GParted 0.25.0 --enable-libparted-dmraid --enable-online-resize
Libparted 3.2
Create Primary Partition #1 (ext3, 119.24 GiB) on /dev/sdb 00:02:45 ( ERROR )
create empty partition 00:00:16 ( SUCCESS )
path: /dev/sdb1 (partition)
start: 2048
end: 250068991
size: 250066944 (119.24 GiB)
clear old file system signatures in /dev/sdb1 00:00:12 ( SUCCESS )
write 512.00 KiB of zeros at byte offset 0 00:00:00 ( SUCCESS )
write 4.00 KiB of zeros at byte offset 67108864 00:00:00 ( SUCCESS )
write 512.00 KiB of zeros at byte offset 128033751040 00:00:00 ( SUCCESS )
write 4.00 KiB of zeros at byte offset 128034209792 00:00:00 ( SUCCESS )
write 8.00 KiB of zeros at byte offset 128034267136 00:00:00 ( SUCCESS )
flush operating system cache of /dev/sdb 00:00:06 ( SUCCESS )
set partition type on /dev/sdb1 00:00:12 ( SUCCESS )
new partition type: ext3
create new ext3 file system 00:02:05 ( ERROR )
mkfs.ext3 -F -L "" /dev/sdb1 00:02:05 ( ERROR )
Discarding device blocks: failed - Input/output error
Creating filesystem with 31258368 4k blocks and 7815168 inodes
Filesystem UUID: 495c08bd-fe1e-4287-8273-d29541964640
Superblock backups stored on blocks:
32768, 98304, 163840, 229376, 294912, 819200, 884736, 1605632, 2654208,
4096000, 7962624, 11239424, 20480000, 23887872
Allocating group tables: done
Writing inode tables: done
Creating journal (32768 blocks): done
Writing superblocks and filesystem accounting information: 0/954
mke2fs 1.42.13 (17-May-2015)
Warning, had trouble writing out superblocks.
libparted messages ( INFO )
Input/output error during read on /dev/sdb
The backup GPT table is corrupt, but the primary appears OK, so that will be used.
Input/output error during write on /dev/sdb
Input/output error during write on /dev/sdb
Input/output error during read on /dev/sdb
The backup GPT table is corrupt, but the primary appears OK, so that will be used.
Input/output error during write on /dev/sdb
Error fsyncing/closing /dev/sdb: Input/output error
Input/output error during read on /dev/sdb
The backup GPT table is corrupt, but the primary appears OK, so that will be used.
Input/output error during write on /dev/sdb
Input/output error during write on /dev/sdb
========================================