Eu fiz a varredura do smartdisk usando sudo smartctl -h /dev/sda .
meu problema é que não consigo formatar meu disco du para erro de saída de entrada
aqui está a saída do meu comando
smartctl 6.6 2016-05-31 r4324 [x86_64-linux-4.15.0-20-generic] (local build)
Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Model Family: Seagate Samsung SpinPoint M8 (AF)
Device Model: ST1000LM024 HN-M101MBB
Serial Number: S2WZJ90D310845
LU WWN Device Id: 5 0004cf 209d571b8
Firmware Version: 2AR20004
User Capacity: 1,000,204,886,016 bytes [1.00 TB]
Sector Size: 512 bytes logical/physical
Rotation Rate: 5400 rpm
Form Factor: 2.5 inches
Device is: In smartctl database [for details use: -P show]
ATA Version is: ATA8-ACS T13/1699-D revision 6
SATA Version is: SATA 3.0, 3.0 Gb/s (current: 3.0 Gb/s)
Local Time is: Tue May 8 13:58:25 2018 UTC
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x00) Offline data collection activity
was never started.
Auto Offline Data Collection: Disabled.
Self-test execution status: ( 121) The previous self-test completed having
the read element of the test failed.
Total time to complete Offline
data collection: (12900) seconds.
Offline data collection
capabilities: (0x5b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
No Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 215) minutes.
SCT capabilities: (0x003f) SCT Status supported.
SCT Error Recovery Control supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x002f 100 100 051 Pre-fail Always - 15003
2 Throughput_Performance 0x0026 252 252 000 Old_age Always - 0
3 Spin_Up_Time 0x0023 090 081 025 Pre-fail Always - 3061
4 Start_Stop_Count 0x0032 087 087 000 Old_age Always - 13843
5 Reallocated_Sector_Ct 0x0033 252 252 010 Pre-fail Always - 0
7 Seek_Error_Rate 0x002e 252 252 051 Old_age Always - 0
8 Seek_Time_Performance 0x0024 252 252 015 Old_age Offline - 0
9 Power_On_Hours 0x0032 100 100 000 Old_age Always - 4072
10 Spin_Retry_Count 0x0032 252 252 051 Old_age Always - 0
11 Calibration_Retry_Count 0x0032 100 100 000 Old_age Always - 639
12 Power_Cycle_Count 0x0032 097 097 000 Old_age Always - 3865
13 Read_Soft_Error_Rate 0x003a 100 100 000 Old_age Always - 0
181 Program_Fail_Cnt_Total 0x0022 100 100 000 Old_age Always - 14610532
191 G-Sense_Error_Rate 0x0022 100 100 000 Old_age Always - 1144
192 Power-Off_Retract_Count 0x0022 252 252 000 Old_age Always - 0
193 Load_Cycle_Count 0x0032 094 094 000 Old_age Always - 64422
194 Temperature_Celsius 0x0002 062 052 000 Old_age Always - 38 (Min/Max 10/53)
195 Hardware_ECC_Recovered 0x003a 100 100 000 Old_age Always - 0
196 Reallocated_Event_Count 0x0032 252 252 000 Old_age Always - 0
197 Current_Pending_Sector 0x0032 100 100 000 Old_age Always - 95
198 Offline_Uncorrectable 0x0030 252 252 000 Old_age Offline - 0
199 UDMA_CRC_Error_Count 0x0036 100 100 000 Old_age Always - 149
200 Multi_Zone_Error_Rate 0x002a 100 100 000 Old_age Always - 2529
240 Head_Flying_Hours 0x0032 100 100 000 Old_age Always - 3891
241 Total_LBAs_Written 0x0032 094 089 000 Old_age Always - 9077718
242 Total_LBAs_Read 0x0032 094 088 000 Old_age Always - 8727697
254 Free_Fall_Sensor 0x0032 252 252 000 Old_age Always - 0
SMART Error Log Version: 1
ATA Error Count: 2712 (device log contains only the most recent five errors)
CR = Command Register [HEX]
FR = Features Register [HEX]
SC = Sector Count Register [HEX]
SN = Sector Number Register [HEX]
CL = Cylinder Low Register [HEX]
CH = Cylinder High Register [HEX]
DH = Device/Head Register [HEX]
DC = Device Command Register [HEX]
ER = Error register [HEX]
ST = Status register [HEX]
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.
Error 2712 occurred at disk power-on lifetime: 4072 hours (169 days + 16 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 08 00 08 00 e0 Error: UNC 8 sectors at LBA = 0x00000800 = 2048
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
c8 00 08 00 08 00 e0 00 00:00:03.701 READ DMA
ef 10 02 00 00 00 a0 00 00:00:03.701 SET FEATURES [Enable SATA feature]
27 00 00 00 00 00 e0 00 00:00:03.701 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3]
ec 00 00 00 00 00 a0 00 00:00:03.701 IDENTIFY DEVICE
ef 03 46 00 00 00 a0 00 00:00:03.701 SET FEATURES [Set transfer mode]
Error 2711 occurred at disk power-on lifetime: 4072 hours (169 days + 16 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 08 00 08 00 e0 Error: UNC 8 sectors at LBA = 0x00000800 = 2048
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
c8 00 08 00 08 00 e0 00 00:00:03.698 READ DMA
25 00 08 a0 61 70 e0 00 00:00:03.698 READ DMA EXT
25 00 08 f8 69 70 e0 00 00:00:03.698 READ DMA EXT
25 00 08 d0 69 70 e0 00 00:00:03.698 READ DMA EXT
25 00 08 e0 69 70 e0 00 00:00:03.698 READ DMA EXT
Error 2710 occurred at disk power-on lifetime: 4072 hours (169 days + 16 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 08 00 00 04 e0 Error: UNC 8 sectors at LBA = 0x00040000 = 262144
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
c8 00 08 00 00 04 e0 00 00:00:03.678 READ DMA
ef 10 02 00 00 00 a0 00 00:00:03.678 SET FEATURES [Enable SATA feature]
27 00 00 00 00 00 e0 00 00:00:03.678 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3]
ec 00 00 00 00 00 a0 00 00:00:03.678 IDENTIFY DEVICE
ef 03 46 00 00 00 a0 00 00:00:03.678 SET FEATURES [Set transfer mode]
Error 2709 occurred at disk power-on lifetime: 4072 hours (169 days + 16 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 08 00 00 04 e0 Error: UNC 8 sectors at LBA = 0x00040000 = 262144
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
c8 00 08 00 00 04 e0 00 00:00:03.674 READ DMA
35 00 40 b0 fe 21 e0 00 00:00:03.674 WRITE DMA EXT
35 00 40 70 f9 21 e0 00 00:00:03.674 WRITE DMA EXT
35 00 40 30 f4 21 e0 00 00:00:03.674 WRITE DMA EXT
35 00 40 f0 ee 21 e0 00 00:00:03.674 WRITE DMA EXT
Error 2708 occurred at disk power-on lifetime: 4072 hours (169 days + 16 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 08 00 08 00 e0 Error: UNC 8 sectors at LBA = 0x00000800 = 2048
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
c8 00 08 00 08 00 e0 00 00:00:03.652 READ DMA
ef 10 02 00 00 00 a0 00 00:00:03.652 SET FEATURES [Enable SATA feature]
27 00 00 00 00 00 e0 00 00:00:03.652 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3]
ec 00 00 00 00 00 a0 00 00:00:03.652 IDENTIFY DEVICE
ef 03 46 00 00 00 a0 00 00:00:03.652 SET FEATURES [Set transfer mode]
SMART Self-test log structure revision number 1
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
# 1 Short offline Completed: read failure 90% 4058 2048
# 2 Short offline Completed: read failure 90% 3990 2048
# 3 Short offline Completed without error 00% 2926 -
# 4 Short offline Completed without error 00% 2918 -
# 5 Short offline Completed without error 00% 5 -
# 6 Short offline Completed without error 00% 0 -
# 7 Offline Completed without error 00% 0 -
SMART Selective self-test log data structure revision number 0
Note: revision number not 1 implies that no selective self-test has ever been run
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Completed_read_failure [90% left] (0-65535)
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.