netsh import não funciona

Question

Estou tentando usar o netsh para exportar e importar minhas configurações de rede. Consegui exportar minhas configurações usando o comando:

netsh -c interface dump > c:\settings.txt

O arquivo é criado, tudo ok, mas quando tento importar o arquivo, use:

netsh -f c:\settings.txt

Eu recebo o seguinte:

Resetting Global, OK!
Resetting , failed.
Access is denied.

Restart the computer to complete this action.
Resetting Interface, OK!
Resetting , failed.
Access is denied.

Restart the computer to complete this action.
The following command was not found: reset.

Reset of all TCP parameters OK!

The congestionprovider parameter can be set using the
'netsh int tcp set supplemental' command.
The parameter is incorrect.

The following command was not found: reset.

Estou executando o prompt de comando com privilégios de administrador em um Windows 8.

Eu preciso disso porque estou trabalhando em mais locais e em um deles preciso definir algumas configurações de proxy e quero automatizar isso de alguma forma.

EDIT: Este é o arquivo de configurações:

#========================
# Interface configuration
#========================
pushd interface 
popd
# End of interface configuration

# ----------------------------------
# IPHTTPS Configuration
# ----------------------------------
pushd interface httpstunnel
reset
popd
# End of IPHTTPS configuration

# ----------------------------------
# IPv4 Configuration
# ----------------------------------
pushd interface ipv4
reset
set global icmpredirects=enabled
popd
# End of IPv4 configuration

# ----------------------------------
# IPv6 Configuration
# ----------------------------------
pushd interface ipv6
reset
set interface interface="Ethernet" forwarding=enabled advertise=enabled nud=enabled ignoredefaultroutes=disabled
set interface interface="Wi-Fi" forwarding=enabled advertise=enabled nud=enabled ignoredefaultroutes=disabled
set interface interface="Bluetooth Network Connection" forwarding=enabled advertise=enabled nud=enabled ignoredefaultroutes=disabled
set interface interface="(my proxy goes here)" forwarding=enabled advertise=enabled nud=enabled ignoredefaultroutes=disabled
set interface interface="Teredo Tunneling Pseudo-Interface" forwarding=enabled advertise=enabled mtu=1280 nud=enabled ignoredefaultroutes=disabled
set interface interface="Local Area Connection* 12" forwarding=enabled advertise=enabled nud=enabled ignoredefaultroutes=disabled
set interface interface="isatap.{A049BA26-6AB7-4880-9D9C-1CD3E579C8E0}" forwarding=enabled advertise=enabled nud=enabled ignoredefaultroutes=disabled
set interface interface="isatap.{1B39EAEE-CBD8-406C-928F-FB0F83DC49E5}" forwarding=enabled advertise=enabled nud=enabled ignoredefaultroutes=disabled
popd
# End of IPv6 configuration

# ----------------------------------
# ISATAP Configuration
# ----------------------------------
pushd interface isatap
popd
# End of ISATAP configuration

# ----------------------------------
# 6to4 Configuration
# ----------------------------------
pushd interface 6to4
reset
popd
# End of 6to4 configuration

# ----------------------------------
# ISATAP Configuration
# ----------------------------------
pushd interface isatap
popd
# End of ISATAP configuration

#========================
# Port Proxy configuration
#========================
pushd interface portproxy
reset
popd
# End of Port Proxy configuration

# ----------------------------------
# TCP Configuration
# ----------------------------------
pushd interface tcp
reset
set global rss=enabled chimney=disabled autotuninglevel=normal congestionprovider=none ecncapability=disabled timestamps=disabled netdma=disabled dca=disabled initialrto=3000 rsc=enabled
popd
# End of TCP configuration

# ----------------------------------
# Teredo Configuration
# ----------------------------------
pushd interface teredo
set state type=client servername=teredo.ipv6.microsoft.com. servervirtualip=0.0.0.0
popd
# End of Teredo configuration

# ----------------------------------
# 6to4 Configuration
# ----------------------------------
pushd interface 6to4
reset
popd
# End of 6to4 configuration

    

Answer 1

Depois de analisar o link alguns minutos, eu estou pensando que talvez devesse tentar algo como

"netsh -c Interface -f C: \ settings.txt".

Se isso não funcionar, o link indica "Existem diferenças funcionais entre os comandos netsh no Windows Server® 2003, Windows Server® 2008 e Windows Server® 2008 R2 ", & inclui alguns links para outras informações, incluindo várias informações sobre permissões. Essa jornada começa com o ... cc732279 ... url acima.