Estou tentando instalar duas placas wireless na minha máquina Debian Linux para usar o wifiphisher. Eu tenho duas placas: uma é um chipset Intel embutido; e o outro é TL-727N (que eu comprei 3 dias antes de ligar e não faz nada, mas ainda trabalhando em outras máquinas). Eu tentei instalar o seu driver, mas devido ao bug em um programa chamado Gcc eu não posso compilá-lo. Preciso de ajuda para configurar os dois cartões juntos - um para tocar e segundo para AP.
make:
root@kali:~/TL-WN727N_V4_150909/Driver# make
make -C UTIL/ osutil
make[1]: Entering directory '/root/TL-WN727N_V4_150909/Driver/UTIL'
cp -f os/linux/Makefile.6.util /root/TL-WN727N_V4_150909/Driver/UTIL/os/linux/Makefile
make -C /lib/modules/4.9.0-kali1-amd64/build SUBDIRS=/root/TL-WN727N_V4_150909/Driver/UTIL/os/linux modules
make[2]: Entering directory '/root/TL-WN727N_V4_150909/Driver/UTIL'
make[2]: *** /lib/modules/4.9.0-kali1-amd64/build: No such file or directory. Stop.
make[2]: Leaving directory '/root/TL-WN727N_V4_150909/Driver/UTIL'
Makefile:524: recipe for target 'osutil' failed
make[1]: *** [osutil] Error 2
make[1]: Leaving directory '/root/TL-WN727N_V4_150909/Driver/UTIL'
Makefile:3: recipe for target 'all' failed
make: *** [all] Error 2
iwconfig:
root@kali:~# iwconfig
wlan0 IEEE 802.11 ESSID:off/any
Mode:Managed Access Point: Not-Associated Tx-Power=15 dBm
Retry short limit:7 RTS thr:off Fragment thr:off
Encryption key:off
Power Management:off
eth0 no wireless extensions.
AP no wireless extensions.
lo no wireless extensions.
dmesg:
root@kali:~# dmesg | tail -n 50
[13126.708245] nouveau 0000:01:00.0: therm: temperature (86 C) went below the 'fanboost' threshold
[13176.308348] nouveau 0000:01:00.0: therm: temperature (90 C) hit the 'fanboost' threshold
[13278.855143] nouveau 0000:01:00.0: therm: temperature (96 C) hit the 'downclock' threshold
[13282.133673] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[13344.516595] nouveau 0000:01:00.0: therm: temperature (92 C) went below the 'downclock' threshold
[13597.159622] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[13842.185005] nouveau 0000:01:00.0: therm: temperature (86 C) went below the 'fanboost' threshold
[13925.193106] nouveau 0000:01:00.0: therm: temperature (90 C) hit the 'fanboost' threshold
[14024.856263] nouveau 0000:01:00.0: therm: temperature (96 C) hit the 'downclock' threshold
[14131.684081] nouveau 0000:01:00.0: therm: temperature (92 C) went below the 'downclock' threshold
[14247.062042] iwl3945 0000:0c:00.0: Can't stop Rx DMA.
[14302.541034] nouveau 0000:01:00.0: therm: temperature (96 C) hit the 'downclock' threshold
[14328.359880] nouveau 0000:01:00.0: therm: temperature (92 C) went below the 'downclock' threshold
[15340.965792] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[15515.888305] nouveau 0000:01:00.0: therm: temperature (86 C) went below the 'fanboost' threshold
[15530.082105] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[15810.797220] nouveau 0000:01:00.0: therm: temperature (90 C) hit the 'fanboost' threshold
[15845.082574] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[15959.688788] nouveau 0000:01:00.0: therm: temperature (86 C) went below the 'fanboost' threshold
[16018.009983] nouveau 0000:01:00.0: therm: temperature (90 C) hit the 'fanboost' threshold
[16160.099500] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[16475.141778] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[16790.140229] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[17105.123931] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[17420.101578] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[17627.898035] nouveau 0000:01:00.0: therm: temperature (95 C) hit the 'downclock' threshold
[17680.185414] nouveau 0000:01:00.0: therm: temperature (92 C) went below the 'downclock' threshold
[17735.090562] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[18050.085772] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[18365.105816] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[18456.564163] usb 6-2: USB disconnect, device number 2
[18462.564085] usb 2-4: new high-speed USB device number 4 using ehci-pci
[18462.723701] usb 2-4: New USB device found, idVendor=148f, idProduct=7601
[18462.723706] usb 2-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[18462.723709] usb 2-4: Product: 802.11 n WLAN
[18462.723712] usb 2-4: Manufacturer: MediaTek
[18462.723715] usb 2-4: SerialNumber: 1.0
[18462.988150] usb 2-4: reset high-speed USB device number 4 using ehci-pci
[18463.139553] mt7601u 2-4:1.0: ASIC revision: 76010001 MAC revision: 76010500
[18463.160572] mt7601u 2-4:1.0: firmware: direct-loading firmware mt7601u.bin
[18463.160583] mt7601u 2-4:1.0: Firmware Version: 0.1.00 Build: 7640 Build time: 201302052146____
[18463.543915] mt7601u 2-4:1.0: Warning: unsupported EEPROM version 0d
[18463.543920] mt7601u 2-4:1.0: EEPROM ver:0d fae:00
[18463.544787] mt7601u 2-4:1.0: EEPROM country region 01 (channels 1-13)
[18463.784706] ieee80211 phy1: Selected rate control algorithm 'minstrel_ht'
[18463.797864] usbcore: registered new interface driver mt7601u
[18463.838722] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[18463.871040] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[18466.315205] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[18466.366319] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready