VPN ipsec Cisco881

Question

Eu tenho um roteador Cisco 881 com alguns PCs e um servidor Web conectado ao VDSL. Eu criei o dhcp, discador, etc ... mas aqui vem a parte difícil:

Eu queria ver meu servidor da Web da minha rede local, então criei um mapa de rotas, com um loopback, para poder acessar meu servidor da Web local e fazer login com minhas credenciais. Agora, posso ver a intranet que criei com o túnel IPsec. Qualquer um pode ajudar? O IP local 10.79.55.0 e o túnel Ipsec que estou tentando acessar são 192.168.100.0.

Eu também criei um grupo local de VPN, eu me conectei a ele com um cliente VPN, e eu posso ver o 192.168.100.0, mas quando estou no pc local, ele deve ver o 192.168.100.0 sem cliente VPN desde que eu tenho criou o túnel.

Nas listas de acesso, não é compatível com o ACL100, mas com o ACL PBR (quando estou em casa), mas quando me conecto ao VPN Client, ele corresponde ao ACL100

Aqui está a configuração:

Current configuration : 7832 bytes
!
! Last configuration change at 10:15:20 UTC Tue Jan 16 2018 by mnemonic
version 15.1
no service pad
service timestamps debug datetime msec
service timestamps log datetime msec
no service password-encryption
!
hostname *******
!
boot-start-marker
boot-end-marker
!
!
logging buffered 64000
enable password mnemonic
!
aaa new-model
!
!
aaa authentication login default local
aaa authentication login ciscocp_vpn_xauth_ml_1 local
aaa authentication login ciscocp_vpn_xauth_ml_2 local
aaa authorization exec default local 
aaa authorization network ciscocp_vpn_group_ml_1 local 
aaa authorization network ciscocp_vpn_group_ml_2 local 
!
!
!
!
!
aaa session-id common
!
memory-size iomem 10
service-module wlan-ap 0 bootimage autonomous
crypto pki token default removal timeout 0
!
crypto pki trustpoint TP-self-signed-3702956536
 enrollment selfsigned
 subject-name cn=IOS-Self-Signed-Certificate-3702956536
 revocation-check none
 rsakeypair TP-self-signed-3702956536
!
!
crypto pki certificate chain TP-self-signed-3702956536
 certificate self-signed 01
  *********
        quit
no ip source-route
!
!
!
ip dhcp excluded-address 10.79.55.1 10.79.55.9
ip dhcp excluded-address 10.79.55.101 10.79.55.254
ip dhcp excluded-address 10.79.55.15 10.79.55.20
!
ip dhcp pool ccp-pool1
 network 10.79.55.0 255.255.255.0
 dns-server 6******* 8.8.8.8 
 default-router 10.79.55.1 
!
!
ip cef
ip domain name ultima.gr
no ipv6 cef
!
!
multilink bundle-name authenticated
license udi pid CISCO881GW-GN-A-K9 sn FTX161880ZN
license boot module c880-data level advipservices
!
!
username *****privilege 15 password 0 *****
username ****privilege 15 password 0 ******
!
!
!
!
controller Cellular 0
!
! 
!
crypto isakmp policy 1
 encr 3des
 authentication pre-share
 group 2
crypto isakmp key toimoi address *******
!
crypto isakmp client configuration group EXTERNALS
 key ******
 dns 8.8.8.8
 pool SDM_POOL_1
 save-password
crypto isakmp profile ciscocp-ike-profile-1
   match identity group EXTERNALS
   client authentication list ciscocp_vpn_xauth_ml_2
   isakmp authorization list ciscocp_vpn_group_ml_2
   client configuration address respond
   virtual-template 1
!         
!
crypto ipsec transform-set ESP-3DES-SHA esp-3des esp-sha-hmac 
!
crypto ipsec profile CiscoCP_Profile1
 set isakmp-profile ciscocp-ike-profile-1
!
!
crypto map SDM_CMAP_1 1 ipsec-isakmp 
 description Tunnel to*********
 set peer ****
 set transform-set ESP-3DES-SHA 
 match address 100
!
!
!
!
!
interface Loopback0
 ip address 1.1.1.1 255.255.255.255
 ip nat inside
 ip virtual-reassembly in
!
interface FastEthernet0
 switchport mode trunk
 no ip address
!
interface FastEthernet1
 no ip address
!
interface FastEthernet2
 no ip address
!
interface FastEthernet3
 no ip address
!
interface FastEthernet4
 description $ETH-WAN$
 no ip address
 duplex auto
 speed auto
 pppoe-client dial-pool-number 1
!
interface Virtual-Template1 type tunnel
 ip unnumbered Dialer0
 tunnel mode ipsec ipv4
 tunnel protection ipsec profile CiscoCP_Profile1
!
interface wlan-ap0
 description Service module interface to manage the embedded AP
 ip unnumbered Vlan1
 arp timeout 0
!
interface Wlan-GigabitEthernet0
 description Internal switch interface connecting to the embedded AP
 switchport mode trunk
 no ip address
!
interface Cellular0
 no ip address
 encapsulation ppp
!
interface Vlan1
 ip address 10.79.55.1 255.255.255.0
 no ip redirects
 ip nat outside
 ip nat enable
 ip virtual-reassembly in
 ip tcp adjust-mss 1412
 ip policy route-map PBRNAT
!
interface Dialer0
 ip address negotiated
 no ip proxy-arp
 ip mtu 1452
 ip nat outside
 ip nat enable
 ip virtual-reassembly in
 encapsulation ppp
 ip policy route-map PBRNAT
 dialer pool 1
 dialer-group 1
 ppp authentication chap pap callin
 ppp chap hostname **********
 ppp chap password 0 *********
 ppp pap sent-username ****** password 0********
 crypto map SDM_CMAP_1
!
ip local pool SDM_POOL_1 10.79.55.15 10.79.55.20
ip forward-protocol nd
no ip http server
ip http authentication local
no ip http secure-server
!
!
ip nat pool NAT-POOL 10.79.55.0 10.79.55.254 netmask 255.255.255.0
ip nat source list 1 interface Dialer0 overload
ip nat source static tcp 10.79.55.100 25 interface Dialer0 25
ip nat source static tcp 10.79.55.100 110 interface Dialer0 110
ip nat source static tcp 10.79.55.100 443 interface Dialer0 443
ip nat source static tcp 10.79.55.100 80 interface Dialer0 80
ip nat source static tcp 10.79.55.100 53 interface Dialer0 53
ip nat source static tcp 10.79.55.100 389 interface Dialer0 389
ip nat source static tcp 10.79.55.100 26 interface Dialer0 26
ip nat source static tcp 10.79.55.100 44 interface Dialer0 44
ip nat source static tcp 10.79.55.100 143 interface Dialer0 143
ip nat source static tcp 10.79.55.100 995 interface Dialer0 995
ip nat source static tcp 10.79.55.100 993 interface Dialer0 993
ip nat source static tcp 10.79.55.100 8100 interface Dialer0 8100
ip nat source static tcp 10.79.55.100 3000 interface Dialer0 3000
ip nat source static tcp 10.79.55.100 1300 interface Dialer0 1300
ip nat source static tcp 10.79.55.100 21 interface Dialer0 21
ip nat source static tcp 10.79.55.100 5938 interface Dialer0 5938
ip nat source static udp 10.79.55.17 11155 interface Dialer0 11155
ip nat inside source static tcp 10.79.55.100 1000 interface Dialer0 1000
ip nat inside source list PBR pool NAT-POOL overload
ip nat inside source route-map SDM_RMAP_1 interface Dialer0 overload
ip route 0.0.0.0 0.0.0.0 Dialer0
!         
ip access-list extended PBR
 permit ip 10.79.55.0 0.0.0.255 192.168.100.0 0.0.0.255
 permit ip 10.79.55.0 0.0.0.255 any
!
access-list 1 remark INSIDE_IF=Vlan1
access-list 1 remark CCP_ACL Category=2
access-list 1 permit 10.79.55.0 0.0.0.255
access-list 100 remark CCP_ACL Category=4
access-list 100 remark IPSec Rule
access-list 100 permit ip 10.79.55.0 0.0.0.255 192.168.100.0 0.0.0.255
access-list 101 remark CCP_ACL Category=2
access-list 101 remark IPSec Rule
access-list 101 deny   ip 10.79.55.0 0.0.0.255 192.168.100.0 0.0.0.255
access-list 101 permit ip 10.79.55.0 0.0.0.255 any
dialer-list 1 protocol ip permit
dialer-list 2 protocol ip permit
!
!
!
!
route-map PBRNAT permit 10
 match ip address PBR
 set interface Loopback0
!
route-map SDM_RMAP_1 permit 1
 match ip address 101
!
!
!
!
control-plane
!
!
line con 0
line aux 0
line 2
 no activation-character
 no exec
 transport preferred none
 transport input all
line 3
 no exec
line vty 0 4
 password mnemonic
 transport input all
!
end