Wifi usb adaptador atheros 9170 chipset não está funcionando no Ubuntu 13.04

Question

Sou novo no Ubuntu e no Linux. Acabei de mudar meu sistema operacional do Windows 7 para o Ubuntu. Estou executando um laptop HP / Compaq 6910p. Meu adaptador Icidu 300N 802.11n parou para funcionar. Ele contém um chipset atheros AR9170.

Eu li muitas respostas neste e em outros fóruns, mas nenhuma delas me deu as respostas.

Alguém aí pode me dar um bom conselho?

lshw mostra:

WARNING: you should run this program as super-user.
  *-network               
       description: Ethernet interface
       product: 82566MM Gigabit Network Connection
       vendor: Intel Corporation
       physical id: 19
       bus info: pci@0000:00:19.0
       logical name: eth0
       version: 03
       serial: 00:1b:38:eb:45:38
       size: 1Gbit/s
       capacity: 1Gbit/s
       width: 32 bits
       clock: 33MHz
       capabilities: bus_master cap_list ethernet physical tp 10bt 10bt-fd 100bt 100bt-fd 1000bt-fd autonegotiation
       configuration: autonegotiation=on broadcast=yes driver=e1000e driverversion=2.1.4-k duplex=full firmware=0.3-0 ip=192.168.0.122 latency=0 link=yes multicast=yes port=twisted pair speed=1Gbit/s
       resources: irq:43 memory:e4620000-e463ffff memory:e4640000-e4640fff ioport:4060(size=32)


  *-network DISABLED
       description: Wireless interface
       product: PRO/Wireless 4965 AG or AGN [Kedron] Network Connection
       vendor: Intel Corporation
       physical id: 0
       bus info: pci@0000:10:00.0
       logical name: wlan1
       version: 61
       serial: 00:1d:e0:67:f5:3b
       width: 64 bits
       clock: 33MHz
       capabilities: bus_master cap_list ethernet physical wireless
       configuration: broadcast=yes driver=iwl4965 driverversion=3.8.0-30-generic firmware=228.61.2.24 latency=0 link=no multicast=yes wireless=IEEE 802.11abgn
       resources: irq:48 memory:e4000000-e4001fff


  *-network DISABLED
       description: Wireless interface
       physical id: 1
       bus info: usb@2:1
       logical name: wlan0
       serial: 6c:fd:b9:07:0e:c7
       capabilities: ethernet physical wireless
       configuration: broadcast=yes driver=carl9170 driverversion=3.8.0-30-generic firmware=1.9.6 link=no multicast=yes wireless=IEEE 802.11bgn

lsusb mostra:

Bus 002 Device 002: ID 0cf3:1002 Atheros Communications, Inc. TP-Link TL-WN821N v2 802.11n [Atheros AR9170]
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub

    

Answer 1

Estou bastante desconfiado de que o interruptor sem fio ou a combinação de teclas esteja em falta aqui. Por favor, veja:

% bl0ck_qu0te%

Vamos colocar na lista negra o driver do dispositivo interno e ligar o wireless novamente:

sudo -i
echo "blacklist iwl4965" >> /etc/modprobe.d/blacklist.conf
exit

Agora, gire o botão de volta para ativar sem fio, reinicialize e informe se o USB está funcionando.