Estou tentando recuperar dados do laptop HP que está executando o Windows, mas não inicializa mais. Eu posso iniciá-lo com o Knoppix.
$ fdisk /dev/sda
Command (m for help): p
Disk /dev/sda: 465.8 GiB, 500107862016 bytes, 976773168 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
Disklabel type: dos
Disk identifier: 0xf74225fc
Device Boot Start End Sectors Size Id Type
/dev/sda1 63 2047 1985 992.5K 42 SFS
/dev/sda2 * 2048 409599 407552 199M 42 SFS
/dev/sda3 409600 895070207 894660608 426.6G 42 SFS
/dev/sda4 895070208 976764927 81694720 39G 42 SFS
Partition 1 does not start on physical sector boundary.
A montagem de /dev/sda3
e /dev/sda4
funciona, mas parece que eles não correspondem à grande partição C:
.
Mouting /dev/sda1
e /dev/sda2
falha. Espera-se?
$ mount -o ro /dev/sda1 /mnt/sda1
mount: wrong fs type, bad option, bad superblock on /dev/sda1,
missing codepage or helper program, or other error
In some cases useful info is found in syslog - try
dmesg | tail or so.
$ mount -o ro /dev/sda2 /mnt/sda2
mount: wrong fs type, bad option, bad superblock on /dev/sda1,
missing codepage or helper program, or other error
In some cases useful info is found in syslog - try
dmesg | tail or so.
$ dmesg | tail
[ 4589.100349] ata1.00: status: { DRDY ERR }
[ 4589.100353] ata1.00: error: { UNC }
[ 4589.103188] ata1.00: configured for UDMA/100
[ 4589.103227] sd 0:0:0:0: [sda] tag#9 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[ 4589.103237] sd 0:0:0:0: [sda] tag#9 Sense Key : Medium Error [current] [descriptor]
[ 4589.103246] sd 0:0:0:0: [sda] tag#9 Add. Sense: Unrecovered read error - auto reallocate failed
[ 4589.103255] sd 0:0:0:0: [sda] tag#9 CDB: Read(10) 28 00 00 06 40 80 00 00 08 00
[ 4589.103262] blk_update_request: I/O error, dev sda, sector 409728
[ 4589.103270] Buffer I/O error on dev sda2, logical block 16, async page read
[ 4589.103316] ata1: EH complete
...
Isso parece uma partição de recuperação HP:
/mnt/sda4$ ls
boot Desktop.ini hp HP_WSD.dat recovery RM_Reserve
bootmgr FactoryUpdate HPSF_Rep.txt preload $RECYCLE.BIN System Volume Information
Portanto, você esperaria que sda3
correspondesse à grande C:
partion (pasta do windows, pasta do usuário). Mas isso não parece ser o caso:
/mnt/sda3$ ls
bci2k bci data Data EEG BCI $RECYCLE.BIN System Volume Information
Alguma idéia?