durante a instalação do linux em um macbook pro 6,2 (2010) como um sistema de inicialização única, estou recebendo o seguinte erro com o instalador do linux no live usb: "Executando 'grub-install / dev / sda' falhou Isso é um erro fatal. " Eu tive uma instalação anterior 'bem sucedida' de hortelã, mas caiu, presumivelmente devido a um problema de vídeo. Eu não estou interessado em ter o Mac OS na máquina em tudo. parece que há uma partição EFI em sda para a instalação do grub (estou assumindo que é onde o grub é instalado?). Eu corri o 'bootinfoscript' e os resultados seguem abaixo. quaisquer pensamentos são apreciados. obrigado:
============================= Boot Info Summary: ===============================
=> No boot loader is installed in the MBR of /dev/sda.
=> No known boot loader is installed in the MBR of /dev/sdc.
sda1: __________________________________________________________________________
File system: vfat
Boot sector type: FAT32
Boot sector info: No errors found in the Boot Parameter Block.
Operating System:
Boot files:
sda2: __________________________________________________________________________
File system: swap
Boot sector type: -
Boot sector info:
sda3: __________________________________________________________________________
File system: ext4
Boot sector type: -
Boot sector info:
Operating System: Linux Mint 17.2 Rafaela
Boot files: /etc/fstab
sdc1: __________________________________________________________________________
File system: iso9660
Boot sector type: Unknown
Boot sector info:
Mounting failed: mount: /dev/sdc1 already mounted or sdc1 busy
sdc2: __________________________________________________________________________
File system: vfat
Boot sector type: FAT16
Boot sector info: According to the info in the boot sector, sdc2 starts
at sector 0. But according to the info from fdisk,
sdc2 starts at sector 3173944. According to the info
in the boot sector, sdc2 has 0 sectors.
Mounting failed: mount: /dev/sdc1 already mounted or sdc1 busy
mount: /dev/sdc2 already mounted or sdc2 busy
============================ Drive/Partition Info: =============================
Drive: sda _____________________________________________________________________
Disk /dev/sda: 320.1 GB, 320072933376 bytes
255 heads, 63 sectors/track, 38913 cylinders, total 625142448 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
Partition Boot Start Sector End Sector # of Sectors Id System
/dev/sda1 1 976,895 976,895 ee GPT
/dev/sda2 * 609,517,568 625,141,759 15,624,192 82 Linux swap / Solaris
/dev/sda3 976,896 609,517,567 608,540,672 83 Linux
GUID Partition Table detected.
Partition Start Sector End Sector # of Sectors System
/dev/sda1 2,048 976,895 974,848 EFI System partition
/dev/sda2 609,517,568 625,141,759 15,624,192 Swap partition (Linux)
/dev/sda3 976,896 609,517,567 608,540,672 Data partition (Linux)
Drive: sdc _____________________________________________________________________
Disk /dev/sdc: 8154 MB, 8154250752 bytes
255 heads, 63 sectors/track, 991 cylinders, total 15926271 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
Partition Boot Start Sector End Sector # of Sectors Id System
/dev/sdc1 * 0 3,186,175 3,186,176 0 Empty
/dev/sdc2 3,173,944 3,178,615 4,672 ef EFI (FAT-12/16/32)
/dev/sdc1 overlaps with /dev/sdc2
GUID Partition Table detected, but does not seem to be used.
Partition Start Sector End Sector # of Sectors System
/dev/sdc1 0 3,186,119 3,186,120 Data partition (Windows/Linux)
/dev/sdc2 3,173,944 3,178,615 4,672 Data partition (Windows/Linux)
"blkid" output: ________________________________________________________________
Device UUID TYPE LABEL
/dev/loop0 squashfs
/dev/sda1 C427-EC39 vfat
/dev/sda2 7711ab90-830e-4a97-85ce-870caab06621 swap
/dev/sda3 cc7fd146-7e0e-46dd-b029-3a3adb7daf6c ext4
/dev/sdc1 iso9660 Linux Mint 17.2 Cinnamon 64-bit
/dev/sdc2 3006-9304 vfat
================================ Mount points: =================================
Device Mount_Point Type Options
/dev/loop0 /rofs squashfs (ro,noatime)
/dev/sdc /cdrom iso9660 (ro,noatime)
=============================== sda3/etc/fstab: ================================
--------------------------------------------------------------------------------
# /etc/fstab: static file system information.
#
# Use 'blkid' to print the universally unique identifier for a
# device; this may be used with UUID= as a more robust way to name devices
# that works even if disks are added and removed. See fstab(5).
#
# <file system> <mount point> <type> <options> <dump> <pass>
# / was on /dev/sda3 during installation
UUID=cc7fd146-7e0e-46dd-b029-3a3adb7daf6c / ext4 errors=remount-ro 0 1
# /boot/efi was on /dev/sda1 during installation
UUID=C427-EC39 /boot/efi vfat defaults 0 1
# swap was on /dev/sda2 during installation
UUID=7711ab90-830e-4a97-85ce-870caab06621 none swap sw 0 0
--------------------------------------------------------------------------------
=================== sda3: Location of files loaded by Grub: ====================
GiB - GB File Fragment(s)
Verifique suas configurações: Configurações do sistema - > Atualizações de Software - > Verificar todos os softwares do Ubuntu- > Outro Software- > Parceiros canônicos verificados.
Abra um terminal CTL + ALt + T
Atualize suas configurações sudo apt-get update && apt-get upgrade
Verifique todos os pacotes - > sudo apt-get -f install
Instale o novo Kernel sudo apt-get dist-upgrade
Atualize seu grub- > sudo update-grub
Reiniciar - > sudo reboot
Tags grub2