Erros estranhos em uma unidade SSD Ubuntu 10.04

Question

Erros estranhos em uma unidade SSD Ubuntu 10.04

#1 resposta do (3 votos)
#2 resposta do (1 votos)

2

Obtendo erros muito estranhos neste drve. Não consigo descobrir de onde vem.

ATA device, with non-removable media
Model Number:       KINGSTON SV100S264G                     
Serial Number:      08AAB0016979        
Firmware Revision:  D100811a
Transport:          Serial, ATA8-AST, SATA 1.0a, SATA II 
                    Extensions, SATA Rev 2.5, SATA Rev 2.6

Saída Dmesg

[2237481.532836] ata1.00: exception Emask 0x0 SAct 0x1 SErr 0x0 action 0x0
[2237481.533053] ata1.00: irq_stat 0x40000008
[2237481.533414] ata1.00: failed command: READ FPDMA QUEUED
[2237481.533867] ata1.00: cmd 60/08:00:10:0a:01/00:00:01:00:00/40 tag 0 ncq 4096 in
[2237481.533867]          res 41/40:00:10:0a:01/00:00:01:00:00/40 Emask 0x409 (media error) <F>
[2237481.534802] ata1.00: status: { DRDY ERR }
[2237481.535259] ata1.00: error: { UNC }
[2237481.536197] ata1.00: configured for UDMA/100
[2237481.536204] ata1: EH complete
[2237481.536658] ata1.00: exception Emask 0x0 SAct 0x1 SErr 0x0 action 0x0
[2237481.536890] ata1.00: irq_stat 0x40000008
[2237481.537240] ata1.00: failed command: READ FPDMA QUEUED
[2237481.537692] ata1.00: cmd 60/08:00:10:0a:01/00:00:01:00:00/40 tag 0 ncq 4096 in
[2237481.537693]          res 41/40:00:10:0a:01/00:00:01:00:00/40 Emask 0x409 (media error) <F>
[2237481.538620] ata1.00: status: { DRDY ERR }
[2237481.539081] ata1.00: error: { UNC }
[2237481.540014] ata1.00: configured for UDMA/100
[2237481.540020] ata1: EH complete
[2237481.540476] ata1.00: exception Emask 0x0 SAct 0x1 SErr 0x0 action 0x0
[2237481.540712] ata1.00: irq_stat 0x40000008
[2237481.541057] ata1.00: failed command: READ FPDMA QUEUED
[2237481.541513] ata1.00: cmd 60/08:00:10:0a:01/00:00:01:00:00/40 tag 0 ncq 4096 in
[2237481.541513]          res 41/40:00:10:0a:01/00:00:01:00:00/40 Emask 0x409 (media error) <F>
[2237481.542440] ata1.00: status: { DRDY ERR }
[2237481.542904] ata1.00: error: { UNC }
[2237481.543843] ata1.00: configured for UDMA/100
[2237481.543851] sd 1:0:0:0: [sda] Unhandled sense code
[2237481.543853] sd 1:0:0:0: [sda] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[2237481.543857] sd 1:0:0:0: [sda] Sense Key : Medium Error [current] [descriptor]
[2237481.543861] Descriptor sense data with sense descriptors (in hex):
[2237481.543863]         72 03 11 04 00 00 00 0c 00 0a 80 00 00 00 00 00 
[2237481.543873]         01 01 0a 10 
[2237481.543877] sd 1:0:0:0: [sda] Add. Sense: Unrecovered read error - auto reallocate failed
[2237481.543881] sd 1:0:0:0: [sda] CDB: Read(10): 28 00 01 01 0a 10 00 00 08 00
[2237481.543890] end_request: I/O error, dev sda, sector 16845328
[2237481.544100] ata1: EH complete

smartctl -d ata -a / dev / sda

Error 463 occurred at disk power-on lifetime: 1279 hours (53 days + 7 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  40 51 00 10 0a 40 e3  Error: UNC at LBA = 0x03400a10 = 54528528

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  c8 00 f8 10 0a 40 e3 08   1d+16:13:20.504  READ DMA
  ef 10 02 00 00 00 a0 08   1d+16:13:20.504  SET FEATURES [Reserved for Serial ATA]
  ec 00 00 00 00 00 a0 08   1d+16:13:20.504  IDENTIFY DEVICE
  ef 03 45 00 00 00 a0 08   1d+16:13:20.504  SET FEATURES [Set transfer mode]
  ef 10 02 00 00 00 a0 08   1d+16:13:20.504  SET FEATURES [Reserved for Serial ATA]

Error 462 occurred at disk power-on lifetime: 1279 hours (53 days + 7 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  40 51 00 10 0a 40 e3  Error: UNC at LBA = 0x03400a10 = 54528528

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  c8 00 f8 10 0a 40 e3 08   1d+16:13:20.504  READ DMA
  ef 10 02 00 00 00 a0 08   1d+16:13:20.504  SET FEATURES [Reserved for Serial ATA]
  ec 00 00 00 00 00 a0 08   1d+16:13:20.504  IDENTIFY DEVICE
  ef 03 45 00 00 00 a0 08   1d+16:13:20.504  SET FEATURES [Set transfer mode]
  ef 10 02 00 00 00 a0 08   1d+16:13:20.504  SET FEATURES [Reserved for Serial ATA]

Error 461 occurred at disk power-on lifetime: 1279 hours (53 days + 7 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  40 51 00 10 0a 40 e3  Error: UNC at LBA = 0x03400a10 = 54528528

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  c8 00 f8 10 0a 40 e3 08   1d+16:13:20.504  READ DMA
  ef 10 02 00 00 00 a0 08   1d+16:13:20.504  SET FEATURES [Reserved for Serial ATA]
  ec 00 00 00 00 00 a0 08   1d+16:13:20.504  IDENTIFY DEVICE
  ef 03 45 00 00 00 a0 08   1d+16:13:20.504  SET FEATURES [Set transfer mode]
  ef 10 02 00 00 00 a0 08   1d+16:13:20.504  SET FEATURES [Reserved for Serial ATA]

Error 460 occurred at disk power-on lifetime: 1279 hours (53 days + 7 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  40 51 00 10 0a 40 e3  Error: UNC at LBA = 0x03400a10 = 54528528

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  c8 00 f8 10 0a 40 e3 08   1d+16:13:20.504  READ DMA
  ef 10 02 00 00 00 a0 08   1d+16:13:20.504  SET FEATURES [Reserved for Serial ATA]
  ec 00 00 00 00 00 a0 08   1d+16:13:20.504  IDENTIFY DEVICE
  ef 03 45 00 00 00 a0 08   1d+16:13:20.504  SET FEATURES [Set transfer mode]
  ef 10 02 00 00 00 a0 08   1d+16:13:20.504  SET FEATURES [Reserved for Serial ATA]

Error 459 occurred at disk power-on lifetime: 1279 hours (53 days + 7 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  40 51 00 10 0a 40 e3  Error: UNC at LBA = 0x03400a10 = 54528528

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  c8 00 f8 10 0a 40 e3 08   1d+16:13:20.504  READ DMA
  ef 10 02 00 00 00 a0 08   1d+16:13:20.504  SET FEATURES [Reserved for Serial ATA]
  ec 00 00 00 00 00 a0 08   1d+16:13:20.504  IDENTIFY DEVICE
  ef 03 45 00 00 00 a0 08   1d+16:13:20.504  SET FEATURES [Set transfer mode]
  ef 10 02 00 00 00 a0 08   1d+16:13:20.504  SET FEATURES [Reserved for Serial ATA]

SMART Self-test log structure revision number 1
No self-tests have been logged.  [To run self-tests, use: smartctl -t]

ssd ubuntu-10.04

por Disco 11.05.2011 / 18:10

2 respostas

3

Atualização de firmware para a versão encontrada no site da Kingston que termina em 225a para este modelo de SSD e voilà;)

por 25.07.2011 / 16:32

Tags ssd ubuntu-10.04

Preso com laptop de tela rachada estendida desktop - como reverter para exibição normal? Como posso alterar a fonte unicode do emacs?

score 1 · Accepted Answer

Eu tive um problema muito semelhante que agora parece estar resolvido. Não tenho idéia do que esses erros significam, mas foi o que aconteceu comigo de qualquer maneira.

Computador Asus + Z99H laptop. Instalando o Ubuntu 11.04. Tive algumas centenas de shows de vídeo e uma partição do Windows XP.

Inicialmente instalei o Ubuntu em uma nova partição e usei isso como o SO de particionamento e transferência de arquivos. Instalar correu bem. Depois de transferir dados da partição do Windows, instalei o Ubuntu na partição original do Windows, pretendendo que esta seria a instalação final.

Durante o processo de instalação, corri o dedo ao longo da dobradiça do laptop, limpando um pouco de poeira e acidentalmente toquei no interruptor de energia muito sensível, iniciando um desligamento.

Eu reiniciei a instalação, MAS NÃO REFORMATO como eu não acho que era necessário. Instalar parecia ir OK, mas só poderia começar no modo de baixa gráfica. Encontrou os erros acima.

Reinstalado, desta vez reformatando a partição e mantendo minhas luvas longe do interruptor de energia. Tudo parece bem agora.