Tenho uma torre com / etc / ssh / sshd_config como segue:
X11Forwarding yes
X11DisplayOffset 10
X11UseLocalhost no
quando eu me conecto a ele com o ssh com meu laptop com o seguinte arquivo .ssh / config
Host=*
Compression=yes
ForwardAgent=yes
ForwardX11=yes
PubkeyAcceptedKeyTypes=+ssh-dss
Eu tenho essas opções de depuração
debug2: x11_get_proto: /usr/bin/xauth list :0 2>/dev/null
debug1: Requesting X11 forwarding with authentication spoofing.
debug2: channel 0: request x11-req confirm 1
debug2: X11 forwarding request accepted on channel 0
E temos por padrão essa variável $ DISPLAY
tower:10.0
Quando tento executar um aplicativo de GUI, recebo o seguinte erro:
pg@pipoTower: ~$ kate
debug1: client_input_channel_open: ctype x11 rchan 4 win 65536 max 16384
debug1: client_request_x11: request from 127.0.0.1 58798
debug2: fd 7 setting O_NONBLOCK
debug1: channel 1: new [x11]
debug1: confirm x11
debug2: X11 connection uses different authentication protocol.
X11 connection rejected because of wrong authentication.
debug2: X11 rejected 1 i0/o0
debug2: channel 1: read failed
debug2: channel 1: close_read
debug2: channel 1: input open -> drain
debug2: channel 1: ibuf empty
debug2: channel 1: send eof
debug2: channel 1: input drain -> closed
debug2: channel 1: write failed
debug2: channel 1: close_write
debug2: channel 1: output open -> closed
debug2: X11 closed 1 i3/o3
debug2: channel 1: send close
debug2: channel 1: rcvd close
debug2: channel 1: is dead
debug2: channel 1: garbage collecting
debug1: channel 1: free: x11, nchannels 2
QXcbConnection: Could not connect to display pipoTower:10.0
Aborted (core dumped)
Eu tentei xhost + na torre (host) & amp; para definir a variável $ DISPLAY para o IP do meu laptop que é export DISPLAY='192.168.178.25:0.0' ainda tem o mesmo erro, alguém tem idéia do que eu estou perdendo?