Driver sem fio Broadcom STA [duplicado]

0

Ao tentar ativar o driver sem fio, percebo que ele não pôde ser ativado. Diz para verificar os logs. Eu sou um completo noobie para o Ubuntu e estou geralmente tentando aprender mais sobre computadores como eu vou. Aqui está o log. Qualquer ajuda seria extremamente apreciada. Minha conexão ethernet funciona bem, se isso faz alguma diferença.

tail -f /var/log/jockey.log

2013-08-27 21:52:41,104 DEBUG: BroadcomWLHandler enabled(): kmod disabled, bcm43xx: blacklisted, b43: blacklisted, b43legacy: blacklisted
2013-08-27 21:52:41,129 DEBUG: BroadcomWLHandler enabled(): kmod disabled, bcm43xx: blacklisted, b43: blacklisted, b43legacy: blacklisted
2013-08-27 21:52:51,349 DEBUG: BroadcomWLHandler enabled(): kmod disabled, bcm43xx: blacklisted, b43: blacklisted, b43legacy: blacklisted
2013-08-27 21:52:58,681 WARNING: modinfo for module wl failed: ERROR: modinfo: could not find module wl

2013-08-27 21:52:58,681 WARNING: /sys/module/wl/drivers does not exist, cannot rebind wl driver
2013-08-27 21:52:58,750 DEBUG: BroadcomWLHandler enabled(): kmod disabled, bcm43xx: blacklisted, b43: blacklisted, b43legacy: blacklisted
2013-08-27 21:54:07,963 DEBUG: BroadcomWLHandler enabled(): kmod disabled, bcm43xx: blacklisted, b43: blacklisted, b43legacy: blacklisted
2013-08-27 21:54:07,980 DEBUG: BroadcomWLHandler enabled(): kmod disabled, bcm43xx: blacklisted, b43: blacklisted, b43legacy: blacklisted
2013-08-27 21:54:08,004 DEBUG: BroadcomWLHandler enabled(): kmod disabled, bcm43xx: blacklisted, b43: blacklisted, b43legacy: blacklisted
2013-08-27 22:07:53,899 DEBUG: BroadcomWLHandler enabled(): kmod disabled, bcm43xx: blacklisted, b43: blacklisted, b43legacy: blacklisted
2013-08-27 22:07:59,045 WARNING: modinfo for module wl failed: ERROR: modinfo: could not find module wl

2013-08-27 22:07:59,046 WARNING: /sys/module/wl/drivers does not exist, cannot rebind wl driver
2013-08-27 22:07:59,088 DEBUG: BroadcomWLHandler enabled(): kmod disabled, bcm43xx: blacklisted, b43: blacklisted, b43legacy: blacklisted
2013-08-27 22:08:13,260 DEBUG: BroadcomWLHandler enabled(): kmod disabled, bcm43xx: blacklisted, b43: blacklisted, b43legacy: blacklisted
2013-08-27 22:08:13,282 DEBUG: BroadcomWLHandler enabled(): kmod disabled, bcm43xx: blacklisted, b43: blacklisted, b43legacy: blacklisted
2013-08-27 22:08:13,318 DEBUG: BroadcomWLHandler enabled(): kmod disabled, bcm43xx: blacklisted, b43: blacklisted, b43legacy: blacklisted

lspci

00:00.0 Host bridge: Intel Corporation Core Processor DRAM Controller (rev 12)
00:01.0 PCI bridge: Intel Corporation Core Processor PCI Express x16 Root Port (rev 12)
00:16.0 Communication controller: Intel Corporation 5 Series/3400 Series Chipset HECI Controller (rev 06)
00:1a.0 USB controller: Intel Corporation 5 Series/3400 Series Chipset USB2 Enhanced Host Controller (rev 06)
00:1b.0 Audio device: Intel Corporation 5 Series/3400 Series Chipset High Definition Audio (rev 06)
00:1c.0 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 1 (rev 06)
00:1c.1 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 2 (rev 06)
00:1c.5 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 6 (rev 06)
00:1d.0 USB controller: Intel Corporation 5 Series/3400 Series Chipset USB2 Enhanced Host Controller (rev 06)
00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev a6)
00:1f.0 ISA bridge: Intel Corporation Mobile 5 Series Chipset LPC Interface Controller (rev 06)
00:1f.2 SATA controller: Intel Corporation 5 Series/3400 Series Chipset 4 port SATA AHCI Controller (rev 06)
00:1f.3 SMBus: Intel Corporation 5 Series/3400 Series Chipset SMBus Controller (rev 06)
00:1f.6 Signal processing controller: Intel Corporation 5 Series/3400 Series Chipset Thermal Subsystem (rev 06)
02:00.0 VGA compatible controller: Advanced Micro Devices, Inc. [AMD/ATI] RV710/M92 [Mobility Radeon HD 4330/4350/4550]
02:00.1 Audio device: Advanced Micro Devices, Inc. [AMD/ATI] RV710/730 HDMI Audio [Radeon HD 4000 series]
04:00.0 Network controller: Broadcom Corporation BCM4312 802.11b/g LP-PHY (rev 01)
05:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8101E/RTL8102E PCI Express Fast Ethernet controller (rev 02)
ff:00.0 Host bridge: Intel Corporation Core Processor QuickPath Architecture Generic Non-core Registers (rev 02)
ff:00.1 Host bridge: Intel Corporation Core Processor QuickPath Architecture System Address Decoder (rev 02)
ff:02.0 Host bridge: Intel Corporation Core Processor QPI Link 0 (rev 02)
ff:02.1 Host bridge: Intel Corporation Core Processor QPI Physical 0 (rev 02)
ff:02.2 Host bridge: Intel Corporation Core Processor Reserved (rev 02)
ff:02.3 Host bridge: Intel Corporation Core Processor Reserved (rev 02)

sudo lshw -c

Hardware Lister (lshw) - B.02.15
usage: lshw [-format] [-options ...]
       lshw -version

    -version        print program version (B.02.15)

format can be
    -html           output hardware tree as HTML
    -xml            output hardware tree as XML
    -short          output hardware paths
    -businfo        output bus information

options can be
    -class CLASS    only show a certain class of hardware
    -C CLASS        same as '-class CLASS'
    -c CLASS        same as '-class CLASS'
    -disable TEST   disable a test (like pci, isapnp, cpuid, etc. )
    -enable TEST    enable a test (like pci, isapnp, cpuid, etc. )
    -quiet          don't display status
    -sanitize       sanitize output (remove sensitive information like serial numbers, etc.)
    -numeric        output numeric IDs (for PCI, USB, etc.)

rfkill list all

Não retorna nada. Talvez algo aqui é o problema? Não está pegando e conexões disponíveis. Tenho um botão de bloqueio que não acredito ser o problema no meu laptop e verifiquei as configurações de inicialização para ter certeza de que as conexões sem fio estão ativadas.

lsb_release -a

No LSB modules are available.
Distributor ID: Ubuntu
Description:    Ubuntu 12.04.3 LTS
Release:    12.04
Codename:   precise
    
por Ryan 28.08.2013 / 07:12

2 respostas

0

Por favor, siga como abaixo,

Primeiro, execute os seguintes comandos para instalar os pacotes

sudo apt-get install linux-libc-dev libc6-dev linux-headers-generic linux-headers-$(uname -r)

Agora abra o driver adicional e tente reativar o driver. Se o sucesso reiniciar e verificar. Se tiver êxito e ao reiniciar, seu hardware ainda não está funcionando, tente rfkill unblock all .

Se a ativação falhar, execute os comandos abaixo,

sudo apt-get remove --purge bcmwl-kernel-source - se falhar, não se preocupe

próximo

sudo apt-get install b43-fwcutter firmware-b43-lpphy-installer

Reinicialize novamente e tente novamente.

Resposta extraída de - Instalando os drivers Broadcom Wireless . Você pode explorar se quiser.

    
por Web-E 28.08.2013 / 10:22
0

Eu sou um novo usuário do Ubuntu 13.10 e novo no Linux. O abaixo funcionou no meu cartão [14e4: 4312] no Dell M6300, exceto com

firmware-b43-lpphy-installer

substituído por

firmware-b43-installer

Aparentemente, a parte -lpphy foi substituída.

    
por art 22.12.2013 / 00:38