dnsmasq-dhcp em openWRT ignora o endereço IP oferecido (“ID do servidor errado”)

0

Estou tentando conectar meu dispositivo OpenWRT como um cliente a um roteador via cabo ethernet. Na maioria das redes, o dispositivo funciona corretamente, mas há uma rede que causa o problema. Você sabe o que posso fazer com isso?

Logs:

dnsmasq-dhcp[1616]: DHCPDISCOVER(eth1) d4:a3:3d:34:55:95
dnsmasq-dhcp[1616]: DHCPOFFER(eth1) 192.168.1.180 d4:a3:3d:34:55:95
dnsmasq-dhcp[1616]: DHCPREQUEST(eth1) 192.168.1.77 d4:a3:3d:34:55:95
dnsmasq-dhcp[1616]: DHCPNAK(eth1) 192.168.1.77 d4:a3:3d:34:55:95 wrong server-ID
dnsmasq-dhcp[1616]: DHCPREQUEST(eth1) 192.168.1.14 1c:e6:2b:eb:08:41
dnsmasq-dhcp[1616]: DHCPNAK(eth1) 192.168.1.14 1c:e6:2b:eb:08:41 address not available
dnsmasq-dhcp[1616]: DHCPREQUEST(eth1) 192.168.1.14 1c:e6:2b:eb:08:41
dnsmasq-dhcp[1616]: DHCPNAK(eth1) 192.168.1.14 1c:e6:2b:eb:08:41 address not available
dnsmasq-dhcp[1616]: DHCPDISCOVER(eth1) 1c:e6:2b:eb:08:41
dnsmasq-dhcp[1616]: DHCPOFFER(eth1) 192.168.1.211 1c:e6:2b:eb:08:41
dnsmasq-dhcp[1616]: DHCPREQUEST(eth1) 192.168.1.14 1c:e6:2b:eb:08:41
dnsmasq-dhcp[1616]: DHCPNAK(eth1) 192.168.1.14 1c:e6:2b:eb:08:41 wrong server-ID

/ etc / config / dhcp:

config dnsmasq
    option domainneeded '1'
    option boguspriv '1'
    option filterwin2k '0'
    option localise_queries '1'
    option rebind_protection '0'
    option rebind_localhost '1'
    option local '/lan/'
    option domain 'lan'
    option expandhosts '1'
    option nonegcache '0'
    option authoritative '1'
    option readethers '1'
    option leasefile '/tmp/dhcp.leases'
    option resolvfile '/tmp/resolv.conf.auto'
    option nonwildcard '1'
    option localservice '1'

config dhcp 'lan'
    option interface 'lan'
    option start '100'
    option limit '150'
    option leasetime '12h'
    option dhcpv6 'server'
    option ra 'server'

config dhcp 'admin'
    option start '100'
    option limit '150'
    option leasetime '2h'
    option interface 'admin'

config dhcp 'wan'
    option interface 'wan wwan gsm'
    option ignore '1'

config odhcpd 'odhcpd'
    option maindhcp '0'
    option leasefile '/tmp/hosts/odhcpd'
    option leasetrigger '/usr/sbin/odhcpd-update'
    option loglevel '4'
    
por Lexander 06.07.2018 / 12:02

0 respostas

Tags