Como obter um driver sem fio com injeção

0

Relacionado possivelmente relacionados: Como conhecer meu placa wireless tem injeção habilitada?

NOTA: Eu faço principalmente javascript como programador, então perdoe meu noobness, qualquer orientação de como eu poderia ter percebido isso seria muito apreciado.

Deixe-me começar pelo final, parece que eu não tenho injeção no meu disco:

$ sudo airmon-ng start wlp3s0


Found 5 processes that could cause trouble.
If airodump-ng, aireplay-ng or airtun-ng stops working after
a short period of time, you may want to kill (some of) them!

PID Name
706 avahi-daemon
734 avahi-daemon
765 NetworkManager
1097    wpa_supplicant
4260    dhclient
Process with PID 4260 (dhclient) is running on interface wlp3s0


Interface   Chipset     Driver

wlp3s0      Unknown     ath10k_pci - [phy0]
                (monitor mode enabled on mon0)

$ sudo aireplay-ng -9 mon0               
17:18:58  Trying broadcast probe requests...
17:19:00  No Answer...
17:19:00  Found 1 AP 
17:19:00  Trying directed probe requests...
17:19:00  10:FE:ED:8A:EF:D0 - channel: 6 - 'network name'
17:19:06   0/30:   0%

O link que eu postei acima sugeriu que isso poderia ocorrer devido ao uso do driver wifi de código fechado:

This is because you probably used the default (closed-source) drivers, many of which do not support injection.

You need to use the compat-wireless package, to compile your own drivers and use those instead ... as well as patch them to allow packet injection. At minimum, you need the mac80211.compat08082009.wl_frag+ack_v1.patch

Meu driver é ath10k_pci : (omiti as informações da interface Ethernet)

$ sudo lshw -C network
*-network
       description: Wireless interface
       product: QCA6174 802.11ac Wireless Network Adapter
       vendor: Qualcomm Atheros
       physical id: 0
       bus info: pci@0000:03:00.0
       logical name: wlp3s0
       version: 32
       serial: c8:ff:28:00:90:51
       width: 64 bits
       clock: 33MHz
       capabilities: pm msi pciexpress bus_master cap_list ethernet physical wireless logical
       configuration: broadcast=yes driver=ath10k_pci driverversion=4.4.0-59-generic firmware=WLAN.RM.2.0-00180-QCARMSWPZ-1 ip=192.168.0.108 latency=0 link=yes promiscuous=yes wireless=IEEE 802.11abgn
       resources: irq:127 memory:a1000000-a11fffff
    
por Adam Goldman 15.01.2017 / 17:33

0 respostas