O encaminhamento de porta não funciona para o meu roteador wifi

Question

Eu fiz uma pergunta semelhante pergunta antes. Meu MacBook Pro está conectado à Internet através do roteador sem fio U.S. Cellular. Meu ip público 130.180.XXX.XXX .

ifconfig

  prod_deploy git:(master) ifconfig 
lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> mtu 16384
    options=3<RXCSUM,TXCSUM>
    inet6 ::1 prefixlen 128 
    inet 127.0.0.1 netmask 0xff000000 
    inet6 fe80::1%lo0 prefixlen 64 scopeid 0x1 
    nd6 options=1<PERFORMNUD>
gif0: flags=8010<POINTOPOINT,MULTICAST> mtu 1280
stf0: flags=0<> mtu 1280
en0: flags=8863<UP,BROADCAST,SMART,RUNNING,SIMPLEX,MULTICAST> mtu 1500
    ether 98:01:a7:ad:64:8f 
    inet6 fe80::9a01:a7ff:fead:648f%en0 prefixlen 64 scopeid 0x4 
    inet 192.168.1.165 netmask 0xffffff00 broadcast 192.168.1.255
    nd6 options=1<PERFORMNUD>
    media: autoselect
    status: active
en1: flags=963<UP,BROADCAST,SMART,RUNNING,PROMISC,SIMPLEX> mtu 1500
    options=60<TSO4,TSO6>
    ether 4a:00:06:cf:15:10 
    media: autoselect <full-duplex>
    status: inactive
en2: flags=963<UP,BROADCAST,SMART,RUNNING,PROMISC,SIMPLEX> mtu 1500
    options=60<TSO4,TSO6>
    ether 4a:00:06:cf:15:11 
    media: autoselect <full-duplex>
    status: inactive
bridge0: flags=8863<UP,BROADCAST,SMART,RUNNING,SIMPLEX,MULTICAST> mtu 1500
    options=63<RXCSUM,TXCSUM,TSO4,TSO6>
    ether 9a:01:a7:da:c9:00 
    Configuration:
        id 0:0:0:0:0:0 priority 0 hellotime 0 fwddelay 0
        maxage 0 holdcnt 0 proto stp maxaddr 100 timeout 1200
        root id 0:0:0:0:0:0 priority 0 ifcost 0 port 0
        ipfilter disabled flags 0x2
    member: en1 flags=3<LEARNING,DISCOVER>
            ifmaxaddr 0 port 5 priority 0 path cost 0
    member: en2 flags=3<LEARNING,DISCOVER>
            ifmaxaddr 0 port 6 priority 0 path cost 0
    nd6 options=1<PERFORMNUD>
    media: <unknown type>
    status: inactive
p2p0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 2304
    ether 0a:01:a7:ad:64:8f 
    media: autoselect
    status: inactive
awdl0: flags=8943<UP,BROADCAST,RUNNING,PROMISC,SIMPLEX,MULTICAST> mtu 1484
    ether e2:5c:85:21:55:1f 
    inet6 fe80::e05c:85ff:fe21:551f%awdl0 prefixlen 64 scopeid 0x9 
    nd6 options=1<PERFORMNUD>
    media: autoselect
    status: active
vboxnet0: flags=8943<UP,BROADCAST,RUNNING,PROMISC,SIMPLEX,MULTICAST> mtu 1500
    ether 0a:00:27:00:00:00 
    inet 192.168.99.1 netmask 0xffffff00 broadcast 192.168.99.255

Então, meu endereço interno é 192.168.1.165

No meu Macbook Pro, um servidor web é executado na porta 3001 . Eu posso acessá-lo pelo link .

Eu fiz o mapeamento nas configurações do firewall do roteador wifi: Mas isso não me ajudou.

Eu gostaria de fornecer acesso ao meu servidor da Web para alguém de fora por meio do endereço link .

ATUALIZAÇÃO: Parece que o 3001 está aberto para 192.168.1.165 :