O driver Brother solicita o endereço IP da impressora de rede?

0

Estou tentando instalar um driver Brother para uma impressora conectada à WLAN do roteador. O motorista me pergunta por um endereço IP, que eu não sei como dar, e não tenho certeza do porque é necessário. O driver é do site da Brother

Eu escolhi a opção DNSSD para a impressora, e uma página de teste é impressa, mas eu tenho que enviar um endereço IP para concluir a instalação do driver.

Como posso configurar esta impressora?

ifconfig revela:

eno1: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500
    ether a0:1d:48:fa:67:c0  txqueuelen 1000  (Ethernet)
    RX packets 0  bytes 0 (0.0 B)
    RX errors 0  dropped 0  overruns 0  frame 0
    TX packets 0  bytes 0 (0.0 B)
    TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0

lo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536
    inet 127.0.0.1  netmask 255.0.0.0
    inet6 ::1  prefixlen 128  scopeid 0x10<host>
    loop  txqueuelen 1000  (Local Loopback)
    RX packets 2740  bytes 223080 (223.0 KB)
    RX errors 0  dropped 0  overruns 0  frame 0
    TX packets 2740  bytes 223080 (223.0 KB)
    TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0

tun0: flags=4305<UP,POINTOPOINT,RUNNING,NOARP,MULTICAST>  mtu 1500
    inet 10.7.7.208  netmask 255.255.255.0  destination 10.7.7.208
    inet6 fe80::3f1a:4fc3:dde6:ae30  prefixlen 64  scopeid 0x20<link>
    unspec 00-00-00-00-00-00-00-00-00-00-00-00-00-00-00-00  txqueuelen 100  (UNSPEC)
    RX packets 125429  bytes 151411646 (151.4 MB)
    RX errors 0  dropped 0  overruns 0  frame 0
    TX packets 80076  bytes 7343109 (7.3 MB)
    TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0

vmnet1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500
    inet 192.168.110.1  netmask 255.255.255.0  broadcast 192.168.110.255
    inet6 fe80::250:56ff:fec0:1  prefixlen 64  scopeid 0x20<link>
    ether 00:50:56:c0:00:01  txqueuelen 1000  (Ethernet)
    RX packets 0  bytes 0 (0.0 B)
    RX errors 0  dropped 0  overruns 0  frame 0
    TX packets 1158  bytes 0 (0.0 B)
    TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0

vmnet8: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500
    inet 192.168.50.1  netmask 255.255.255.0  broadcast 192.168.50.255
    inet6 fe80::250:56ff:fec0:8  prefixlen 64  scopeid 0x20<link>
    ether 00:50:56:c0:00:08  txqueuelen 1000  (Ethernet)
    RX packets 0  bytes 0 (0.0 B)
    RX errors 0  dropped 0  overruns 0  frame 0
    TX packets 1159  bytes 0 (0.0 B)
    TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0

wlo1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500
    inet 192.168.1.128  netmask 255.255.255.0  broadcast 192.168.1.255
    inet6 fe80::82d9:a987:6fc0:ef4a  prefixlen 64  scopeid 0x20<link>
    ether e4:70:b8:f8:99:b8  txqueuelen 1000  (Ethernet)
    RX packets 147190  bytes 183578731 (183.5 MB)
    RX errors 0  dropped 0  overruns 0  frame 0
    TX packets 59747  bytes 16899305 (16.8 MB)
    TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0

    
por Sarah Szabo 02.06.2018 / 00:50

0 respostas