Meu laptop não consegue detectar wifi

0

Por favor me ajude a resolver o meu problema, o seguinte é detalhe do meu dispositivo

link

########## wireless info START ##########

Report from: 19 Jan 2016 20:18 WIB +0700

Booted last: 19 Jan 2016 19:38 WIB +0700

Script from: 27 Sep 2015 00:34 UTC +0000

##### release ###########################

Distributor ID: Ubuntu
Description:    Ubuntu 14.04.3 LTS
Release:    14.04
Codename:   trusty

##### kernel ############################

Linux 3.19.0-25-generic #26~14.04.1-Ubuntu SMP Fri Jul 24 21:16:20 UTC 2015 x86_64 x86_64 x86_64 GNU/Linux

Parameters: ro, quiet, splash, vt.handoff=7

##### desktop ###########################........

sed: can't read /root/.dmrc: No such file or directory

Could not be determined.

##### lspci #############################

03:00.0 Network controller [0280]: Intel Corporation Wireless 7260 [8086:08b1] (rev bb)
    Subsystem: Intel Corporation Dual Band Wireless-AC 7260 [8086:4070]

04:00.0 Unassigned class [ff00]: Realtek Semiconductor Co., Ltd. Device [10ec:5287] (rev 01)

04:00.1 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller [10ec:8168] (rev 12)
    Subsystem: CLEVO/KAPOK Computer Device [1558:5019]
    Kernel driver in use: r8169

##### lsusb #############################

Bus 004 Device 002: ID 8087:8000 Intel Corp. 
Bus 004 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 003 Device 002: ID 8087:8008 Intel Corp. 
Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 001 Device 003: ID 04f2:b43b Chicony Electronics Co., Ltd 
Bus 001 Device 002: ID 8087:07dc Intel Corp. 
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub

##### PCMCIA card info ##################

##### rfkill ############################

##### lsmod #############################

##### interfaces ########################

auto lo
iface lo inet loopback

##### ifconfig ##########################

eth0      Link encap:Ethernet  HWaddr <MAC 'eth0' [IF]>  
          inet addr:192.168.34.171  Bcast:192.168.34.255  Mask:255.255.255.0
          inet6 addr: fe80::<IP6 'eth0' [IF]>/64 Scope:Link
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:16972 errors:0 dropped:0 overruns:0 frame:0
          TX packets:14743 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000 
          RX bytes:12082075 (12.0 MB)  TX bytes:1891465 (1.8 MB)

##### iwconfig ##########################

eth0      no wireless extensions.

lo        no wireless extensions.

##### route #############################

Kernel IP routing table
Destination     Gateway         Genmask         Flags Metric Ref    Use Iface
0.0.0.0         192.168.34.1    0.0.0.0         UG    0      0        0 eth0
192.168.34.0    0.0.0.0         255.255.255.0   U     1      0        0 eth0

##### resolv.conf #######################

nameserver 127.0.1.1

##### network managers ##################

Installed:

    NetworkManager

Running:

root      1064     1  0 19:38 ?        00:00:00 NetworkManager

##### NetworkManager info ###############

NetworkManager Tool

State: connected (global)

- Device: eth0  [Wired connection 1] -------------------------------------------
  Type:              Wired
  Driver:            r8169
  State:             connected
  Default:           yes
  HW Address:        <MAC 'eth0' [IF]>

  Capabilities:
    Carrier Detect:  yes
    Speed:           1000 Mb/s

  Wired Properties
    Carrier:         on

  IPv4 Settings:
    Address:         192.168.34.171
    Prefix:          24 (255.255.255.0)
    Gateway:         192.168.34.1

    DNS:             103.24.48.1
    DNS:             103.24.48.2

##### NetworkManager.state ##############

[main]
NetworkingEnabled=true
WirelessEnabled=true
WWANEnabled=true
WimaxEnabled=true

##### NetworkManager.conf ###############

[main]
plugins=ifupdown,keyfile,ofono
dns=dnsmasq

[ifupdown]
managed=false

##### NetworkManager profiles ###########

[[/etc/NetworkManager/system-connections/Wi-Fi connection 1]] (600 root)
[connection] id=PUPNS | type=802-11-wireless
[802-11-wireless] ssid=PUPNS
[ipv6] method=auto
[ipv4] method=auto

##### iw reg get ########################

nl80211 not found.

##### iwlist channels ###################

eth0      no frequency information.

lo        no frequency information.

##### iwlist scan #######################

eth0      Interface doesn't support scanning.

lo        Interface doesn't support scanning.

##### module infos ######################

##### module parameters #################

##### /etc/modules ######################

lp

##### modprobe options ##################

[/etc/modprobe.d/blacklist-ath_pci.conf]
blacklist ath_pci

[/etc/modprobe.d/blacklist.conf]
blacklist evbug
blacklist usbmouse
blacklist usbkbd
blacklist eepro100
blacklist de4x5
blacklist eth1394
blacklist snd_intel8x0m
blacklist snd_aw2
blacklist i2c_i801
blacklist prism54
blacklist bcm43xx
blacklist garmin_gps
blacklist asus_acpi
blacklist snd_pcsp
blacklist pcspkr
blacklist amd76x_edac

[/etc/modprobe.d/blacklist-rare-network.conf]
alias net-pf-3 off
alias net-pf-6 off
alias net-pf-9 off
alias net-pf-11 off
alias net-pf-12 off
alias net-pf-19 off
alias net-pf-21 off
alias net-pf-36 off

[/etc/modprobe.d/iwlwifi.conf]
remove iwlwifi \
(/sbin/lsmod | grep -o -e ^iwlmvm -e ^iwldvm -e ^iwlwifi | xargs /sbin/rmmod) \
&& /sbin/modprobe -r mac80211

[/etc/modprobe.d/mlx4.conf]
softdep mlx4_core post: mlx4_en

##### rc.local ##########################

exit 0

##### pm-utils ##########################

##### udev rules ########################

[/etc/udev/rules.d/70-persistent-net.rules]
# PCI device 0x10ec:/sys/devices/pci0000:00/0000:00:1c.3/0000:04:00.1 (r8169)
SUBSYSTEM=="net", ACTION=="add", DRIVERS=="?*", ATTR{address}=="<MAC 'eth0' [IF]>", ATTR{dev_id}=="0x0", ATTR{type}=="1", KERNEL=="eth*", NAME="eth0"

##### dmesg #############################

[   24.142504] r8169 0000:04:00.1 eth0: link down
[   24.142549] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 1255.811428] r8169 0000:04:00.1 eth0: link up
[ 1255.811447] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready

########## wireless info END ############
    
por Muhammad Khoirul Hasin 19.01.2016 / 14:28

1 resposta

0

Tem a certeza de que não a desativou com uma chave de hardware?

Eu apenas experimentei meu cartão 7260 e desativar com a chave de hardware significa que ele não aparecerá no ifconfig, então acho que isso é problema seu. Seu cartão deve funcionar imediatamente!

Boa sorte.

    
por Joakim Koed 19.01.2016 / 14:43