Interface Netsh ip set dns register

Question

Um dos parâmetros do comando Netsh interface ip set dns é register . Qual é o seu objetivo? Eu não entendo as explicações dadas na ajuda. Qual valor é definido para este parâmetro se eu definir a configuração de DNS de um adaptador de rede através da GUI do Windows?

Ajuda do comando:

C:\Users\User>netsh int ipv4 set dns help

Usage: set dnsservers [name=]<string> [source=]dhcp|static
             [[address=]<IP address>|none]
             [[register=]none|primary|both]
             [[validate=]yes|no]

Parameters:

  Tag            Value
  name         - The name or index of the interface.
  source       - One of the following values:
                 dhcp: Sets DHCP as the source for configuring DNS
                       servers for the specific interface.
                 static: Sets the source for configuring DNS servers
                         to local static configuration.
  address      - One of the following values:
                 <IP address>: An IP address for a DNS server.
                 none: Clears the list of DNS servers.
  register     - One of the following values:
                 none: Disables Dynamic DNS registration.
                 primary: Register under the primary DNS suffix only.
                 both: Register under both the primary DNS suffix, as
                       well as under the connection-specific suffix.
  validate     - Specifies whether validation of the DNS server setting
                 will be performed. The value is yes by default.

Remarks: Sets DNS server configuration to either DHCP or static mode. Only
         when source is 'static', is the 'addr' option also available for
         configuring a static list of DNS server IP addresses for the
         specified interface. If Validate switch is yes, then
         the newly set DNS server is validated.

Examples:

   set dnsservers name="Wired Ethernet Connection" source=dhcp
   set dnsservers "Wired Ethernet Connection" static 10.0.0.1 primary

    

Answer 1

Ajusta os valores de DNS nas propriedades do IPV4 para a interface especificada.

netsh interface ipv4 set dnsserver "Ethernet" static address=192.168.1.1 register=primary

Define isso quando exibido no Painel de controle \ Todos os itens do painel de controle \ Conexões de rede:

Veja link para mais exemplos.