A instalação do servidor pool.ntp.org
time é recomendada pelo
manual
pelo seguinte comando:
w32tm /config /update /manualpeerlist:"0.pool.ntp.org,0x8 1.pool.ntp.org,0x8 2.pool.ntp.org,0x8 3.pool.ntp.org,0x8" /syncfromflags:MANUAL
Eu estava seguindo as instruções da segunda resposta deste question quando o seguinte apareceu quando tentei sincronizar o Windows Time para pool.ntp.org
:
C:\WINDOWS\system32>w32tm /resync
Sending resync command to local computer
The computer did not resync because no time data was available.
O seguinte é a configuração:
C:\WINDOWS\system32>w32tm /query /configuration
[Configuration]
EventLogFlags: 2 (Local)
AnnounceFlags: 5 (Local)
TimeJumpAuditOffset: 28800 (Local)
MinPollInterval: 10 (Local)
MaxPollInterval: 15 (Local)
MaxNegPhaseCorrection: 54000 (Local)
MaxPosPhaseCorrection: 54000 (Local)
MaxAllowedPhaseOffset: 1 (Local)
FrequencyCorrectRate: 4 (Local)
PollAdjustFactor: 5 (Local)
LargePhaseOffset: 50000000 (Local)
SpikeWatchPeriod: 900 (Local)
LocalClockDispersion: 10 (Local)
HoldPeriod: 5 (Local)
PhaseCorrectRate: 1 (Local)
UpdateInterval: 360000 (Local)
[TimeProviders]
NtpClient (Local)
DllName: C:\WINDOWS\SYSTEM32\w32time.DLL (Local)
Enabled: 1 (Local)
InputProvider: 1 (Local)
AllowNonstandardModeCombinations: 1 (Local)
ResolvePeerBackoffMinutes: 15 (Local)
ResolvePeerBackoffMaxTimes: 7 (Local)
CompatibilityFlags: 2147483648 (Local)
EventLogFlags: 1 (Local)
LargeSampleSkew: 3 (Local)
SpecialPollInterval: 32768 (Local)
Type: NTP (Local)
NtpServer: pool.ntp.org (Local)
NtpServer (Local)
DllName: C:\WINDOWS\SYSTEM32\w32time.DLL (Local)
Enabled: 0 (Local)
InputProvider: 0 (Local)
Eu tentei cancelar a inscrição e registrar novamente o serviço de tempo do Windows, mas não adiantou.
Como resolvo este problema?
Editar: a saída de w32tm /monitor /computers:pool.ntp.org
:
pool.ntp.org[27.124.125.250:123]:
ICMP: 80ms delay
NTP: +1.4521260s offset from local clock
RefID: ntp.waia.asn.au [218.100.43.70]
Stratum: 2
Warning:
Reverse name resolution is best effort. It may not be
correct since RefID field in time packets differs across
NTP implementations and may not be using IP addresses.
Screenshot de Computer\HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\w32time\Parameters
: