Você deve instalar o build-essential e as dependências com:
sudo apt-get install build-essential libpci-dev libusb-dev libusb-1.0-0-dev \
libftdi-dev linux-headers-generic
Em seguida, faça o download, extraia e compile seu aplicativo:
cd ~/Downloads
wget https://review.coreboot.org/cgit/flashrom.git/snapshot/flashrom-p1.0.tar.gz
tar -xf flashrom-p1.0.tar.gz
cd flashrom-p1.0/
make
Após a compilação, você encontrará flashrom executável no diretório atual, produzindo a seguinte saída:
$./flashrom
flashrom on Linux 4.15.0-20-generic (x86_64)
flashrom is free software, get the source code at https://flashrom.org
Please select a programmer with the --programmer parameter.
Previously this was not necessary because there was a default set.
To choose the mainboard of this computer use 'internal'. Valid choices are:
internal, dummy, nic3com, nicrealtek, gfxnvidia, drkaiser, satasii, atavia,
it8212, ft2232_spi, serprog, buspirate_spi, dediprog, rayer_spi, pony_spi,
nicintel, nicintel_spi, nicintel_eeprom, ogp_spi, satamv, linux_spi,
usbblaster_spi, pickit2_spi, ch341a_spi.