Eu possuo um servidor Ubuntu com 3 x 1.5TB SATA2 em Software RAID5 e LVM , ele é executado como Nó VPS.
Esse cara matutino do datacenter me enviou um e-mail que sda está corrompido e precisa ser alterado ... Então ele mudou e descobriu que o sdc também está corrompido , e eu exigi que ele retornasse o antigo sda para que eu pudesse tentar restaurar alguns arquivos.
Eu instalei o grub-install no sdb mas ele está desconfigurado, e no sdb1 existe apenas "lost + found" (eu montei no sistema de resgate ao vivo e verifiquei), e isso é apenas partição que eu posso montar, como você pode veja em seguir (+ fsck):
root@rescue ~ # ll /mnt/
total 0
root@rescue ~ # cd /mnt/
root@rescue /mnt # mkdir sda sda1 sda2 sdb sdb1 sdb2 sdc
root@rescue /mnt # mount /dev/sda /mnt/sda
mount: /dev/sda already mounted or /mnt/sda busy
root@rescue /mnt # mount /dev/sda1 /mnt/sda1
mount: unknown filesystem type 'linux_raid_member'
root@rescue /mnt # mount /dev/sda2 /mnt/sda2
mount: unknown filesystem type 'linux_raid_member'
root@rescue /mnt # mount /dev/sdb /mnt/sdb
mount: you must specify the filesystem type
root@rescue /mnt # mount /dev/sdb1 /mnt/sdb1
root@rescue /mnt # mount /dev/sdb2 /mnt/sdb2
mount: you must specify the filesystem type
root@rescue /mnt # mount /dev/sdc /mnt/sdc
mount: you must specify the filesystem type
root@rescue /mnt #
root@rescue /mnt # df -h
Filesystem Size Used Avail Use% Mounted on
rootfs 12G 1.6M 12G 1% /
udev 12G 0 12G 0% /dev
188.40.24.212:/nfs 1.4T 592G 722G 46% /root/.oldroot/nfs
aufs 12G 1.6M 12G 1% /
tmpfs 2.4G 288K 2.4G 1% /run
tmpfs 5.0M 0 5.0M 0% /run/lock
tmpfs 4.8G 0 4.8G 0% /run/shm
/dev/sdb1 492M 2.9M 453M 1% /mnt/sdb1
root@rescue /mnt # fsck /dev/sda
fsck from util-linux 2.20.1
e2fsck 1.42.5 (29-Jul-2012)
/dev/sda is in use.
e2fsck: Cannot continue, aborting.
root@rescue /mnt # fsck /dev/sda1
fsck from util-linux 2.20.1
fsck: fsck.linux_raid_member: not found
fsck: error 2 while executing fsck.linux_raid_member for /dev/sda1
root@rescue /mnt # fsck /dev/sda2
fsck from util-linux 2.20.1
fsck: fsck.linux_raid_member: not found
fsck: error 2 while executing fsck.linux_raid_member for /dev/sda2
root@rescue /mnt # fsck /dev/sdc
fsck from util-linux 2.20.1
^C
e2fsck 1.42.5 (29-Jul-2012)
fsck.ext2: Attempt to read block from filesystem resulted in short read while trying to open /dev/sdc
Could this be a zero-length partition?
root@rescue /mnt #
root@rescue /mnt # fsck /dev/sdb
fsck from util-linux 2.20.1
e2fsck 1.42.5 (29-Jul-2012)
/dev/sdb is in use.
e2fsck: Cannot continue, aborting.
root@rescue /mnt # fsck /dev/sdb1
fsck from util-linux 2.20.1
e2fsck 1.42.5 (29-Jul-2012)
/dev/sdb1 is mounted.
e2fsck: Cannot continue, aborting.
root@rescue /mnt # fsck /dev/sdb2
fsck from util-linux 2.20.1
e2fsck 1.42.5 (29-Jul-2012)
ext2fs_open2: Bad magic number in super-block
fsck.ext2: Superblock invalid, trying backup blocks...
fsck.ext2: Bad magic number in super-block while trying to open /dev/sdb2
The superblock could not be read or does not describe a correct ext2
filesystem. If the device is valid and it really contains an ext2
filesystem (and not swap or ufs or something else), then the superblock
is corrupt, and you might try running e2fsck with an alternate superblock:
e2fsck -b 8193 <device>
Também aqui estão algumas informações adicionais:
root@rescue /mnt # mount /dev/sdc /mnt/sdc
root@rescue /mnt # mount /dev/sda /mnt/sda
mount: /dev/sda already mounted or /mnt/sda busy
root@rescue /mnt # dmesg | tail -n 100
[ 5983.073733] ata4.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 5983.093445] ata4.00: irq_stat 0x40000001
[ 5983.112706] ata4.00: cmd c8/00:02:1a:00:00/00:00:00:00:00/e0 tag 0 dma 1024 in
[ 5983.112706] res 51/04:02:1a:00:00/00:00:00:00:00/e0 Emask 0x1 (device error)
[ 5983.152382] ata4.00: configured for UDMA/133 (device error ignored)
[ 5983.152389] ata4: EH complete
[ 5983.152524] ata4.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 5983.172225] ata4.00: irq_stat 0x40000001
[ 5983.191500] ata4.00: cmd c8/00:02:1a:00:00/00:00:00:00:00/e0 tag 0 dma 1024 in
[ 5983.191500] res 51/04:02:1a:00:00/00:00:00:00:00/e0 Emask 0x1 (device error)
[ 5983.231138] ata4.00: configured for UDMA/133 (device error ignored)
[ 5983.231145] ata4: EH complete
[ 5983.231280] ata4.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 5983.250992] ata4.00: irq_stat 0x40000001
[ 5983.270263] ata4.00: cmd c8/00:02:1a:00:00/00:00:00:00:00/e0 tag 0 dma 1024 in
[ 5983.270263] res 51/04:02:1a:00:00/00:00:00:00:00/e0 Emask 0x1 (device error)
[ 5983.309890] ata4.00: configured for UDMA/133 (device error ignored)
[ 5983.309898] ata4: EH complete
[ 5983.310033] ata4.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 5983.329745] ata4.00: irq_stat 0x40000001
[ 5983.349017] ata4.00: cmd c8/00:02:1a:00:00/00:00:00:00:00/e0 tag 0 dma 1024 in
[ 5983.349017] res 51/04:02:1a:00:00/00:00:00:00:00/e0 Emask 0x1 (device error)
[ 5983.388611] ata4.00: configured for UDMA/133 (device error ignored)
[ 5983.388618] ata4: EH complete
[ 5983.388847] ata4.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 5983.408712] ata4.00: irq_stat 0x40000001
[ 5983.429984] ata4.00: cmd c8/00:02:1a:00:00/00:00:00:00:00/e0 tag 0 dma 1024 in
[ 5983.429984] res 51/04:02:1a:00:00/00:00:00:00:00/e0 Emask 0x1 (device error)
[ 5983.474085] ata4.00: configured for UDMA/133 (device error ignored)
[ 5983.474100] ata4: EH complete
[ 5983.474228] ata4.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 5983.494517] ata4.00: irq_stat 0x40000001
[ 5983.514473] ata4.00: cmd c8/00:02:1a:00:00/00:00:00:00:00/e0 tag 0 dma 1024 in
[ 5983.514473] res 51/04:02:1a:00:00/00:00:00:00:00/e0 Emask 0x1 (device error)
[ 5983.555572] ata4.00: configured for UDMA/133 (device error ignored)
[ 5983.555587] sd 3:0:0:0: [sdc]
[ 5983.555590] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[ 5983.555593] sd 3:0:0:0: [sdc]
[ 5983.555595] Sense Key : Aborted Command [current] [descriptor]
[ 5983.555598] Descriptor sense data with sense descriptors (in hex):
[ 5983.555600] 72 0b 00 00 00 00 00 0c 00 0a 80 00 00 00 00 00
[ 5983.555608] 00 00 00 1a
[ 5983.555613] sd 3:0:0:0: [sdc]
[ 5983.555615] Add. Sense: No additional sense information
[ 5983.555619] sd 3:0:0:0: [sdc] CDB:
[ 5983.555620] Read(10): 28 00 00 00 00 1a 00 00 02 00
[ 5983.555628] end_request: I/O error, dev sdc, sector 26
[ 5983.575924] Buffer I/O error on device sdc, logical block 13
[ 5983.596058] ata4: EH complete
[ 5983.596189] ata4.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 5983.616541] ata4.00: irq_stat 0x40000001
[ 5983.636612] ata4.00: cmd c8/00:04:1c:00:00/00:00:00:00:00/e0 tag 0 dma 2048 in
[ 5983.636612] res 51/04:04:1c:00:00/00:00:00:00:00/e0 Emask 0x1 (device error)
[ 5983.677777] ata4.00: configured for UDMA/133 (device error ignored)
[ 5983.677784] ata4: EH complete
[ 5983.677924] ata4.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 5983.698262] ata4.00: irq_stat 0x40000001
[ 5983.718291] ata4.00: cmd c8/00:04:1c:00:00/00:00:00:00:00/e0 tag 0 dma 2048 in
[ 5983.718291] res 51/04:04:1c:00:00/00:00:00:00:00/e0 Emask 0x1 (device error)
[ 5983.759539] ata4.00: configured for UDMA/133 (device error ignored)
[ 5983.759553] ata4: EH complete
[ 5983.759675] ata4.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 5983.779991] ata4.00: irq_stat 0x40000001
[ 5983.800041] ata4.00: cmd c8/00:04:1c:00:00/00:00:00:00:00/e0 tag 0 dma 2048 in
[ 5983.800041] res 51/04:04:1c:00:00/00:00:00:00:00/e0 Emask 0x1 (device error)
[ 5983.841255] ata4.00: configured for UDMA/133 (device error ignored)
[ 5983.841269] ata4: EH complete
[ 5983.841391] ata4.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 5983.861707] ata4.00: irq_stat 0x40000001
[ 5983.881708] ata4.00: cmd c8/00:04:1c:00:00/00:00:00:00:00/e0 tag 0 dma 2048 in
[ 5983.881708] res 51/04:04:1c:00:00/00:00:00:00:00/e0 Emask 0x1 (device error)
[ 5983.922818] ata4.00: configured for UDMA/133 (device error ignored)
[ 5983.922831] ata4: EH complete
[ 5983.922952] ata4.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 5983.943262] ata4.00: irq_stat 0x40000001
[ 5983.963273] ata4.00: cmd c8/00:04:1c:00:00/00:00:00:00:00/e0 tag 0 dma 2048 in
[ 5983.963273] res 51/04:04:1c:00:00/00:00:00:00:00/e0 Emask 0x1 (device error)
[ 5984.004398] ata4.00: configured for UDMA/133 (device error ignored)
[ 5984.004412] ata4: EH complete
[ 5984.004561] ata4.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 5984.024824] ata4.00: irq_stat 0x40000001
[ 5984.044713] ata4.00: cmd c8/00:04:1c:00:00/00:00:00:00:00/e0 tag 0 dma 2048 in
[ 5984.044713] res 51/04:04:1c:00:00/00:00:00:00:00/e0 Emask 0x1 (device error)
[ 5984.085733] ata4.00: configured for UDMA/133 (device error ignored)
[ 5984.085741] sd 3:0:0:0: [sdc]
[ 5984.085743] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[ 5984.085744] sd 3:0:0:0: [sdc]
[ 5984.085745] Sense Key : Aborted Command [current] [descriptor]
[ 5984.085746] Descriptor sense data with sense descriptors (in hex):
[ 5984.085747] 72 0b 00 00 00 00 00 0c 00 0a 80 00 00 00 00 00
[ 5984.085751] 00 00 00 1c
[ 5984.085753] sd 3:0:0:0: [sdc]
[ 5984.085754] Add. Sense: No additional sense information
[ 5984.085755] sd 3:0:0:0: [sdc] CDB:
[ 5984.085756] Read(10): 28 00 00 00 00 1c 00 00 04 00
[ 5984.085760] end_request: I/O error, dev sdc, sector 28
[ 5984.106176] Buffer I/O error on device sdc, logical block 14
[ 5984.126323] Buffer I/O error on device sdc, logical block 15
[ 5984.146119] ata4: EH complete
[ 5984.146128] cramfs: wrong magic
root@rescue /mnt #
root@rescue ~ # ll /dev/sd*
brw-rw---T 1 root disk 8, 0 Nov 18 17:56 /dev/sda
brw-rw---T 1 root disk 8, 1 Nov 18 17:57 /dev/sda1
brw-rw---T 1 root disk 8, 2 Nov 18 17:57 /dev/sda2
brw-rw---T 1 root disk 8, 16 Nov 18 17:56 /dev/sdb
brw-rw---T 1 root disk 8, 17 Nov 18 17:56 /dev/sdb1
brw-rw---T 1 root disk 8, 18 Nov 18 18:53 /dev/sdb2
brw-rw---T 1 root disk 8, 32 Nov 18 18:24 /dev/sdc
root@rescue ~ # ll /dev/md*
brw-rw---T 1 root disk 9, 0 Nov 18 17:57 /dev/md0
brw-rw---T 1 root disk 9, 1 Nov 18 17:57 /dev/md1
/dev/md:
total 0
root@rescue ~ # mdadm --detail /dev/md0
/dev/md0:
Version : 0.90
Creation Time : Sun Oct 17 14:55:20 2010
Raid Level : raid1
Array Size : 528128 (515.84 MiB 540.80 MB)
Used Dev Size : 528128 (515.84 MiB 540.80 MB)
Raid Devices : 3
Total Devices : 1
Preferred Minor : 0
Persistence : Superblock is persistent
Update Time : Mon Nov 18 19:40:49 2013
State : clean, degraded
Active Devices : 1
Working Devices : 1
Failed Devices : 0
Spare Devices : 0
UUID : acc3740a:bf0cfaea:776c2c25:004bd7b2 (local to host rescue)
Events : 0.1416
Number Major Minor RaidDevice State
0 8 1 0 active sync /dev/sda1
1 0 0 1 removed
2 0 0 2 removed
root@rescue ~ # mdadm --detail /dev/md1
mdadm: md device /dev/md1 does not appear to be active.
Se alguém tiver alguma sugestão que seria ótima;) Obrigado, Frane M.
Muitos de nós usarão testdisk para resgatar os dados corrompidos no HDD.
sudo apt-get install testdisk
instalará o & amp; sudo testdisk pode lançá-lo.
para saber como usar o disco de teste para recuperar seus dados, é diferente para um PC diferente. Então eu não posso ser mais específico, mas esses links podem ajudá-lo.