Erros de placa de rede após a atualização do squeeze para jessie

0

Nós atualizamos um de nossos roteadores centrais, que estava terrivelmente desatualizado, via apt-get dist-upgrade do Debian Squeeze sobre Wheezy para Jessie.

Mas agora vemos os seguintes erros em dmesg :

[Tue Apr 12 22:17:55 2016] e1000 0000:09:03.0 wi22: Detected Tx Unit Hang
  Tx Queue             <0>
  TDH                  <2>
  TDT                  <5b>
  next_to_use          <5b>
  next_to_clean        <0>
buffer_info[next_to_clean]
  time_stamp           <3abbd6>
  next_to_watch        <4>
  jiffies              <3abd34>
  next_to_watch.status <0>
[Tue Apr 12 22:17:57 2016] e1000 0000:09:03.0 wi22: Detected Tx Unit Hang
  Tx Queue             <0>
  TDH                  <2>
  TDT                  <5b>
  next_to_use          <5b>
  next_to_clean        <0>
buffer_info[next_to_clean]
  time_stamp           <3abbd6>
  next_to_watch        <4>
  jiffies              <3abf29>
  next_to_watch.status <0>
[Tue Apr 12 22:17:59 2016] e1000 0000:09:03.0 wi22: Detected Tx Unit Hang
  Tx Queue             <0>
  TDH                  <2>
  TDT                  <5b>
  next_to_use          <5b>
  next_to_clean        <0>
buffer_info[next_to_clean]
  time_stamp           <3abbd6>
  next_to_watch        <4>
  jiffies              <3ac11e>
  next_to_watch.status <0>
[Tue Apr 12 22:18:01 2016] e1000 0000:09:03.0 wi22: Detected Tx Unit Hang
  Tx Queue             <0>
  TDH                  <2>
  TDT                  <5b>
  next_to_use          <5b>
  next_to_clean        <0>
buffer_info[next_to_clean]
  time_stamp           <3abbd6>
  next_to_watch        <4>
  jiffies              <3ac313>
  next_to_watch.status <0>
[Tue Apr 12 22:18:03 2016] e1000 0000:09:03.0 wi22: Reset adapter
[Tue Apr 12 22:18:03 2016] br50: port 2(wi22.50) entered disabled state
[Tue Apr 12 22:18:03 2016] br60: port 2(wi22.60) entered disabled state
[Tue Apr 12 22:18:03 2016] br161: port 1(wi22.161) entered disabled state
[Tue Apr 12 22:18:03 2016] br170: port 7(wi22.170) entered disabled state
[Tue Apr 12 22:18:03 2016] e1000: wi22 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: None
[Tue Apr 12 22:18:03 2016] br50: port 2(wi22.50) entered forwarding state
[Tue Apr 12 22:18:03 2016] br50: port 2(wi22.50) entered forwarding state
[Tue Apr 12 22:18:03 2016] br60: port 2(wi22.60) entered forwarding state
[Tue Apr 12 22:18:03 2016] br60: port 2(wi22.60) entered forwarding state
[Tue Apr 12 22:18:03 2016] br161: port 1(wi22.161) entered forwarding state
[Tue Apr 12 22:18:03 2016] br161: port 1(wi22.161) entered forwarding state
[Tue Apr 12 22:18:03 2016] br170: port 7(wi22.170) entered forwarding state
[Tue Apr 12 22:18:03 2016] br170: port 7(wi22.170) entered forwarding state

Isso acontece para todas as interfaces, que são de fibra ótica de 1 Gbit, a cada 2 segundos.

Alguns usuários até relataram uma conexão instável.

O que isso significa? É por causa de hardware desatualizado?

Estamos planejando comprar um novo, mas como podemos resolver o problema até que o novo roteador esteja disponível?

    
por Hendrik 12.04.2016 / 22:50

1 resposta

0

O motivo do erro pode ser um bug no kernel atual.

link

Nós fizemos o downgrade do kernel para 3.2.0-4 e ele funciona novamente.

    
por 14.04.2016 / 22:54