xhci_hcd)
/sys/bus/pci/devices/0000:00:16.0/power/control = on   (0x078000, Communication controller, mei_me)
/sys/bus/pci/devices/0000:00:1a.0/power/control = on   (0x0c0320, USB controller, ehci-pci)
/sys/bus/pci/devices/0000:00:1b.0/power/control = on   (0x040300, Audio device, snd_hda_intel)
/sys/bus/pci/devices/0000:00:1c.0/power/control = on   (0x060400, PCI bridge, pcieport)
/sys/bus/pci/devices/0000:00:1c.1/power/control = on   (0x060400, PCI bridge, pcieport)
/sys/bus/pci/devices/0000:00:1d.0/power/control = on   (0x0c0320, USB controller, ehci-pci)
/sys/bus/pci/devices/0000:00:1f.0/power/control = on   (0x060100, ISA bridge, lpc_ich)
/sys/bus/pci/devices/0000:00:1f.2/power/control = on   (0x010601, SATA controller, ahci)
/sys/bus/pci/devices/0000:00:1f.3/power/control = on   (0x0c0500, SMBus, no driver)
/sys/bus/pci/devices/0000:01:00.0/power/control = on   (0x030200, 3D controller, no driver)
/sys/bus/pci/devices/0000:02:00.0/power/control = on   (0x020000, Ethernet controller, r8169)
/sys/bus/pci/devices/0000:03:00.0/power/control = on   (0x028000, Network controller, iwlwifi)

+++ USB
autosuspend        = enabled
device whitelist   = (not configured)
device blacklist   = (not configured)
wwan blacklist     = enabled

Bus 002 Device 002 ID 8087:0024 control = auto, autosuspend_delay_ms =     0 -- Intel Corp. Integrated Rate Matching Hub (hub)
Bus 002 Device 001 ID 1d6b:0002 control = auto, autosuspend_delay_ms =     0 -- Linux Foundation 2.0 root hub (hub)
Bus 001 Device 004 ID 0bda:0129 control = auto, autosuspend_delay_ms =  2000 -- Realtek Semiconductor Corp. RTS5129 Card Reader Controller (rtsx_usb)
Bus 001 Device 003 ID 8087:07da control = auto, autosuspend_delay_ms =  2000 -- Intel Corp.  (btusb)
Bus 001 Device 002 ID 8087:0024 control = auto, autosuspend_delay_ms =     0 -- Intel Corp. Integrated Rate Matching Hub (hub)
Bus 001 Device 001 ID 1d6b:0002 control = auto, autosuspend_delay_ms =     0 -- Linux Foundation 2.0 root hub (hub)
Bus 004 Device 001 ID 1d6b:0003 control = auto, autosuspend_delay_ms =     0 -- Linux Foundation 3.0 root hub (hub)
Bus 003 Device 003 ID 04f2:b35d control = auto, autosuspend_delay_ms =  2000 -- Chicony Electronics Co., Ltd  (uvcvideo)
Bus 003 Device 002 ID 046d:c051 control = on,   autosuspend_delay_ms =  2000 -- Logitech, Inc. G3 (MX518) Optical Mouse (usbhid)
Bus 003 Device 001 ID 1d6b:0002 control = auto, autosuspend_delay_ms =     0 -- Linux Foundation 2.0 root hub (hub)

+++ Battery Status
/sys/class/power_supply/BAT1/manufacturer                   = LENOVO 
/sys/class/power_supply/BAT1/model_name                     = PABAS0241231
/sys/class/power_supply/BAT1/cycle_count                    = (not supported)
/sys/class/power_supply/BAT1/energy_full_design             =      0 [mWh]
/sys/class/power_supply/BAT1/energy_full                    =  28820 [mWh]
/sys/class/power_supply/BAT1/energy_now                     =  17150 [mWh]
/sys/class/power_supply/BAT1/power_now                      = 655350 [mW]
/sys/class/power_supply/BAT1/status                         = Unknown
    
por frenzy 14.09.2016 / 18:32

2 respostas

0

vamos ver se a bateria foi temperada. Instalar ferramentas TLP.

% bl0ck_qu0te%

E, em seguida, execute:

% bl0ck_qu0te%

Para iniciar o serviço e, em seguida,

% bl0ck_qu0te%

para obter os detalhes da bateria.

Nos forneça a saída disso, especificamente o parâmetro CAPACITY no final.

    
por Mookey 14.09.2016 / 20:08
0

Para a Dell, está disponível no BIOS. Há uma configuração de carga primária na qual eu escolho em qual porcentagem, a bateria inicia e para de carregar. E isso se aplicaria prontamente em todos os sistemas operacionais do PC.

Eu acredito que deve haver algo equivalente em seu BIOS, bem como o utilitário do Windows deve ter mudado isso escrevendo diretamente para esta configuração. Então, olhe pacientemente para todas as opções na sua BIOS e encontre esta configuração.

    
por Yaksha 12.12.2017 / 04:23