MAMP em MAC Yosemite SSL, WSGI

3

Eu instalei o MAMP após testar com o XAMPP, eu preciso instalar o Openssl ou gerar certificados SSL e um controller no wsgi executado no XAMPP não fazer isso mas gostaria de saber se alguém pode me ajudar a configurar o httpd.conf

Já instalei o SSL, mas quando tento carregar minha página principal, imprimo um erro em um console de registros

Falha ao carregar recurso: o servidor respondeu com um status de 404 (não encontrado) Uncaught TypeError: Não é possível ler a propriedade "function" de undefinided

link

wsgi-petition.js

Código anexado no httpd.conf, httpd-ssl.conf e httpd-vhosts.conf

ServerRoot "/Applications/MAMP/Library"

<IfModule !mpm_netware.c>
PidFile logs/httpd.pid
</IfModule>

Listen 80

LoadModule authn_file_module modules/mod_authn_file.so
LoadModule authn_dbm_module modules/mod_authn_dbm.so
LoadModule authn_anon_module modules/mod_authn_anon.so
LoadModule authn_dbd_module modules/mod_authn_dbd.so
LoadModule authn_default_module modules/mod_authn_default.so
LoadModule authz_host_module modules/mod_authz_host.so
LoadModule authz_groupfile_module modules/mod_authz_groupfile.so
LoadModule authz_user_module modules/mod_authz_user.so
LoadModule authz_dbm_module modules/mod_authz_dbm.so
LoadModule authz_owner_module modules/mod_authz_owner.so
LoadModule authz_default_module modules/mod_authz_default.so
LoadModule auth_basic_module modules/mod_auth_basic.so
LoadModule auth_digest_module modules/mod_auth_digest.so
LoadModule file_cache_module modules/mod_file_cache.so
LoadModule cache_module modules/mod_cache.so
LoadModule disk_cache_module modules/mod_disk_cache.so
LoadModule mem_cache_module modules/mod_mem_cache.so
LoadModule dbd_module modules/mod_dbd.so
LoadModule bucketeer_module modules/mod_bucketeer.so
LoadModule dumpio_module modules/mod_dumpio.so
LoadModule echo_module modules/mod_echo.so
LoadModule case_filter_module modules/mod_case_filter.so
LoadModule case_filter_in_module modules/mod_case_filter_in.so
LoadModule reqtimeout_module modules/mod_reqtimeout.so
LoadModule ext_filter_module modules/mod_ext_filter.so
LoadModule include_module modules/mod_include.so
LoadModule filter_module modules/mod_filter.so
LoadModule substitute_module modules/mod_substitute.so
LoadModule charset_lite_module modules/mod_charset_lite.so
LoadModule deflate_module modules/mod_deflate.so
LoadModule log_config_module modules/mod_log_config.so
LoadModule logio_module modules/mod_logio.so
LoadModule env_module modules/mod_env.so
LoadModule mime_magic_module modules/mod_mime_magic.so
LoadModule cern_meta_module modules/mod_cern_meta.so
LoadModule expires_module modules/mod_expires.so
LoadModule headers_module modules/mod_headers.so
LoadModule ident_module modules/mod_ident.so
LoadModule usertrack_module modules/mod_usertrack.so
#LoadModule unique_id_module modules/mod_unique_id.so
LoadModule setenvif_module modules/mod_setenvif.so
LoadModule version_module modules/mod_version.so
LoadModule proxy_module modules/mod_proxy.so
LoadModule proxy_connect_module modules/mod_proxy_connect.so
LoadModule proxy_ftp_module modules/mod_proxy_ftp.so
LoadModule proxy_http_module modules/mod_proxy_http.so
LoadModule proxy_scgi_module modules/mod_proxy_scgi.so
LoadModule proxy_ajp_module modules/mod_proxy_ajp.so
LoadModule proxy_balancer_module modules/mod_proxy_balancer.so
LoadModule ssl_module modules/mod_ssl.so
LoadModule mime_module modules/mod_mime.so
LoadModule dav_module modules/mod_dav.so
LoadModule status_module modules/mod_status.so
LoadModule autoindex_module modules/mod_autoindex.so
LoadModule asis_module modules/mod_asis.so
LoadModule info_module modules/mod_info.so
LoadModule cgi_module modules/mod_cgi.so
LoadModule fastcgi_module modules/mod_fastcgi.so
LoadModule cgid_module modules/mod_cgid.so
LoadModule dav_fs_module modules/mod_dav_fs.so
LoadModule vhost_alias_module modules/mod_vhost_alias.so
LoadModule negotiation_module modules/mod_negotiation.so
LoadModule dir_module modules/mod_dir.so
LoadModule imagemap_module modules/mod_imagemap.so
LoadModule actions_module modules/mod_actions.so
LoadModule speling_module modules/mod_speling.so
LoadModule userdir_module modules/mod_userdir.so
LoadModule alias_module modules/mod_alias.so
LoadModule rewrite_module modules/mod_rewrite.so
LoadModule perl_module modules/mod_perl.so
LoadModule wsgi_module modules/mod_wsgi.so
LoadModule xsendfile_module modules/mod_xsendfile.so

LoadModule php5_module        /Applications/MAMP/bin/php/php5.6.7/modules/libphp5.so

#
AddType application/x-httpd-php .php .phtml

<IfModule !mpm_netware_module>
<IfModule !mpm_winnt_module>

User usuario
Group #-1

</IfModule>
</IfModule>

<IfModule xsendfile_module>
    XSendFile on
</IfModule>


ServerAdmin [email protected]

ServerName localhost:80

DocumentRoot "/Users/usuario/Sites/usuariocloud/client"

<Directory />
    Options Indexes FollowSymLinks
    AllowOverride None
</Directory>

<Directory "/Users/usuario/Sites/usuariocloud/client">
    Options All
    AllowOverride All
    Order allow,deny
    Allow from all

    XSendFilePath "/Applications/MAMP/htdocs"
</Directory>

<IfModule dir_module>
    DirectoryIndex index.html index.php

    <IfModule perl_module>
        DirectoryIndex index.pl
    </IfModule>

    <IfModule wsgi_module>
        DirectoryIndex index.wsgi index.py
    </IfModule>

</IfModule>

AccessFileName .htaccess

<FilesMatch "^\.ht">
    Order allow,deny
    Deny from all
    Satisfy All
</FilesMatch>

<Files ~ "^\.DS_Store">
    Order allow,deny
    Deny from all
</Files>

ErrorLog "/Applications/MAMP/logs/apache_error.log"

LogLevel error

<IfModule log_config_module>
    LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\"" combined
    LogFormat "%h %l %u %t \"%r\" %>s %b" common

    <IfModule logio_module>
      # You need to enable mod_logio.c to use %I and %O
      LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\" %I %O" combinedio
    </IfModule>

</IfModule>

<IfModule alias_module>
    Alias /favicon.ico "/Applications/MAMP/bin/favicon.ico"

    Alias /icons/ "/Applications/MAMP/Library/icons/"

    <Directory "/Applications/MAMP/Library/icons">
        Options Indexes MultiViews
        AllowOverride None
        Order allow,deny
        Allow from all
    </Directory>

    Alias /phpMyAdmin "/Applications/MAMP/bin/phpMyAdmin"
    Alias /phpmyadmin "/Applications/MAMP/bin/phpMyAdmin"

    <Directory "/Applications/MAMP/bin/phpMyAdmin">
        Options Indexes MultiViews
        AllowOverride None
        Order allow,deny
        Allow from all
    </Directory>

    Alias /phpPgAdmin "/Applications/MAMP/bin/phpPgAdmin"
    Alias /phppgadmin "/Applications/MAMP/bin/phpPgAdmin"

    <Directory "/Applications/MAMP/bin/phpPgAdmin">
        Options Indexes MultiViews
        AllowOverride None
        Order allow,deny
        Allow from all
    </Directory>

    Alias /phpLiteAdmin "/Applications/MAMP/bin/phpLiteAdmin"
    Alias /phpliteadmin "/Applications/MAMP/bin/phpLiteAdmin"

    <Directory "/Applications/MAMP/bin/phpLiteAdmin">
        Options Indexes MultiViews
        AllowOverride None
        Order allow,deny
        Allow from all
    </Directory>

    Alias /SQLiteManager "/Applications/MAMP/bin/SQLiteManager"
    Alias /sqlitemanager "/Applications/MAMP/bin/SQLiteManager"

    <Directory "/Applications/MAMP/bin/SQLiteManager">
        Options Indexes MultiViews
        AllowOverride None
        Order allow,deny
        Allow from all
    </Directory>

    Alias /MAMP "/Applications/MAMP/bin/mamp"

    <Directory "/Applications/MAMP/bin/mamp">
        Options Indexes MultiViews
        AllowOverride None
        Order allow,deny
        Allow from all
    </Directory>

    #
    # ScriptAlias: This controls which directories contain server scripts. 
    # ScriptAliases are essentially the same as Aliases, except that
    # documents in the target directory are treated as applications and
    # run by the server when requested rather than as documents sent to the
    # client.  The same rules about trailing "/" apply to ScriptAlias
    # directives as to Alias.
    #
    ScriptAlias /cgi-bin/ "/Applications/MAMP/cgi-bin/"

    Alias /perl/ "/Applications/MAMP/cgi-bin/"

    <IfModule perl_module>
        PerlModule ModPerl::Registry
        <Location /perl>
            SetHandler perl-script
            PerlResponseHandler ModPerl::Registry
            PerlOptions +ParseHeaders
            Options +ExecCGI
        </Location>
    </IfModule>
</IfModule>

<IfModule cgid_module>
    #
    # ScriptSock: On threaded servers, designate the path to the UNIX
    # socket used to communicate with the CGI daemon of mod_cgid.
    #
    #Scriptsock logs/cgisock
</IfModule>

<Directory "/Applications/MAMP/cgi-bin">
    AllowOverride None
    Options None
    Order allow,deny
    Allow from all
</Directory>

DefaultType text/plain

<IfModule mime_module>
    TypesConfig /Applications/MAMP/conf/apache/mime.types

    AddType application/x-compress .Z
    AddType application/x-gzip .gz .tgz

    AddHandler cgi-script .cgi .pl

</IfModule>

<IfModule mime_magic_module>
    MIMEMagicFile /Applications/MAMP/conf/apache/magic
</IfModule>


# Server-pool management (MPM specific)
#Include /Applications/MAMP/conf/apache/extra/httpd-mpm.conf

# Multi-language error messages
#Include /Applications/MAMP/conf/apache/extra/httpd-multilang-errordoc.conf

# Fancy directory listings
#Include /Applications/MAMP/conf/apache/extra/httpd-autoindex.conf

# Language settings
#Include /Applications/MAMP/conf/apache/extra/httpd-languages.conf

# User home directories
#Include /Applications/MAMP/conf/apache/extra/httpd-userdir.conf

# Real-time info on requests and configuration
#Include /Applications/MAMP/conf/apache/extra/httpd-info.conf

# Virtual hosts
#Include /Applications/MAMP/conf/apache/extra/httpd-vhosts.conf

# Local access to the Apache HTTP Server Manual
#Include /Applications/MAMP/conf/apache/extra/httpd-manual.conf

# Distributed authoring and versioning (WebDAV)
#Include /Applications/MAMP/conf/apache/extra/httpd-dav.conf

# Various default settings
#Include /Applications/MAMP/conf/apache/extra/httpd-default.conf

# Secure (SSL/TLS) connections
Include /Applications/MAMP/conf/apache/extra/httpd-ssl.conf
#
# Note: The following must must be present to support
#       starting without SSL on platforms with no /dev/random equivalent
#       but a statically compiled-in mod_ssl.
#
<IfModule ssl_module>
SSLRandomSeed startup file:/dev/urandom 1024
SSLRandomSeed connect file:/dev/urandom 1024

#
# Uncomment the next line if Apache should not accept SSLv3 connections, to learn more google for "POODLE SSLv3".
# SSLProtocol All -SSLv2 -SSLv3 
</IfModule>

link

#
# This is the Apache server configuration file providing SSL support.
# It contains the configuration directives to instruct the server how to
# serve pages over an https connection. For detailing information about these 
# directives see <URL:http://httpd.apache.org/docs/2.2/mod/mod_ssl.html>
# 
# Do NOT simply read the instructions in here without understanding
# what they do.  They're here only as hints or reminders.  If you are unsure
# consult the online docs. You have been warned.  
#

#
# Pseudo Random Number Generator (PRNG):
# Configure one or more sources to seed the PRNG of the SSL library.
# The seed data should be of good random quality.
# WARNING! On some platforms /dev/random blocks if not enough entropy
# is available. This means you then cannot use the /dev/random device
# because it would lead to very long connection times (as long as
# it requires to make more entropy available). But usually those
# platforms additionally provide a /dev/urandom device which doesn't
# block. So, if available, use this one instead. Read the mod_ssl User
# Manual for more details.
#
#SSLRandomSeed startup file:/dev/random  512
#SSLRandomSeed startup file:/dev/urandom 512
#SSLRandomSeed connect file:/dev/random  512
#SSLRandomSeed connect file:/dev/urandom 512


#
# When we also provide SSL we have to listen to the 
# standard HTTP port (see above) and to the HTTPS port
#
# Note: Configurations that use IPv6 but not IPv4-mapped addresses need two
#       Listen directives: "Listen [::]:443" and "Listen 0.0.0.0:443"
#
Listen 443

##
##  SSL Global Context
##
##  All SSL configuration in this context applies both to
##  the main server and all SSL-enabled virtual hosts.
##

#
#   Some MIME-types for downloading Certificates and CRLs
#
AddType application/x-x509-ca-cert .crt
AddType application/x-pkcs7-crl    .crl

#   Pass Phrase Dialog:
#   Configure the pass phrase gathering process.
#   The filtering dialog program ('builtin' is a internal
#   terminal dialog) has to provide the pass phrase on stdout.
SSLPassPhraseDialog  builtin

#   Inter-Process Session Cache:
#   Configure the SSL Session Cache: First the mechanism 
#   to use and second the expiring timeout (in seconds).
#SSLSessionCache         "dbm:/Applications/MAMP/Library/logs/ssl_scache"
SSLSessionCache        "shmcb:/Applications/MAMP/Library/logs/ssl_scache(512000)"
SSLSessionCacheTimeout  300

#   Semaphore:
#   Configure the path to the mutual exclusion semaphore the
#   SSL engine uses internally for inter-process synchronization. 
SSLMutex  "file:/Applications/MAMP/Library/logs/ssl_mutex"

##
## SSL Virtual Host Context
##

<VirtualHost _default_:443>

#   General setup for the virtual host
DocumentRoot "/Users/usuario/Sites/usuariocloud/client"
ServerName localhost:443
ServerAdmin [email protected]
ErrorLog "/Applications/MAMP/Library/logs/error_log"
TransferLog "/Applications/MAMP/Library/logs/access_log"

#   SSL Engine Switch:
#   Enable/Disable SSL for this virtual host.
SSLEngine on

#   SSL Cipher Suite:
#   List the ciphers that the client is permitted to negotiate.
#   See the mod_ssl documentation for a complete list.

# Uncomment the next line if Apache should not accept SSLv3 connections, to learn more google for "POODLE SSLv3".
# SSLCipherSuite ALL:!ADH:!EXPORT56:RC4+RSA:+HIGH:+MEDIUM:+LOW:+SSLv2:-SSLv3:+EXP:+eNULL

# Comment the next line (and uncomment the line above) if Apache should not accept SSLv3 connections, to learn more google for "POODLE SSLv3".
SSLCipherSuite ALL:!ADH:!EXPORT56:RC4+RSA:+HIGH:+MEDIUM:+LOW:+SSLv2:+EXP:+eNULL

#   Server Certificate:
#   Point SSLCertificateFile at a PEM encoded certificate.  If
#   the certificate is encrypted, then you will be prompted for a
#   pass phrase.  Note that a kill -HUP will prompt again.  Keep
#   in mind that if you have both an RSA and a DSA certificate you
#   can configure both in parallel (to also allow the use of DSA
#   ciphers, etc.)
SSLCertificateFile "/Applications/MAMP/conf/apache/extra/ssl/privateserver.crt"
#SSLCertificateFile "/Applications/MAMP/conf/apache/server-dsa.crt"

#   Server Private Key:
#   If the key is not combined with the certificate, use this
#   directive to point at the key file.  Keep in mind that if
#   you've both a RSA and a DSA private key you can configure
#   both in parallel (to also allow the use of DSA ciphers, etc.)
SSLCertificateKeyFile "/Applications/MAMP/conf/apache/extra/ssl/privateserver.key"
#SSLCertificateKeyFile "/Applications/MAMP/conf/apache/server-dsa.key"

#   Server Certificate Chain:
#   Point SSLCertificateChainFile at a file containing the
#   concatenation of PEM encoded CA certificates which form the
#   certificate chain for the server certificate. Alternatively
#   the referenced file can be the same as SSLCertificateFile
#   when the CA certificates are directly appended to the server
#   certificate for convinience.
#SSLCertificateChainFile "/Applications/MAMP/conf/apache/server-ca.crt"

#   Certificate Authority (CA):
#   Set the CA certificate verification path where to find CA
#   certificates for client authentication or alternatively one
#   huge file containing all of them (file must be PEM encoded)
#   Note: Inside SSLCACertificatePath you need hash symlinks
#         to point to the certificate files. Use the provided
#         Makefile to update the hash symlinks after changes.
#SSLCACertificatePath "/Applications/MAMP/conf/apache/ssl.crt"
#SSLCACertificateFile "/Applications/MAMP/conf/apache/ssl.crt/ca-bundle.crt"

#   Certificate Revocation Lists (CRL):
#   Set the CA revocation path where to find CA CRLs for client
#   authentication or alternatively one huge file containing all
#   of them (file must be PEM encoded)
#   Note: Inside SSLCARevocationPath you need hash symlinks
#         to point to the certificate files. Use the provided
#         Makefile to update the hash symlinks after changes.
#SSLCARevocationPath "/Applications/MAMP/conf/apache/ssl.crl"
#SSLCARevocationFile "/Applications/MAMP/conf/apache/ssl.crl/ca-bundle.crl"

#   Client Authentication (Type):
#   Client certificate verification type and depth.  Types are
#   none, optional, require and optional_no_ca.  Depth is a
#   number which specifies how deeply to verify the certificate
#   issuer chain before deciding the certificate is not valid.
#SSLVerifyClient require
#SSLVerifyDepth  10

#   Access Control:
#   With SSLRequire you can do per-directory access control based
#   on arbitrary complex boolean expressions containing server
#   variable checks and other lookup directives.  The syntax is a
#   mixture between C and Perl.  See the mod_ssl documentation
#   for more details.
#<Location />
#SSLRequire (    %{SSL_CIPHER} !~ m/^(EXP|NULL)/ \
#            and %{SSL_CLIENT_S_DN_O} eq "Snake Oil, Ltd." \
#            and %{SSL_CLIENT_S_DN_OU} in {"Staff", "CA", "Dev"} \
#            and %{TIME_WDAY} >= 1 and %{TIME_WDAY} <= 5 \
#            and %{TIME_HOUR} >= 8 and %{TIME_HOUR} <= 20       ) \
#           or %{REMOTE_ADDR} =~ m/^192\.76\.162\.[0-9]+$/
#</Location>

#   SSL Engine Options:
#   Set various options for the SSL engine.
#   o FakeBasicAuth:
#     Translate the client X.509 into a Basic Authorisation.  This means that
#     the standard Auth/DBMAuth methods can be used for access control.  The
#     user name is the 'one line' version of the client's X.509 certificate.
#     Note that no password is obtained from the user. Every entry in the user
#     file needs this password: 'xxj31ZMTZzkVA'.
#   o ExportCertData:
#     This exports two additional environment variables: SSL_CLIENT_CERT and
#     SSL_SERVER_CERT. These contain the PEM-encoded certificates of the
#     server (always existing) and the client (only existing when client
#     authentication is used). This can be used to import the certificates
#     into CGI scripts.
#   o StdEnvVars:
#     This exports the standard SSL/TLS related 'SSL_*' environment variables.
#     Per default this exportation is switched off for performance reasons,
#     because the extraction step is an expensive operation and is usually
#     useless for serving static content. So one usually enables the
#     exportation for CGI and SSI requests only.
#   o StrictRequire:
#     This denies access when "SSLRequireSSL" or "SSLRequire" applied even
#     under a "Satisfy any" situation, i.e. when it applies access is denied
#     and no other module can change it.
#   o OptRenegotiate:
#     This enables optimized SSL connection renegotiation handling when SSL
#     directives are used in per-directory context. 
#SSLOptions +FakeBasicAuth +ExportCertData +StrictRequire
<FilesMatch "\.(cgi|shtml|phtml|php)$">
    SSLOptions +StdEnvVars
</FilesMatch>
<Directory "/Applications/MAMP/Library/cgi-bin">
    SSLOptions +StdEnvVars
</Directory>

#   SSL Protocol Adjustments:
#   The safe and default but still SSL/TLS standard compliant shutdown
#   approach is that mod_ssl sends the close notify alert but doesn't wait for
#   the close notify alert from client. When you need a different shutdown
#   approach you can use one of the following variables:
#   o ssl-unclean-shutdown:
#     This forces an unclean shutdown when the connection is closed, i.e. no
#     SSL close notify alert is send or allowed to received.  This violates
#     the SSL/TLS standard but is needed for some brain-dead browsers. Use
#     this when you receive I/O errors because of the standard approach where
#     mod_ssl sends the close notify alert.
#   o ssl-accurate-shutdown:
#     This forces an accurate shutdown when the connection is closed, i.e. a
#     SSL close notify alert is send and mod_ssl waits for the close notify
#     alert of the client. This is 100% SSL/TLS standard compliant, but in
#     practice often causes hanging connections with brain-dead browsers. Use
#     this only for browsers where you know that their SSL implementation
#     works correctly. 
#   Notice: Most problems of broken clients are also related to the HTTP
#   keep-alive facility, so you usually additionally want to disable
#   keep-alive for those clients, too. Use variable "nokeepalive" for this.
#   Similarly, one has to force some clients to use HTTP/1.0 to workaround
#   their broken HTTP/1.1 implementation. Use variables "downgrade-1.0" and
#   "force-response-1.0" for this.
BrowserMatch ".*MSIE.*" \
         nokeepalive ssl-unclean-shutdown \
         downgrade-1.0 force-response-1.0

#   Per-Server Logging:
#   The home of a custom SSL log file. Use this when you want a
#   compact non-error SSL logfile on a virtual host basis.
CustomLog "/Applications/MAMP/Library/logs/ssl_request_log" \
          "%t %h %{SSL_PROTOCOL}x %{SSL_CIPHER}x \"%r\" %b"

</VirtualHost>                                  

link

#
# Virtual Hosts
#
# If you want to maintain multiple domains/hostnames on your
# machine you can setup VirtualHost containers for them. Most configurations
# use only name-based virtual hosts so the server doesn't need to worry about
# IP addresses. This is indicated by the asterisks in the directives below.
#
# Please see the documentation at 
# <URL:http://httpd.apache.org/docs/2.2/vhosts/>
# for further details before you try to setup virtual hosts.
#
# You may use the command line option '-S' to verify your virtual host
# configuration.

#
# Use name-based virtual hosting.
#
NameVirtualHost *:80

#
# VirtualHost example:
# Almost any Apache directive may go into a VirtualHost container.
# The first VirtualHost section is used for all requests that do not
# match a ServerName or ServerAlias in any <VirtualHost> block.
#
<VirtualHost *:80>
    ServerAdmin [email protected]
    DocumentRoot "/Applications/MAMP/Library/docs/dummy-host.example.com"
    ServerName dummy-host.example.com
    ServerAlias www.dummy-host.example.com
    ErrorLog "logs/dummy-host.example.com-error_log"
    CustomLog "logs/dummy-host.example.com-access_log" common
</VirtualHost>

<VirtualHost *:80>
    ServerAdmin [email protected]
    DocumentRoot "/Applications/MAMP/Library/docs/dummy-host2.example.com"
    ServerName dummy-host2.example.com
    ErrorLog "logs/dummy-host2.example.com-error_log"
    CustomLog "logs/dummy-host2.example.com-access_log" common
</VirtualHost>

e o controller.wsgi

#! /usr/bin/python

    # Library Imports
import json, cgi, sys, os

path =  os.path.dirname(__file__)

if path not in sys.path:
    sys.path.append(path)

# Own Libraries
from petition_solver.solver import Solver

def application(env, resp):
    response = {    "response": "fail", 
                    "error" : """Expecting ?Json=
                                {
                                    "function":"functionName",
                                    "entity":"entityName",
                                    "params":
                                    {
                                        "param1":"value1", 
                                        "param2":"value2", 
                                        "paramn":"value n"
                                    }
                                }""".replace('\r', ' ').replace('\n', ' ').replace('\t', '')   
                }

    # Read Params

    form = cgi.FieldStorage(fp=env['wsgi.input'], environ=env)

    if form:

        userAgent = env["HTTP_USER_AGENT"] if "HTTP_USER_AGENT" in env else ""
        param_json = form['json'].value

        petition = json.loads(param_json)

        if('file' in form and "params" in petition):
            param_file = form['file']

            if(isinstance(param_file, list)):
                petition['params']['files'] = []
                for f in param_file:
                    filename = unicode(f.filename, 'utf-8')
                    petition['params']['files'].append({"originalName" : filename, "file" : f.file.read()})
            else:
                petition['params']['file'] = param_file.file.read()
                filename = unicode(param_file.filename, 'utf-8')
                petition['params']['originalName'] = filename

        solver = Solver()
        response = solver.solvePetition(petition, userAgent=userAgent)

    if (response and "download" in response and response["download"]):

        detail = response["file"]["storage"]

        mime = detail["mime"].decode('utf-8')
        name = detail["originalName"].encode("ascii", 'replace')
        data = detail["file"]

        resp('200 OK',[('Content-type', '{0}'.format(mime)),('Content-disposition', 'attachment; filename*=UTF-8''{0}; filename={0}'.format(name))])
        yield data
    else:
        resp('200 OK',[('Content-type', 'text/html;charset=utf-8')])
        yield json.dumps(response)

Eu não entendo meu erro porque quando eu mudo

WSGIScriptAlias / cgi-bin / "Usuários / usuario / Sites / Server /"

WSGIScriptAlias / "Usuários / usuario / Sites / Server / controller.wsgi"

no localhost show controller.wsgi

    
por Colours123 08.06.2015 / 16:51

0 respostas