Eu tenho 2 hdds que começaram a morrer lentamente (baixa velocidade, altos tempos de resposta, alto tempo de atividade, acumulando contagens do setor realocadas) em um período de uma semana. Pode ser por causa de sobrecarga de energia ou PSU com defeito? Eu suponho que a oscilação de energia seria apenas fritar, pode ser o problema com o desligamento repentino?
Informação SMART:
01 Raw Read Error Rate 6 99 88 158946163 OK: Value is normal
03 Spinup Time 0 94 92 0 OK: Always passes
04 Start/Stop Count 20 97 97 3218 OK: Value is normal
05 Reallocated Sector Count 36 68 68 1317 OK: Value is normal
07 Seek Error Rate 30 87 60 562871335 OK: Value is normal
09 Power-On Time Count 0 58 58 37286 OK: Always passes
0A Spinup Retry Count 97 100 100 0 OK: Value is normal
0C Power Cycle Count 20 99 99 1588 OK: Value is normal
B7 <vendor-specific> 0 100 100 0 OK: Always passes
B8 End-to-End Error 99 100 100 0 OK: Value is normal
BB Reported Uncorrectable Errors 0 1 1 2610 OK: Always passes
BC Command Timeout 0 100 99 1114129 OK: Always passes
BD High Fly Writes 0 100 100 0 OK: Always passes
BE Airflow Temperature 45 60 45 40 OK: Value is normal
C2 Temperature 0 40 55 40 OK: Always passes
C3 Hardware ECC Recovered 0 40 22 158946163 OK: Always passes
C5 Current Pending Sector Count 0 100 100 32 OK: Always passes
C6 Offline Uncorrectable Sector Count 0 100 100 32 OK: Always passes
C7 Ultra ATA CRC Error Rate 0 200 200 0 OK: Always passes
F0 Head Flying Hours 0 100 253 41456 OK: Always passes
F1 Total Host Writes 0 100 253 1140260453 OK: Always passes
F2 Total Host Reads 0 100 253 321833633 OK: Always passes
Tags hard-drive power-supply