Perda de energia durante a alteração do nível de RAID do mdadm

Question

De acordo com o título, meu mdadm RAID estava em processo de migração do nível 6 para 5 quando a energia foi interrompida momentaneamente. Infelizmente, não posso mais remontar a matriz - o comando assemble gera o seguinte:

mdadm --assemble --force --run --verbose /dev/md0
mdadm: looking for devices for /dev/md0
mdadm: no RAID superblock on /dev/sde1
mdadm: /dev/sde1 has wrong uuid.
mdadm: no RAID superblock on /dev/sde
mdadm: /dev/sde has wrong uuid.
mdadm: no RAID superblock on /dev/sdd1
mdadm: /dev/sdd1 has wrong uuid.
mdadm: no RAID superblock on /dev/sdd
mdadm: /dev/sdd has wrong uuid.
mdadm: cannot open device /dev/sdc5: Device or resource busy
mdadm: /dev/sdc5 has wrong uuid.
mdadm: no RAID superblock on /dev/sdc2
mdadm: /dev/sdc2 has wrong uuid.
mdadm: cannot open device /dev/sdc1: Device or resource busy
mdadm: /dev/sdc1 has wrong uuid.
mdadm: cannot open device /dev/sdc: Device or resource busy
mdadm: /dev/sdc has wrong uuid.
mdadm: no RAID superblock on /dev/sda
mdadm: /dev/sda has wrong uuid.
mdadm: /dev/sdb is identified as a member of /dev/md0, slot 2.
mdadm: /dev/sda1 is identified as a member of /dev/md0, slot 3.
mdadm:/dev/md0 has an active reshape - checking if critical section needs to be restored
mdadm: Failed to find backup of critical section
mdadm: Failed to restore critical section for reshape, sorry.
      Possibly you needed to specify the --backup-file

A matriz estava em / dev / sda1 / dev / sdb / dev / sdd1 / dev / sde1 - Existe alguma maneira de restaurá-lo?